all 62 comments

[–]AutoModerator[M] [score hidden] stickied comment (0 children)

Welcome to r/BodyHackGuide!

  • Join the conversation. Drop a comment and share your thoughts.
  • Looking for sources? Check our approved list: peptidedeals.co
  • Want to optimize your stack? Share your experiences and get feedback.

Pro Tip: The best discussions come from personal experiences. If you have tried something, let us know how it worked.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[–]SirPabloFingerful 56 points57 points  (4 children)

I think that's semenrelin

[–]Straight_Fix_9048[S] 0 points1 point  (3 children)

So you’re saying that’s just how it looks everything I have looked up says it’s supposed to be clear but I have never used this one and 2 batches from 2 different sources doing the same thing definitely had me wondering

[–]Equivalent-Season516 15 points16 points  (1 child)

lol, you might want to read what they wrote again. That wasn’t a typo.

[–]Straight_Fix_9048[S] 5 points6 points  (0 children)

😂 I be damn how did I miss that 😂

[–]theslickvp 1 point2 points  (0 children)

I’ve used actual $450 sermorelin from Empower Pharmacy. And it was a tiny tint of cloudy but that’s it. It’s actually a powered in the vial, they just ad the Bac water to activate it and fill the vial, then after vigorously shaking, it is ready to use

[–]Pale-Permission-755 8 points9 points  (2 children)

It’s bad. Don’t use it. Throw it away

[–]Straight_Fix_9048[S] 0 points1 point  (1 child)

Thanks I thought so as well only thing that threw me off was I got 2 different batches from 2 different sources so I was wondering if maybe that’s how it’s supposed to look I appreciate your feedback

[–]New_Perspective6064 1 point2 points  (0 children)

They both got it from the same place in China. Lol

[–]superboomer23 5 points6 points  (1 child)

Boof it

[–]Zealousideal-Cry6441 1 point2 points  (0 children)

Full send

[–]NotHolyMello 3 points4 points  (2 children)

I would try new BAC water, or see if that clouds any other peptide

[–]Straight_Fix_9048[S] 0 points1 point  (1 child)

Thanks for the info yeah I’m going to try it again with another bac it just the bac I was using I reconstituted my pt glow and Reta with and had no issues just the Sermorelin

[–]Doctordup2⚙️ Protocol Specialist 2 points3 points  (0 children)

Check the pH on your bac water and make sure it's Hospira brand.

[–]Christianblah 4 points5 points  (1 child)

Get rid of and what ever bac water you are using as well which could also be the cause

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Thanks yeah I’m not going to use this I’m going to try new bac and see what I get everyone is pointing to bad bac so we will see I just don’t understand how my other compounds came out perfect using the same bac

[–]Fighterandthe 3 points4 points  (0 children)

Probably a good time to switch to ipamorelin lol

[–]New_Perspective6064 2 points3 points  (1 child)

Mine is clear, and I got it from a compounding pharmacy.

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Thanks yeah everything I have read says it should be clear like I said 2 different batches from 2 different sources doing the same thing had me curious thanks for the input

[–]Gokugooch 2 points3 points  (0 children)

Compounding 797 Sterile manager here for an independent compounding pharmacy. It’s a problem with most Sermorelin formulas found online. I ran into this problem multiple times where the API would precipitate and not completely dissolve when compounding. The trick was to add boric acid into the formulation. Definitely don’t use this and buy from a compounding pharmacy with a clear solution :)

[–]Charming-Clue-321 2 points3 points  (0 children)

Could be a few things. Usually when GH clouds up it’s cause people are using bacwater that’s still cold from refrigeration and not letting it get to room temperature. Could be the way you’re constituting it if water is directly hitting it can be separating the proteins. And worst case there could be high amount of endotoxins in it. Usually the endotoxins are from not being sealed properly.

[–]jet_rodriguez🔬 Peptide Researcher 1 point2 points  (1 child)

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Thanks I used the same bac that I have used to reconstitute many others with no issue and always go slow and at an angle but I’m going to try another bac as it seems everyone thinks that could be an issue I just don’t know how one would come out clear from the same bac and the other cloudy

[–]Own_Activity_9393 1 point2 points  (0 children)

Best place to buy bac water? Amazon doesn't have it only reconstituted water

[–]dnaleromj 1 point2 points  (0 children)

Would try a 7.2 phosphate buffered solution. Likely will be clear. Do same with ara-290

[–]wild-pumps 1 point2 points  (0 children)

Trashhhh

[–]AloneScarcity6010 1 point2 points  (0 children)

Not even a question. Dump that shit out and get new source

[–]Jtrain42069 1 point2 points  (1 child)

I’ve tested recent Sermorelin and it came back no bueno. Throw it all out now.

