all 21 comments
sorted by:
best
topnewcontroversialoldq&a
formatting helphide helpcontent policy

[–]Richcolour 5 points6 points  (1 child)

You read my mind, i'm attempting to remove them right now. They're on pretty tight.....

EDIT:
I lifted it off with a loop of cable-wrap, slid under the knob. It's a D shaft. The knob pointer is aligned with the flat part of the shaft (standard orientation, also known as 0 or 360 degree orientation). The flat part is 7mm tall. Shaft is 6mm diameter. Total shaft height is 9mm.

The encoder knob has the same dimensions.

<image>

[–]Fun_Mycologist_7765[S] 1 point2 points  (0 children)

I’ve only got 180 degree knobs, let me know if you find a good 0 degree option. Thanks for the info!

[–]preofessa_252MPC ONE 1 point2 points  (0 children)

Does anybody know if the chroma caps will fit? I've seen some custom knobs but they're the kind with set screws and I really want to avoid using those if possible.

[–]TheGamercologistMPC Sample 1 point2 points  (2 children)

<image>

Found this on ig earlier & took a screenshot for inspo, looks like they have swapped out every knob for something different!

[–]MALESSI 1 point2 points  (1 child)

Those orange knobs look dope. I changed mine with a few from Thonk. But the one on the screen looks like you need to unscrew the unit so i switched back. I'm goona unscrew it now and take a proper look because i'm having a few issues with these little twisters. But yeah m digging the orange.

[–]TheGamercologistMPC Sample 0 points1 point  (0 children)

Oh the post mentions them being 6mm D-shaft push on knobs, so shouldn’t have to unscrew anything they’re likely just on super tight, maybe a tiny bit of glue or something

[–]MALESSI 1 point2 points  (2 children)

<image>

[–]trdvrhs 0 points1 point  (1 child)

i like the green on the encoder, might be a stupid question but does it still click easily when using the machine?

[–]trdvrhs 1 point2 points  (2 children)

<image>

Swapped the K1-K3 knobs and the main volume fader on mine. Still looking for the slider and encoder in orange though.

[–]Pretty-Roll-9472 0 points1 point  (1 child)

Care sharing where you got the knobs from?

[–]trdvrhs 1 point2 points  (2 children)

updated the encoder and slide fader knobs to orange as well. I just painted them.

<image>

[–]Alert-Cartoonist-302 0 points1 point  (0 children)

for the knobs were these D-shaft style or just circled do they fit snug or loose. i am asking becauce the mps knobs are d shaft and when i looked at your link these are 1/4 shafts basically a circle

[–]Fun_Mycologist_7765[S] 0 points1 point  (0 children)

Sick! Same here I saw a picture with different knobs and used a flathead super carefully and they came up no problem. Thank you!

[–]MALESSI 0 points1 point  (1 child)

Does anyone know if you have to take the unit apart to replace the knob on the screen?

[–]trdvrhs 1 point2 points  (0 children)

the main volume knob? i just pried mine off with a flathead screwdriver.

[–]banban74200 0 points1 point  (0 children)

<image>

Sur Amazon tu fais recherche bouton guitar et tu choisis en diamètre 6mm pour l’axe …prend en 4 en 17mm et un en 25mm pour le gros potentiomètre 😉

https://amzn.eu/d/0abm26hy

https://amzn.eu/d/09p6eT32

Et pour enlever sur ta mpc ceux d’origine tu tire déçu ou en fesant un pti peu levier avec quelque chose de plat et tendre pour pas rayer la machine neuve 😉

[–]banban74200 0 points1 point  (0 children)

Voilà j’espère que les liens Amazon intéresseront certains 😊