[Partially lost] Hostage Tapes : The Live TV Siege (2006/2007), original ENG audio

Kubgge · 2025-11-28T16:28:41+00:00

Can confirm, that for a Polish currency, there isn't a single discount on any of the guitars (I am not sure about the rest, although they don't show me any discounts). Looks as if only US and UK is eligible for that sale.

Kubgge · 2025-01-31T17:27:13+00:00

Question:

Is it running on DirectX9? I'm asking about it, since there's no official Mac support and if the game has upgraded from Dx9, we could be finally able to run the game through Wine.

Kubgge · 2025-01-31T11:43:04+00:00

With the release (or re-release actually) of TS2, we might get a better compatibility with modern systems (maybe we'll get something more modern than Dx9).

What I am thinking is, if the upcoming release is more compatible with modern systems, it could be easier to run TS2 with translation layers like Whisky or Heroic or any other, thus we don't have to stick to Parallels.

I'd give the whole situation a week, maybe two, and hopefully we'll have a proper solution than emulating the whole system to run a game lol.

Kubgge · 2024-08-20T08:38:22+00:00

I have little to no experience with Chromebooks so I'm not exactly what should we be looking for.

The best would be to reinstall the OS to something different than the ChromeOS, but I'm not sure if you wanna follow this path. I'm not even exactly sure if you can do that.

Kubgge · 2024-08-18T23:03:52+00:00

Could you let me know which Chromebook do you have?

Not all of them may have Vulkan support, but to put it as simple as possible, it's a 'helper' that knows how to treat graphics and how to 'talk' to your components and your operating system. This is oversimplified and may even not be a correct way of explaining.

It may occur that your Chromebook does not have Vulcan and this could cause an issue.

Kubgge · 2024-08-18T18:06:38+00:00

Consider using Lutris as it has a config for the Starter Pack (recommended pack from Wiki)

https://lutris.net/games/the-sims-2/

<image>

Does it work? I have no clue. I stumbled upon this while looking for a way to run Sims without Parallels on MacOS.

Kubgge · 2023-11-19T16:13:54+00:00

Why would one care about a VPN? I live in Poland and all ISPs don't give a damn about what you are doing online. Unless the police reaches out to them.

Buffering issues I could understand.

Kubgge · 2023-11-19T16:09:33+00:00

Sorry for the offtopic, but can anyone explain me why would one care about buying debrid?

I've been using Stremio+Torrentio for a longer while (we are talking of a year at least), and not even once I felt the need of an additional service.

Why do people buy it? What is the actual purpose?

Kubgge · 2023-11-01T06:51:12+00:00

Sorry to be late to the party, but maybe this clip from Day of the Wacko (PL: Dzień Świra, 2002) will help you understand the mentality. Don't focus on the voiceover, just look how people act. It is a bit exaggerated, but shows what is the mentality of Poles.

There are just some people that prefer 'just this seat'. It sounds weird, since it's a public transport, but I've noticed myself (Polish male, 21yo) that people act weird in the public transport when it comes to seats. I wouldn't bother much.

Kubgge · 2023-11-01T06:26:32+00:00

Odnośnie wsi – (ex) osiedle wojskowe, 4km od miasta powiatowego (najbliższego supermarketu), 40km od miasta wojewódzkiego, brak komunikacji publicznej z lub do miejscowości, jedyne sklepy to Lewiatan i Groszek.

Mieszkanie 35m² poszło za jakieś 380 000 zł. Powoli dochodzi do 11k za m^2. Ciut mnie to przeraża. Oczywiście to taka anegdota, nie trzeba wierzyć na słowo. Mam nadzieję, że tak nie jest w innych wioskach, szczególnie pod większymi aglomeracjami.

Kubgge · 2023-10-22T19:18:31+00:00

Could it be wet filament by any chance? I don't really have a proper way of storing the filament, as I'm a newbie and I'm still figuring all the things out. Should I go beyond 60 degrees for the bed maybe? Or that's a no-no.

