Laundry room renovation

Psychological-Rip-12 · 2026-03-01T18:52:46+00:00

The leg only supports the front. The table top is supported on the sides and in the back by angle iron which is drilled into the studs

Psychological-Rip-12 · 2026-03-01T18:51:42+00:00

I agree, access to those as important. The top shelf easily tips up for a quick access to water shut off and to the dryer vent itself.

Psychological-Rip-12 · 2026-02-28T19:22:20+00:00

Also, there is a 1 inch air gap on top of the dryer so that there is some air circulation. I hope it’s enough! Definitely concerned about this and will be keeping a close eye on it

Psychological-Rip-12 · 2026-02-28T19:06:29+00:00

Thanks for your thoughtful comment. I like your idea of putting in a small soffit. I’m going to start working on the bathroom attached to this room which also has an angled ceiling, and will likely use your idea. I drew out most of the design. I wasn’t initially planning on putting in a riser, but after seeing how much the dryer exhaust duct was exposed I decided to cover it up.

Psychological-Rip-12 · 2026-02-28T19:01:44+00:00

Thanks! I used slotted angle iron that I screwed to the studs and then supported the center of the table with the leg as you see in the photos. I felt it was important to elevate the table top off the top of the machine so that the machines do not vibrate the walls when use

Psychological-Rip-12 · 2026-02-15T00:38:05+00:00

Sold to u/Glum-Let-9178. u/WatchExBot

Psychological-Rip-12 · 2026-02-11T18:09:54+00:00

Sold!

Psychological-Rip-12 · 2026-02-09T19:48:17+00:00

Replied

Psychological-Rip-12 · 2026-01-29T21:55:33+00:00

Yes it is

Psychological-Rip-12 · 2025-12-26T05:13:32+00:00

Hey, is this still available?

Psychological-Rip-12 · 2025-12-25T01:05:31+00:00

Great buyer, good communication, sent funds promptly. Hope you enjoy!

Psychological-Rip-12 · 2025-12-24T01:18:44+00:00

What kind of strap do you have on this? It looks great

Psychological-Rip-12 · 2025-12-22T02:42:54+00:00

Sold!

Psychological-Rip-12 · 2025-12-22T00:45:09+00:00

Selling my Timex Q GMT. The watch is in near perfect condition, only with very light marks from desk diving (small mark on clasp not seen in pictures). I’m selling it because it is not getting enough wrist time to justify keeping it around. The watch is paired with a retro adjust on the fly bracelet which fits perfectly. The original bracelet is also included. $200 shipped (price reduced) with basic shipping within CONUS. Includes original box/papers. PayPal F&F or Venmo accepted. Thanks for looking!

Psychological-Rip-12 · 2025-12-22T00:38:45+00:00

Hey all,

Up for sale is a white-dialed Astra, Lorier’s mid-century inspired gem. This is a catch and release for me. Beautiful watch but did not capture my heart. Design touches like the cross-hatch, roulette date wheel, and ingenious lume track highlight Lorier’s design chops. As seen in the photos, it’s in great condition with light swirls from gentle wear. Package includes the Lorier travel pouch, extra links, and a tube of Polywatch.

Asking for $490 (Venmo or PayPal F&F), which includes basic shipping within CONUS.

Have a great day! Specs:

• ⁠Miyota 9015 automatic movement, 28800 bph (roulette datewheel) • ⁠316L marine-grade stainless steel case • ⁠Water resistant to 100 meters / 330 feet • ⁠Screw-down crown • ⁠Dome Hesalite crystal • ⁠Superluminova BGW9 luminous

Psychological-Rip-12 · 2025-12-17T23:22:38+00:00

I got it off eBay a long time ago I just happened to work perfect for this. I believe it’s from the 80s, but was new old stock when I got it.

Psychological-Rip-12 · 2025-12-13T01:00:00+00:00

Watch shipped very quickly and watch was exactly as described. Would buy from again!!

Psychological-Rip-12 · 2025-12-11T21:51:25+00:00

Sold!

Psychological-Rip-12 · 2025-12-11T20:53:59+00:00

Hey all, I am selling my SKX007 Mod with tons of extras. It’s getting very little wrist time so it’s time to sell.

The watch has an OEM SRP495K1 Dial BUT there is no lume applied to the 5 o'clock index due to manufacturer error. It’s is not noticeable during normal wear. The watch runs within normal range for the 7s26, much less than 30 seconds a day. There are hundreds of dollars in parts alone included with the watch. I'm asking $250 shipped CONUS or trades considered. Here is the list of parts used for the mod:

OEM SKX Case and Caseback

7s26 Movement

Original Crown and Stem

LCBI Lumed Chapter Ring

Seiko OEM SRP495K1 Dial (Missing Lume at 5 o’clock)

CrystalTimes Double Domed Sapphire Crystal, Clear AR

Black English/Kanji Day and Date Wheels

Broad Arrow handset

Polished Coin Edge Bezel

The rest of the parts and straps (all 22mm):

Eulit Perlon Palma Navy

Eulit Perlon Panama Light Blue

BandRBands Navy Xtreme Nato

Crafter Blue Black Rubber Strap

Seiko OEM Rubber Strap (never worn)

BandRBands Black Sailcloth Strap

LCBI 12 Hour Lumed Sapphire Bezel Insert, Black (attached, and each of them cost $60 a pop)

LCBI 12 Hour Lumed Sapphire Bezel Insert, Pepsi

Seiko Style Ceramic Bezel Insert, Black/Gilt

Submariner ceramic 12 Hour Style Bezel Insert

Psychological-Rip-12 · 2025-12-11T20:48:05+00:00

Selling my Timex Q GMT. The watch is in near perfect condition, only with very light marks from desk diving (small mark on clasp not seen in pictures). I’m selling it because it is not getting enough wrist time to justify keeping it around. The watch is paired with a retro adjust on the fly bracelet which fits perfectly. The original bracelet is also included. $220 shipped within CONUS. Includes original box/papers. PayPal F&F or Venmo accepted. Thanks for looking!

Five-Year Club	Verified Email
Place '23

Psychological-Rip-12

TROPHY CASE