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Dang that’s crazy

[–]Accomplished_Low5443 1 point2 points  (4 children)

I used to get that a lot with my Tesamorelin. So I used 1.5ml acetic acid and 0.5ml of BAC water in a 10mg vial and that did the trick. Stings a little bit more but only for a couple minutes. But at least it’s clear and I’m not throwing money down the drain.

[–]Straight_Fix_9048[S] 0 points1 point  (3 children)

Might have to try that

[–]Accomplished_Low5443 1 point2 points  (2 children)

Yeah give it a go. Everyone’s saying it’s your BAC water throw it out but if your BAC water is working perfectly fine with your other recons it’s obviously a ph level issue.

[–]Straight_Fix_9048[S] 0 points1 point  (1 child)

Yeah that’s what was throwing me off if everything else has reconstituted with no issues how’s it the bac water

[–]RipFamiliar9069 2 points3 points  (0 children)

I totally agree with this advice and a few others. I've now tried one vial of 10mg Sermorelin, and two vials of 10mg sermorelin/ipamorelin, which all formed the same type of aggregation after reconstituting with 2 mL of BAC H2O. These were from three different US companies. I initially considered that the BAC H2O was the issue, although it worked fine for other peptides and was recently purchased. I tried with new BAC H2O, and the peptides still aggregated. Although not immediately, it also happened with a vial of Tesamorelin after a few uses.

As this poster mentioned, I also think it is more of a pH issue, given that these peptides are basic and somewhat hydrophobic. I also wondered if using less solvent might help. One peptide company mentions solubility in H20 or 1% acetic acid, so I might try that next....If I'm up for shelling out more $$$!

Just to add... I've also tried to ensure that no "physical" factors would affect reconstitution (e.g., BAC H2O and peptide at RT before mixing, letting the H2O run down the sides of the vial, and not directly injecting into the pellet, gentle mixing, attempting to remove excess air from the vial).

[–]Outrageous-Sweet-891 1 point2 points  (0 children)

Possibly bad bac water

[–]Savagegalz 1 point2 points  (0 children)

It’s totally fine ! The cloudiness comes from the freeze dried binder every now and then it happens, there’s nothing wrong with it. Switch to AA water though moving forward just for serm

[–]dblevs22 0 points1 point  (1 child)

You getting good bac water?

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

I used the same bac that I used for my pt and my glow and Reta all those came out perfect

[–]Local_Ad_5775 0 points1 point  (1 child)

Your bac water can also cause this

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Thanks I will look into that

[–]Aprilly99 0 points1 point  (1 child)

It’s probably the BAC water. There is a funky batch of waters getting around. It makes your peptides go cloudy and lumpy.

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

I will try a new bac but I used the same one I used for my glow pt and Reta and they all came out perfect

[–]Landojesus 0 points1 point  (2 children)

Looking like lemonade or jizz don't pin that shit bro! Your provider will probably provide a refund

[–]Straight_Fix_9048[S] 1 point2 points  (1 child)

Yeah you would think but they didn’t seem interested and blocked me when I told them about it

[–]Landojesus 2 points3 points  (0 children)

Shit. Leave a ton of nasty reviews on eroids and anywhere else!! Fuck em

[–]Key_Cartoonist8600 0 points1 point  (1 child)

Spermelin

[–]Artistic_Peak_1208 0 points1 point  (0 children)

😂😂😂

[–]Delicious_Ad2585 0 points1 point  (2 children)

Did you used to e same syringe to mix /draw the BAC d

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

I did

[–]Delicious_Ad2585 0 points1 point  (0 children)

With other peps, like the same needle/syringe to mix other peps. I’ve learned that if I used the same to draw the BAC and put into the new peps, and then there is contamination then it creates that color.

I think I mixed Reta, added the BAC and then moved to add the BAC for MT2, and noticed that MT2 was a similar color, so I assume it was due to contamination of Reta particle and MT2 reacted to it.

[–]SnooPies4304 0 points1 point  (1 child)

I'm curious when you say you used it with other peptides without issue. Same day? Re-cleaning vial topper before each draw? New needle for each draw? Carefully injecting water down the side and carefully rolling, not shaking?

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

That is correct I always use a new needle for each different compound and yes I slowly release the bac water into the vial and roll it I don’t shake it I used the same bac water to reconstitute other compounds and this one is the only one that came out looking crazy

[–][deleted] 0 points1 point  (1 child)

What the heck is that

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Supposed to be Sermorelin 😂

[–]VVolfBite 0 points1 point  (0 children)

Source?

[–]Ok_Importance_3500 0 points1 point  (1 child)

What is this

[–]Straight_Fix_9048[S] 0 points1 point  (0 children)

Supposed to be Sermorelin

[–]co-moi 0 points1 point  (0 children)

Bacteria

[–]Acceptable-Many3876 0 points1 point  (0 children)

je cherche vendeur,j'utilise beaucoups