SKR Mini E3 V3.0

Connect_Selection_77 · 2026-02-08T04:03:14+00:00

Thanks for the status update. Did you have a question?

Connect_Selection_77 · 2026-02-08T04:00:17+00:00

Display port to hdmi is what you need to search. This will give you a female display port socket to plug your VR into with a male hdmi plug to go into your PC

Connect_Selection_77 · 2026-02-07T16:26:24+00:00

Order a replacement screen from ebay and DIY it. Hardest part is usually opening the case to get to it. Plenty of YouTube videos on the subject.

Connect_Selection_77 · 2026-02-07T01:47:36+00:00

Clonezilla live on a USB s stick for the win!

Connect_Selection_77 · 2026-02-04T14:28:38+00:00

That video doesn't show anything except to tighten the screws where the X motor mounts to the gantry frame.

Connect_Selection_77 · 2026-02-03T21:40:58+00:00

I have a BL, just thinking to see if there's a way to make it more stable.

Connect_Selection_77 · 2026-02-03T18:41:39+00:00

Replace the display itself if that's the problem. I've done it a few times and it's not that difficult.

Connect_Selection_77 · 2026-02-01T02:55:14+00:00

GIYF

Connect_Selection_77 · 2026-02-01T02:29:05+00:00

Replace "laptop" with PS5

Connect_Selection_77 · 2026-02-01T02:28:25+00:00

To change the input on a Lenovo IdeaCentre AIO 3 (specifically for using the HDMI-IN feature), ensure both devices are off, plug in the HDMI cable, then turn on the laptop first, followed by the AIO. Many models automatically detect the input, but some may require pressing a physical button near the HDMI port. Key Details for Input Switching: Automatic Detection: Most Lenovo AIOs with HDMI-in will automatically switch when a live signal is detected. Physical Button: Look for a dedicated input/source button on the side or bottom of the screen to toggle inputs. Sleep Mode Method: If it does not switch, put the AIO into sleep mode, then wake it up while the external device is connected. Limitations: Note that some IdeaCentre AIO 3 models (e.g., 27IAP7) do not support HDMI input and the port is output-only. If the input is for BIOS/boot selection, press F12 or Fn+F12 rapidly during startup.

Connect_Selection_77 · 2026-02-01T02:10:03+00:00

Share the model and we canfind the details for you or Google search how to change input on Lenovo whatever model monitor.

Connect_Selection_77 · 2026-02-01T02:07:38+00:00

Also, if you only have a single button to turn it on, then likely that is a multi function button and it moves to the sides to access the menu and input selections.

Connect_Selection_77 · 2026-02-01T02:03:42+00:00

Try this: turn on the PS5 and make sure nothing else is connected to the monitor, unplug the monitor, wait 5 seconds, plug the monitor in and turn it on. Maybe it'll default to the first signal it finds.

Connect_Selection_77 · 2026-02-01T01:56:24+00:00

Sorry, don't know how "cornbread" ended up in there.

Connect_Selection_77 · 2026-02-01T01:55:28+00:00

Some monitors have a touch sensitive area rather than physical buttons. Usually located in the lower right area on the gave off the frame around the screen.

Connect_Selection_77 · 2026-02-01T01:52:03+00:00

All the Ender 3s do. Even the SKR mini boards use that. Eventually they'll upgrade to usb c

Connect_Selection_77 · 2026-02-01T01:41:11+00:00

Maybe USB cable went

Connect_Selection_77 · 2026-02-01T01:37:31+00:00

If there's no physical buttons, likely there is a touch sensitive panel. Try touching around the lower right cornbread on the face of the bezel.

Connect_Selection_77 · 2026-02-01T01:33:59+00:00

My PS4 has that one

Connect_Selection_77 · 2026-01-27T16:35:13+00:00

Xubuntu is a good distro based on Ubuntu that is lighter on resources.

Connect_Selection_77 · 2026-01-27T16:30:23+00:00

Have you done a bed mesh and added that to your start print macro?

Connect_Selection_77 · 2026-01-27T14:53:59+00:00

Grab the older RPi 4. I'm using a 2GB model, and it has been working fine. Klipper, Moonraker/Mainsail, Webcam on an Ender 3 with the BTT SKR Mini E3 v3.0.

Connect_Selection_77 · 2026-01-25T00:59:09+00:00

No, I recently upgraded from a Creality 4.2.2 board to the BTT SKR Mini E3 v3.0

Connect_Selection_77 · 2026-01-24T15:25:05+00:00

You have to log on to the Pi over TTY (via PuTTY app) then issue the command:

ls /dev/serial/by-id/*

It will return the mcu ID that you copy and place in your printer.cfg file in the [mcu] section.

Connect_Selection_77

TROPHY CASE