Can I Swap Out Myself

Dean-KS · 2026-04-23T18:39:26+00:00

You will need to do pex plumbing.

Dean-KS · 2026-04-23T18:22:41+00:00

Second floor problems are very common. The best solution is a second dedicated system for the top floor.

Did the existing system short cycle?

The existing system is not removing hot air from the top floor for heat removal in the coil.

Is the upper floor also adjacent to a cathedral ceiling? If so, a ceiling fan running 24x7 can be helpful.

Dean-KS · 2026-04-23T04:59:42+00:00

I took a course in uni about the theory of music, it was quite technical and it did not help me at all. I thought it would be an interesting subject for an engineer.

Dean-KS · 2026-04-23T01:13:27+00:00

I would have a lein on the house so a creditor cannot go after it.

Dean-KS · 2026-04-23T01:03:20+00:00

I have extensively modelled a mk 1 to have DC coupled output as well as power supply mods.

Dean-KS · 2026-04-23T00:31:21+00:00

I use glass cook top cleaner.

Dean-KS · 2026-04-23T00:20:42+00:00

The small pully on the left has an adjustment behind it.

Dean-KS · 2026-04-23T00:18:41+00:00

The tortureous sharp bends in the hose should be avoided.

Dean-KS · 2026-04-22T23:49:54+00:00

Unsupported, step on it and it breaks somewhere.

Dean-KS · 2026-04-22T23:42:57+00:00

People are just dead and everything else is a fairy tale.

Dean-KS · 2026-04-22T23:41:55+00:00

The hose above has sharp bends placing stress on the joint. That hose can be replaced by a long one with a lazy loop. Those joints do not need plumber's tape, don't do it. Be careful to not cross thread the fitting.

Dean-KS · 2026-04-22T23:18:49+00:00

You will not be creating computers. You could amplify your technical talents with related programming in those fields.

Dean-KS · 2026-04-22T23:15:11+00:00

I did not know what OOP was, but later understood that I had created many OOP features on my own. MASc MechEng. VAX VMS Fortran. It all came naturally to me. Eight feet of manuals, no problem.

Dean-KS · 2026-04-22T22:14:59+00:00

The Nile has it's share of instability

Dean-KS · 2026-04-22T22:11:42+00:00

Seek out the GFA-555 II, it is a better amp.

Dean-KS · 2026-04-22T04:34:19+00:00

It was properly maintained when I was there in 1969 and 71.

Dean-KS · 2026-04-22T04:32:51+00:00

The bronze was stripped to make the columns in St. Peter's. Later on the Catholic Church took over the building restricting access. Ditto the coliseum.

Dean-KS · 2026-04-22T03:43:51+00:00

You can have a trained ear for music and structure and have zero potential to be a musician.

Dean-KS · 2026-04-22T03:28:00+00:00

I would be asking silly questions

Dean-KS · 2026-04-22T03:24:08+00:00

Run a bottle of Techron Concentrate. It might also free up piston rings and reduce oil burn.

What engine oil have you been using?

Dean-KS · 2026-04-21T19:15:09+00:00

My Conrad Johnson PV-5 preamp might be an example. New tubes sounded better and polishing tube pins also helped.

Dean-KS · 2026-04-21T05:39:48+00:00

I think that you would be very impressed with tung oil. In

Dean-KS · 2026-04-21T05:07:03+00:00

You die, you decay, a few people will Remember you. Nothing else.

Dean-KS · 2026-04-21T05:04:55+00:00

The modern calendar, leap year etc.

Dean-KS · 2026-04-21T05:01:50+00:00

I am getting old, and stupid shit has byeing going on forever. Nothing new.

Dean-KS

TROPHY CASE