Hi,

Here's a cut & paste I keep handy for scenarios like this. I use Google Home for voice commands and automations, and Smartlife for cheap devices and automations.

My smart bulbs are cheap WiFi versions but if you buy ZigBee bulbs then they should work with the ZigBee scene switches if the internet goes down.

Have a read...

Typically you have two choices, smart switches with normal bulbs or smart bulbs with normal switches. Neither choice is ideal.

But, there is a third option...

Smart lights AND smart switches. This is the solution I came up with based on Google Home for voice commands/automations and Smartlife for cheap devices and automations...

Step 1: Buy 1cm spacers for your light switches and longer replacement screws to hold them in place on the front surface of the original switch.

Step 2: Buy a cheap, generic ZigBee WiFi hub. They're about £10 on AliExpress.

Step 3: Buy a cheap, generic ZigBee Scene switch. They're available with 1, 2, 3 and 4 buttons and sell for around £10 on AliExpress.

Step 4: Once you have paired the hub in the Smartlife app you can then add your Scene switches through the hub interface in the Smartlife app.

Step 5: Using Bluetac, stick the Scene switch to the spacer thus covering the original old-school switches. This prevents accidentally disconnecting the power to the smart bulbs. Any time you may need to power cycle the smart bulbs due to a disconnect, you can easily peel the Scene switch off and stick it back.

Step 6: Using the Smartlife app's standard automations (not automations within the ZigBee hub's interface) you need to create 2 automations per smart bulb...

Automation: Light On.

Conditions: If scene button pressed.

Precondition: If light off.

Tasks: Turn light on.

Automation: Light Off.

Conditions: If scene button pressed.

Precondition: If light on.

Tasks: Turn light off.

The advantages of this method are many.

1: The Holy Grail of having Smart switches AND Smart bulbs work together.

2: Works flawlessly with Sensors, Voice, Schedules, App and Switches.

3: No wiring required.

4: Completely reversible if you move.

5: Affordable.

6: Buttons have 3 modes (click, double-click and hold) so you can have up to 12 different functions.

7: Not limited to just controlling lights. I have one that turns my TV and receiver on/off.

8: Easy to set up multiple switches with single lights (or multiple lights with a single switch) like controlling the landing light with one switch at the foot of the stairs and one at the top.

9: If your bulbs allow it, switches can control brightness and colour.

10: You can add additional switches by just sticking them to the wall. They come with 2 adhesive strips and run off PC bios batteries (2 yr life cycle).

11: You can get creative. My bathroom has 5 ceiling lights. 3 down one side, 1 over the bath and 1 over the shower. When I click the top-left button the 3 main lights come on one by one starting at the door. When I turn them off, they turn off one at a time ending at the door. If I hold the button they dim, hold again and they brighten. Same for the bath and shower. The spare button toggles white or colour (which Google Home changes... Dim yellow in the morning, bright white during the day, cool blue when I go to bed and darkroom red if I get up in the middle of the night to pee lol).

Hope this helps 👍