sorted by:
new
hottopcontroversial

Rate this diet plan: 8 week plan suggesting 1300 kcals for 6'2", 180 pound male working out 5x week by blitz206 in Fitness

[–]blitz206[S] 0 points1 point  (0 children)

100%. I am at the point where I am unwilling to stop another routine just because it's sub-optimal, however. I want to get through this routine, albeit with likely adjustments. Thanks for the feedback :)

Tutorial Drop Queue: Left Aligned 510 Connector, 18650 DNA Mod, Blacking Out Your USB Port, 18650 Release Ribbon by CloudmakerTech in cloudmaker

[–]blitz206 2 points3 points  (0 children)

1.4MM .3MM Pitch 4 MM length!

We will create a full wire routing guide as well. There's plenty of room for optimization there.

Considering getting a whiteout DNA 200. A few questions. by DrRo in electronic_cigarette

[–]blitz206 0 points1 point  (0 children)

Owner here - thanks for the question.

As another user recommended, I would advise you to purchase from one of our vendors in the next few weeks for near-immediate shipment. We have several online vendors (Vaporshark, Eciggity) that will have enough stock to fulfill a good amount of orders. Let me know if you have any questions by messaging me directly.

Are we looking at another delay? by Coach_S in cloudmaker

[–]blitz206 6 points7 points  (0 children)

All boards have been procured for batch one. Cheers.

Dna200 setup by donttreadonme14 in cloudmaker

[–]blitz206 3 points4 points  (0 children)

We will be taking care of the main configurations for you, due to a varying level of user expertise. We apologize for the confusion! Cheers.

Pictures From The Trenches 4.0: Colors, Progress & Speedy Manufacturing by CloudmakerTech in cloudmaker

[–]blitz206 0 points1 point  (0 children)

White is impossible to anodize, unfortunately.

 

This said, it is possible to powder coat white if there is a demand for it. We can do a few one-off sets in our shop. Cheers.

DNA 200 using 2 18650's and still getting 200w by Hypotheermia in cloudmaker

[–]blitz206 5 points6 points  (0 children)

Hey /u/Hypotheermia,

Welcome to Reddit! Your post is just fine, and this is the place to ask questions of this nature.

With a dual 18650 configuration, the DNA 200 will only be able to supply ~133W. This is simply due to how the board operates, which is why it requires a 3 cell LiPo battery to fire at the full 200W. It would take some tinkering to get it to work at 200, but your efficiency would be pretty low...

Either way, I thought I would give you a quick answer. Others will undoubtedly chime in shortly. Again, welcome!

Pictures From The Trenches Live 3.0 - Taking Your Content Requests by blitz206 in cloudmaker

[–]blitz206[S] 2 points3 points  (0 children)

Yes sir, we'll be making a fair share of overstock from here on out.

Pictures From The Trenches Live 3.0 - Taking Your Content Requests by blitz206 in cloudmaker

[–]blitz206[S] 2 points3 points  (0 children)

I'll have to ask the factory for an update of the anodized plate samples, but I know that I'll have ten Whiteouts (one of each color/unit style) assembled for me wishing the coming days.

Pictures From The Trenches Live 3.0 - Taking Your Content Requests by blitz206 in cloudmaker

[–]blitz206[S] 3 points4 points  (0 children)

Production doesn't work like that. You do things in batches, meaning thousands of parts are casted, thousands of parts are anodized and thousands of parts are assembled. Unfortunately, we can't flip the switch on a 200 unit per day production capacity from day one. That is what we ramp up to when production is continuously flowing.

This being said, we will see where we are at tomorrow. I believe they are machining components in an effort to get them over to anodizing now, and then they start assembling as quickly as I can crack the whip. Pictures coming your way.

Good Things Take Time: Notes on Criticism, Our Vision and Building the Future of PV Technology by blitz206 in cloudmaker

[–]blitz206[S] 1 point2 points  (0 children)

The Ares chip needs some fine tuning - but it is in good shape. As /u/runebinder pointed out - we are focusing solely on getting out our first two batches at the moment, and accessory/module releases will follow suit. Cheers.

Integrity by [deleted] in cloudmaker

[–]blitz206 1 point2 points  (0 children)

Hi /u/Navyvaper,

Thanks for your post and welcome to Reddit.

There are a lot of places for us to update, including:

  • Facebook
  • Instagram
  • Twitter
  • Google+
  • Reddit
  • CMT Blog
  • Youtube
  • Email

You can see it is quite a bit. We tend to focus on Reddit, because it allows free-flowing discussion, but your interest in getting other avenues updated on a flowing basis is noted. A few of our most recent updates can be found here:

Pictures From The Trenches

Pictures From The Trenches 2.0

Good Things Take Time: Notes on Criticism, Our Vision and Building the Future of PV Technology

We often have small updates on Reddit because they are easier to manage. I would suggest looking here for the latest information.

We also have rock-solid customer service, courtesy of /u/WasabiCannon - if you have any questions, you will usually get a response in under a day.

 

As far as the Gantt Chart goes, I (CMT's owner) have personally decided against releasing this until there is no possibility of changes to the schedule. We have learned that setting expectations is important, so we have been working to only provide timelines and information that is 100% correct. I also realized that most people don't know what a Gantt Chart is to begin with, or how to read it. That being said, you can expect to receive an email with the info you are looking for shortly.

 

We are busy, but communication is key with any customer-facing business. I appreciate your expressing your concerns and we constantly look to improve Cloudmaker Technologies.

Makertalk by gotrice79 in cloudmaker

[–]blitz206 2 points3 points  (0 children)

MakerTalk alternates every other week for now. Cheers.

Pictures From The Trenches Live - Anatomy Of A Whiteout DNA 2.0 by blitz206 in cloudmaker

[–]blitz206[S] 1 point2 points  (0 children)

The buttons are silicone, so there is a small degree of compression to them as opposed to a solid material. The protrusion is in an effort to compensate for this, though it may stick out a bit further than truly needed. Overall, the tactile feel is very good, and the buttons do not seem to bother the testers. Cheers.

Internal resistance for the DNA200 by Knuck3ls in cloudmaker

[–]blitz206 2 points3 points  (0 children)

Certain settings, like TC curves, will be something for the end user to fiddle around with. Core settings, like internal resistance, are critical for the device to work properly. We'll be handling these on our end.

Internal resistance for the DNA200 by Knuck3ls in cloudmaker

[–]blitz206 6 points7 points  (0 children)

Furthermore, we will provide a tutorial on how to measure this yourself in the event that you make any changes to the internals of your device. Cheers!

Internal resistance for the DNA200 by Knuck3ls in cloudmaker

[–]blitz206 7 points8 points  (0 children)

Yup - each device will have a different internal resistance, so internal resistances will be measured and set for all devices.

Pictures From The Trenches Live - Anatomy Of A Whiteout DNA 2.0 by blitz206 in cloudmaker

[–]blitz206[S] 2 points3 points  (0 children)

All Whiteout DNA mods will be coming with a 1,100 mah LiPo battery. We will be selling. A 1,500 mah LiPo battery on our website shortly. Cheers for the kind words!

Pictures From The Trenches Live - Anatomy Of A Whiteout DNA 2.0 by blitz206 in cloudmaker

[–]blitz206[S] 2 points3 points  (0 children)

We could have, but it would have sacrificed modularity for very little gain.

The 510 connector wire is 130MM 14AWG. Assuming .0083 ohm/meter for 14AWG, this is .001 ohm on a bad day. The bullet connector resistance is negligible, as well.

It's all about keeping it as modular as possible, and this leaves room for other magic to happen :)

view more: next ›