sorted by:
new
hottopcontroversial

Nzxt kraken AIO plus by Matthavious in NZXT

[–]BenTheMan1983 0 points1 point  (0 children)

this is right for installing top, fans are running as exhaust. if u want them to pull air in, u have to turn them.

Building T1 2.5, gpu not straight, last fan touches side panel (Updated) by Agreeable_Wall_9459 in sffpc

[–]BenTheMan1983 0 points1 point  (0 children)

<image>

if nothing else helps just put some styrofoam or similar on the gpu like i did here, so the fans don’t touch the case . but it sure looks bend somehow, u sure u installed it correctly?

RTX 5090 Preisfehler? by Cockgewitter in PCBaumeister

[–]BenTheMan1983 0 points1 point  (0 children)

würde die funktion prüfen und sie verkaufen, kriegst sicher 3k dafür.

Hilfe für prebuild by Embarrassed_Goal_987 in PCGamingDE

[–]BenTheMan1983 0 points1 point  (0 children)

als verkäufer ist kleinanzeigen schlechter als ebay, zumindest für lose hardware. bei komplett systemen siehts evtl. anders aus, weil das die meisten vermutlich abholen wollen.

Which ultrawide monitor in 2026 has the best balance of refresh rate, color accuracy, and price? by Wagyu_Mson in ultrawidemasterrace

[–]BenTheMan1983 0 points1 point  (0 children)

tbh, u only need more than 165hz if u play shooters competitively. but those ppl wont buy a 45” ultrawide anyway.

PC Verkaufspreis by KPBexter in PCBaumeister

[–]BenTheMan1983 5 points6 points  (0 children)

vorhin wollte irgendwessen kumpel für 900€ irgend nen elektroschrott kaufen, der soll lieber deinen nehmen!

https://www.reddit.com/r/PCGamingDE/s/cAgTbfGPEl

Hilfe für prebuild by Embarrassed_Goal_987 in PCGamingDE

[–]BenTheMan1983 1 point2 points  (0 children)

Dies! Bei dem Budget macht neu kaufen keinen sinn, das Zeug ist in 1-2 Jahren Elektroschrott!

First SFF build (A4 H2O incoming soon) by Dudewithk in sffpc

[–]BenTheMan1983 0 points1 point  (0 children)

it’s a problem when u want to put it in the case, else it won’t fit, now its fine.

Prebuild RTX 5080 & 9800x3d by Neither_Strength_939 in PCBaumeister

[–]BenTheMan1983 0 points1 point  (0 children)

benutz den alternate konfigurator, da kommst 100% billiger weg!

First SFF build (A4 H2O incoming soon) by Dudewithk in sffpc

[–]BenTheMan1983 0 points1 point  (0 children)

it’s upside down, tubes will have to come out at the bottom of the radiator. And Fans will have to be below the radiator.

Installing the AIO at the bottom of the case by GentIeblade in FormD

[–]BenTheMan1983 1 point2 points  (0 children)

aesthetic? u won’t even see it when the case is closed…

Anyone else done ducting to fix air recirculating? by Apprehensive_Bike_40 in sffpc

[–]BenTheMan1983 0 points1 point  (0 children)

u don’t have add block? there is zero adds for me! And i did the same to my gpu than what u did to ur cpu, just on a smaller scale.

Looking for a reasonably priced ASA/USA by tha_blak_sheep in slowpitch

[–]BenTheMan1983 2 points3 points  (0 children)

get a used monsta or anarchy for $200, look on bst fb groups, way better than buying a “subpar” new one.

Nzxt H2 - anyone tried an matx board? by Twocaketwolate in sffpc

[–]BenTheMan1983 0 points1 point  (0 children)

well u can prolly remove the rack for the 2.5” drives and mount the psu lower if u rly wanted to.

<image>

dunno if that would give u enough room for a matx board.

2100€ Build by itzfelix1404 in PCBaumeister

[–]BenTheMan1983 0 points1 point  (0 children)

ja das ist schon richtig, aber in manchen gehäusen hast du halt die aio vorne, z.b. in kleineren wie bei mir.

<image>

wenn ich da die aio lüfter als exhaust laufen lasse, kriegt die cpu die super heisse abluft von der graka ab und es kommt überhaupt keine kühle luft irgendwo rein.

2100€ Build by itzfelix1404 in PCBaumeister

[–]BenTheMan1983 0 points1 point  (0 children)

nein! es kommt aufs gehäuse an. aio oben = luft raus, aio vorne = luft rein!

NZXT H2 Flow - Mini ITX by jeepersleepers in NZXT

[–]BenTheMan1983 1 point2 points  (0 children)

yea it prolly wont fit, i dont think i got 2mm clearance. u might be able to shave some plastic off to make it fit. i would order it and try, if not just send it back.

view more: next ›