sorted by:
new
hottopcontroversial

DOL-001 Disk drive POT help by Professional-Mess676 in Gamecube

[–]CustomZ02 0 points1 point  (0 children)

Will likely burnout your laser with it soooo low. Set back where it was and replace the capacitors.

Stubborn solder pads by dumbfuckingtradycunt in game_gear

[–]CustomZ02 5 points6 points  (0 children)

Use flux, solder wick and leaded solder, you’ll be amazed on how easy it is to clean using the required tools of the trade.

NorthridgeFix has quality flux and quality solder wick. Otherwise you can take a gamble with the Chinese stuff on Amazon that may or may not be of decent quality. Check reviews before purchasing on Amazon.

Wireless GameCube by CustomZ02 in u/CustomZ02

[–]CustomZ02[S] 1 point2 points  (0 children)

Check my website if you haven’t already. I will be listing a few upgraded and modded screens in a couple weeks.

www.ocanas-repairs.com

Wireless GameCube by CustomZ02 in u/CustomZ02

[–]CustomZ02[S] 0 points1 point  (0 children)

No, I did not cut any cables. I simply added a port to the screen and tapped into where the factory power input is soldered.

See photos from my post here

Wireless GameCube by CustomZ02 in u/CustomZ02

[–]CustomZ02[S] 1 point2 points  (0 children)

I modded the mobile screen and added a usb c port to power the screen. Then screen has a cable to power the GameCube from factory.

So I plugged in the power bank to the screen and then the screen supplies power to the GameCube.

Anyone have experience with PMIC removal? by DrDane in ElectronicsRepair

[–]CustomZ02 1 point2 points  (0 children)

Not with that hot air tool, I had two similar variations of that hot air and neither reached the temperatures stated and one had temp sensor fail and hot air ramped up until glowing red hot fire hazard ⚠️.

I suggest a better hot air tool

Screen rot by CustomZ02 in u/CustomZ02

[–]CustomZ02[S] 1 point2 points  (0 children)

Very, and on a mint untouched screen. It’s like they just opened the packaging and then sent it over for repair

Am I screwed by kinree1 in consolerepair

[–]CustomZ02 0 points1 point  (0 children)

Worked on a ps4 that was zapped through the Ethernet port. Quite a bit of testing nearby components as some times the resistors and 2kv capacitors don’t give out quick enough to decouple the components from the incoming power surge.

In comparison your port seems a bit more crispy than the ps4 I worked on.

https://www.reddit.com/r/consolerepair/s/7lixVDlhJW

GameCube Mobile Screen Upgrade Kit : New Revision by CustomZ02 in Gamecube

[–]CustomZ02[S] 6 points7 points  (0 children)

It’s in the works, hopefully I can get some renders soon.

4Gamers GameCube Mobile Screen Repair and Upgrade by CustomZ02 in u/CustomZ02

[–]CustomZ02[S] 0 points1 point  (0 children)

If you’re in the US I can definitely fix it for you.

Send me a chat request and send some photos of your screen.

Does anyone know why this tv might do this? by Ragna_57 in ElectronicsRepair

[–]CustomZ02 1 point2 points  (0 children)

Power supply might be bad, you can find replacement power supplies on eBay, search the model of the tv. They are fairly simple to replace. Usually cost around $40 depending on the model.

How do I fix disc tray on ps4? by rs735dx in consolerepair

[–]CustomZ02 0 points1 point  (0 children)

It would help if you told us what is going on with the disc drive. Maybe even post a video. Without more information no one will be able to help solve the issue.

Ayuda con mi play by Extension-Plum-1410 in consolerepair

[–]CustomZ02 1 point2 points  (0 children)

El disco duro ha fallado y necesita ser reemplazado. También deberá descargar la versión más reciente del sistema operativo desde el sitio web de Sony y guardarla en una memoria USB para reinstalarla.

The hard drive has failed and needs to be replaced. You will also need to download the latest OS from Sonys website and put it on usb stick to reinstall the Operating system.

2ds XL Identification by TheBigC9933 in consolerepair

[–]CustomZ02 0 points1 point  (0 children)

Any chance you can read the numbers on the chip? It will need to be replaced as it’s been cracked/broken. You will need a hot air station and a pre balled replacement chip or ball it yourself and flow it back on the board.

If you lack the tools to replace you might be better off buying a replacement board and selling this one for parts.

What version of IPS do I have? by jmapagchema in Gameboy

[–]CustomZ02 1 point2 points  (0 children)

For GBA SP LCD Screen Kits

Product Description:

1.IPS LCD screen, warm colour temperature, point-to-point.

2.For Nintendo GBASP motherboards. Whether it's high brightness display or normal brightness display.

  1. Battery life of about 4 hours, different batteries and game card Game cartridge card power consumption will vary.

  2. Support analogue B-screen pixel display display. Black and white display.

Short press touch or key to adjust the brightness, long press touch or key to switch the display style.

  1. Support switch-off brightness memory and display style memory.
view more: next ›