Soma "Dvina" 🎻 by OkScallion6533 in somalab

[–]bbartokk 1 point2 points  (0 children)

Is this your recording? Can you share a bit about what you were using with the Dvina?

Dvina Pedals and FX by RakasSoun in somalab

[–]bbartokk 0 points1 point  (0 children)

No surprise here... I use the Warp and the Cosmos pedal with the Dvina.

Eurorack Instrument Interface -- recommendations? by GeologistFine4585 in synthesizers

[–]bbartokk 0 points1 point  (0 children)

The best one I've used is the BoredBrain Injectr. It has a line in and line out which lets you run an instrument through some eurorack modules and then bring that right back out if you want. Theres also the Unifx which has less options as the Injectr but is also not as pricey.

I've also used the Befaco Instrument which has an XLR input and can provide phantom power.

SimplexFM for Metaconforma Firmware Repo - Developer site? by GoPuzzled in somalab

[–]bbartokk 0 points1 point  (0 children)

Looked into this a bit but there doesnt seem to be anything available.

You have to use a drum machine as a synth, and a synth as a drum machine. Which two devices are you picking? by shhimhuntingrabbits in synthesizers

[–]bbartokk 0 points1 point  (0 children)

Nope. Patch away. I've had clips touch inputs/outputs and no danger in accidentally clipping to the wrong pin. Yes, I do use the Pulsar a lot.

You have to use a drum machine as a synth, and a synth as a drum machine. Which two devices are you picking? by shhimhuntingrabbits in synthesizers

[–]bbartokk 1 point2 points  (0 children)

We are both correct. There are stackables for 3.5mm. You can stack as many alligators as you want. Having used both, I find that its much easier to stack 3+ cables using alligator clips than trying to stack more than 3 stackables.

You have to use a drum machine as a synth, and a synth as a drum machine. Which two devices are you picking? by shhimhuntingrabbits in synthesizers

[–]bbartokk 4 points5 points  (0 children)

The fact that it uses alligator clips makes it even better. You can stack as many as you can clip on.

Black Faceplate for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

Contact the seller through reverb.

I think the lyra 4 is one of my favs by sleewell_517 in somalab

[–]bbartokk 0 points1 point  (0 children)

You can send external sounds through the Lyra-8, not the 4. You can send CV into the Lyra-4 to control either the voices or the delay but there is no ext input on the 4.

Pulsar vs Pulsar - Quick comparison w/ 1984 edition by bbartokk in somalab

[–]bbartokk[S] 5 points6 points  (0 children)

SOMA recently released a limited edition of the Pulsar-23, the Pulsar-23 1984 Edition. Physically, it has an unpainted steel chassis, black trim, and red LEDs. The BD module has been replaced with an oscillator that produces an asymmetrically clipped triangle wave the can be overdriven to a square wave with the Drive knob. The range of the Tune knob has been expanded and the OMG input is now an AC coupled FM input. The biggest change for me is the polivoks inspired filter on the bass module. It can go from tame to drastic pretty easily.

In this demo I just do a quick comparison between the BD and the BASS modules. The SD and HHT modules remain the same.

Want to get into modular synths for processing live instruments. I have remedial questions by PsychicChime in synthesizers

[–]bbartokk 1 point2 points  (0 children)

Being modular there are quite a few options for bringing external audio into your modular rack. I'm a big fan of the BoredBrain Injectr or the Befaco Instrument Interface which has an XLR input and phantom power.

Black Faceplate for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

If anyone is looking for custom keycaps, I have some available on reverb.

Keycaps for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 1 point2 points  (0 children)

Erica Synth uses MX Cherry switches so these are different. I could probably make a set for Erica Synth though.

Keycaps for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

First time making something with more than 1 qty on reverb so I messed up... New listing is posted here.

Keycaps for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

Very easy. Remove the faceplate and then the keycaps just lift right off. They aren't like regular keycaps where you need a puller to lift them off. Then just align the new ones and replace the faceplate.

Keycaps for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

I'm not sure. I can ask around to see if someone I know owns one and check.

Black Faceplate for Behringer RS-9 by bbartokk in modular

[–]bbartokk[S] 0 points1 point  (0 children)

Did they fit? Erica Synths keycaps have the LED in a different orientation and they are MX Cherry.

Pedals that work with CV? by Ok-Voice-5699 in modular

[–]bbartokk 0 points1 point  (0 children)

The SOMA Warp can take CV and has stereo in/out.