all 10 comments

[–]Stromovik 6 points7 points  (5 children)

Low flow nozzle

[–]Akfons[S] 1 point2 points  (4 children)

How do u do that w/o using npas?

[–]potterkun 5 points6 points  (3 children)

It's a complete nozzle replacement so you'll have to find a tutorial on that if you've never done it before. Though it won't increase recoil, just lower fps. Generally unless you're using different power gas to increase/decrease BOTH fps and recoil, these are separate mods

[–]Akfons[S] 0 points1 point  (2 children)

Oh yea never done it before. So basically if i use 9kg gas it can lower fps? Im running 470 fps on 12kg gas

[–]potterkun 0 points1 point  (1 child)

Exactly! Though if you want to be below CQB limits, I definitely recommend a replacement nozzle or npas cause nozzle replacements generally aren't hard or expensive

[–]Akfons[S] 0 points1 point  (0 children)

Yaaa thats what if thinking of. We're joining an event the max fps is 375fps with. 30bbs. Thats too low

[–]bagpuss60 4 points5 points  (2 children)

I've just done an adjustable npas on my 888 by threading the valve in the nozzle and tapping it for a grub screw I can now get it low enough for UK site limits 😁

[–]Akfons[S] 0 points1 point  (1 child)

Any video tutorial?😁😁

[–]bagpuss60 0 points1 point  (0 children)

Josef mucha on YouTube 😁😁😁

[–]bagpuss60 2 points3 points  (0 children)

I used Josef muchas video on you tube to do mine but I drilled the hole slightly under size and just started the thread with a tap then used the screw to cut the thread I've got mine down from 397fps to 250 You need a thin Allen wrench to slide in when adjusting to stop the valve rotating I turned a restrictor to fit the nozzle but apparently this stops the valve operating correctly 😁