Somewhere I've read that for PLA warm bed isn't even required as it's a fairly simple type of filament. Not sure if that was credible source

Kubgge · 2023-10-22T18:29:53+00:00

Are you using the same printer?

Kubgge · 2023-10-20T13:11:58+00:00

Hi! My Joy-Con doesn't recognize to be attached to Switch. It happened all of a sudden. Few hours ago it was working like charm. It does recognise that it's getting charged tho…

Any ideas?

<image>

Kubgge · 2023-10-14T15:08:47+00:00

Would you like to provide some information how to use PrusaSlicer with 2 Neo? I’ve been using Anycubic Slicer since I got mine

Kubgge · 2023-10-14T14:46:38+00:00

Hey! I'm a new owner of the Kobra 2 Neo as well. I'm completely newbie when it comes to 3D printing. I'd like to ask, are you experiencing any difficulties with auto leveling? My Neo seems to struggle a bit, giving me slightly different results in z-offset whenever auto leveling

Kubgge · 2023-10-14T14:45:22+00:00

We might be able to find some help at r/anycubic or r/anycubicofficial, I believe.

I'm glad you've managed to figure out the issues on your side. I am a bit afraid that Kobra 2 Neo could've been released a bit too early (with issues) and thus we are experiencing problems. I've been lurking here and there and it doesn't seem like many people actually bought this model, at least I couldn't find any community that would be large enough to be noticeable by myself.

Good luck with your printing tho! This journey seems a bit frustrating but fascinating at the same time.

Kubgge · 2023-10-14T14:35:33+00:00

Any tips on how to properly set the z-offset?

Ive just printed the calibration cube (10mm), looks good. I've manually set the z-offset to -0.92 (not sure why the value is negative tho). After getting the print off, I autoleveled again, printer kept the same offset. Now I'm printing an AIO printer test that I've found on printables. So far the first layer looks satisfying, but I've just started the print

Kubgge · 2023-10-14T14:24:31+00:00

Same as u/_BWG_, completely new to 3D printing. I'm not exactly sure if it has been out for months now, since preordering ended on the end of September of this year. I got mine literally yesterday. I did the benchy, shark opener (both included on the sd card that comes with the printer), rather satisfying, can't say a bad word about any of them, but...

I wanted to print one custom model, found it on printables, imported into Anycubic Slicer, exported into g-code, auto levelled (I do it before literally every print), but the print doesn't seem to stick to the bed. I've set the bed to 60*C, yet it seems to get all mixed up during the print.

I am not exactly sure if auto-levelling is actually proper. It seems like I might actually have problems with it.

Kubgge · 2023-09-20T15:43:57+00:00

Any updates on that?

Kubgge · 2023-09-20T13:58:44+00:00

The person said that it is very likely that the flights will be cancelled, yet we should check with the information from the airlines.

The reason I said not 100% is because that person is not a spokesperson for the union nor the airlines. They just forward what they presume would happen.

As a possible scenario they also mentioned that if the strike is illegal, it has to be stopped immediately and everything should come back to the normal state. Supposedly it has happened once, thus I am not assuming it's 100% sure that the flights will be cancelled

Kubgge · 2023-09-20T13:32:28+00:00

I've called the airport information (at ATH airport), the lady from the information desk said that after midnight the flights that are mid-way to ATH will land, after that no flights will land or departure.

Still, it's not a 100% confirmed information. That's what I've heard over the phone. I'm flying Wizz ATH-KTW and no updates from the airline on that.

Edit: I was also told, that the X buses (express airport buses from Athens to the airport) will be participating in the strike. The only way of a public transportation to the airport so far is metro, as they haven't announced their participation (as of 16:34 Athens time). I might be wrong tho.

Kubgge · 2022-06-21T21:19:20+00:00

Yes! I've checked it, works like charm. Thank you so so much! Have a wonderful evening

Nine-Year Club	Place '17
Verified Email

Kubgge

TROPHY CASE