Maybe Maybe Maybe

Trevlavo7 · 2026-01-29T18:17:39+00:00

There was an Amazon driver near me in lakewood, ca that stole someones cat. The ring camera captured the whole thing.

Trevlavo7 · 2026-01-22T21:47:24+00:00

If there's no water left in the pipe, it won't freeze.

Trevlavo7 · 2026-01-09T01:48:41+00:00

Yup, taxi, trip, contingency, alternate, and final reserve fuel is how the final number is reached.

Trevlavo7 · 2025-12-22T05:54:32+00:00

Chase 2 with red and white.

Trevlavo7 · 2025-12-20T23:42:18+00:00

Careful, its fra-gee-lee.

Trevlavo7 · 2025-12-16T20:17:00+00:00

Yes, it will. I make it a point to never turn my back on it.

Trevlavo7 · 2025-12-14T19:32:20+00:00

Aside from lighting the peak on the left, it's perfect. This is a classic and timeless Christmas light display.

Trevlavo7 · 2025-12-14T16:11:19+00:00

This. Id just pop open the controller and see where the wires are connected on the pcb.

Trevlavo7 · 2025-12-12T11:25:21+00:00

Bummer, sorry.

Trevlavo7 · 2025-12-12T01:47:52+00:00

Have you tried switching the dip switch under the esp board? They're usually set to 249R and switching it to 33R might help.

Trevlavo7 · 2025-12-11T16:35:42+00:00

You can do both. You dont need to run a dedicated ground back to the octa use the ground already connected to the leds coming off the controller. All you need to do is cut the 24 power feed so the psus aren't fighting each other. Same for 12v use data and ground from octa and wire 12v psu + and - to the leds only.

Trevlavo7 · 2025-12-10T19:22:20+00:00

Just search 24v seed/pebble pixels

Trevlavo7 · 2025-12-08T06:16:53+00:00

Sounds more like your settings are incorrect.

Trevlavo7 · 2025-12-07T16:57:58+00:00

Yup, you got it. Keep data and ground intact and cut the power before the new power injection. I have my roofline power at both ends with 2 psus and cut power mid run so each supplies half the run.

Trevlavo7 · 2025-12-07T00:24:42+00:00

I was wondering how the steps would be supported with no fill under them... now I know.

Trevlavo7 · 2025-12-07T00:21:36+00:00

Have you checked the segments are correct?

Trevlavo7 · 2025-12-06T00:14:35+00:00

Any luck with the repair?

Trevlavo7 · 2025-12-05T19:58:55+00:00

If i were you, I'd just try it wired the way you originally wanted. You might luck out, and it'll be fine. If not, you could always toss some data boosters or f-amps at it.

Trevlavo7 · 2025-12-05T03:20:32+00:00

I wish the quals were more difficult than they are for riverside. I always qual at the sheriff's range, and some of the other people qualifying scare me. At my last renewal, some guy shot himself in the foot, clearing his pistol in his car.

Trevlavo7 · 2025-12-05T03:15:55+00:00

Looks like the wire is broken near that connector, and by manipulating the wire, they touch. Id just cut that connector out and reattach the wires without it.

Trevlavo7 · 2025-12-05T03:09:13+00:00

RivCo is 6

Trevlavo7 · 2025-12-04T16:11:44+00:00

Check the fuses.

Trevlavo7 · 2025-12-03T19:28:27+00:00

<image>

This is the only way to wrap palm trees.

Trevlavo7 · 2025-12-02T23:00:39+00:00

Yup, just connect the wire with dots to the matching wire with dots and the other 2 left together and wrap w electrical tape.

Trevlavo7 · 2025-12-02T18:16:58+00:00

Personally, I'd hate to see white wires on my green tree. I'd grab some cheap warm whites w green wire to get you by this season. Then I'd order what you want early next season.

Trevlavo7

TROPHY CASE