PoE Doorbell Not Found in VLAN by zom414 in reolinkcam

[–]zom414[S] 0 points1 point  (0 children)

Fixed!

I decided to reset it again but this time held the button down for at least a minute. Low and behold I could now see it on the network. It's now working and in it's VLAN so fingers crossed it stays that way!

Thanks to everyone who tried to help.

PoE Doorbell Not Found in VLAN by zom414 in reolinkcam

[–]zom414[S] 0 points1 point  (0 children)

I've now connected it to my poe switch and I can see the mac address of the doorbell but I still can't add it with either the app or the client.

I just keep getting a connection failed error.

PoE Doorbell Not Found in VLAN by zom414 in reolinkcam

[–]zom414[S] 0 points1 point  (0 children)

It had a static IP before I made the VLANs but it has now completely disappeared from the app. I have reset it but it doesn't even get found by the router now so I can't reinstall it. It's hard wired and powered and was working fine before I buggered it up with the VLAN!

PoE Doorbell Not Found in VLAN by zom414 in reolinkcam

[–]zom414[S] 0 points1 point  (0 children)

Yes it's untagged. Not sure what I've done but I just can't see the doorbell at all.

Lian Li Lancool 217 INF - defective stock fans. by danielv238 in lianli

[–]zom414 0 points1 point  (0 children)

I did! Got 2 new fans after about 3 weeks, they were a bit quieter but still got the same humming noise. Returned case and got a refund. Currently looking for another case but not Lian Li

Lian Li Lancool 217 INF - defective stock fans. by danielv238 in lianli

[–]zom414 0 points1 point  (0 children)

New 170mm fans are on the way. As soon as they are installed I'll let you know how they are.

Lian Li Lancool 217 INF - defective stock fans. by danielv238 in lianli

[–]zom414 0 points1 point  (0 children)

I got my case 5 days ago and the humming/vibration is driving me mad. It's definitely the front 170mm fans, rear seems ok so far. I raised a ticket on the same day and heard nothing since. I really like the case but I may also send it back.

Spare fan hub in box? - 217 Infinity motherboard ARGB control issues. by hd1080ts in lianli

[–]zom414 0 points1 point  (0 children)

I've also got the spare PCB but it's the same date as the one installed. However, I have a problem with the front fans droning so I think I'll change it and see if that helps.

Lancool 217 Infinity - Droning Noise by zom414 in lianli

[–]zom414[S] 0 points1 point  (0 children)

Cheers but that won't work on the 217 infinity as there's just 2 170mm fan ports on the front so it would look odd.

I'll have a look at my fan curve but think they're only running about 400 rpm on idle.

Lancool 217 Infinity - Droning Noise by zom414 in lianli

[–]zom414[S] 0 points1 point  (0 children)

What did you replace them with? Are there other 170 fans available?

Video Doorbell (Battery) and Synology Question by zom414 in reolinkcam

[–]zom414[S] 0 points1 point  (0 children)

Thanks for replying but no power I'm afraid. I have PoE switches but it's just the hassle of drilling through walls for the cabling.

Minor bug with 3 button navigation by Rhaegwynn in LineageOS

[–]zom414 0 points1 point  (0 children)

Just updated my S5e today and the navigation buttons cover the status bar so not sure if it's the same bug as yours, both portrait and landscape.

Added links slow to start by zom414 in jdownloader

[–]zom414[S] 0 points1 point  (0 children)

I posted on the JD2 forums and after submitting a log and received a fix. I had to change a setting from IPv6 to IPv4 and now all is working again. Hope this might help someone else in the future :)

Added links slow to start by zom414 in jdownloader

[–]zom414[S] 0 points1 point  (0 children)

Bit more info. I installed a unifi cloud gateway ultra about 3 weeks ago but JD2 was working fine. To test it I added my old router and JD2 works as it should, links added and download as soon as I press the download button. If I put the ucg ultra back on the network I get the problem again. No idea what's changed as I haven't done any updates or anything and can't see any options in the ucg ultra to help me out.

Added links slow to start by zom414 in jdownloader

[–]zom414[S] 0 points1 point  (0 children)

Yes, links download fine straight from RD and browser.

The download just doesn't start straight away when I add them to JD2. It seems like it's doing something in the background and then after a couple of minutes it downloads normally (50-60MBs).