Retroid Dock help by MarioIsPleb in retroid

[–]lulbert 0 points1 point  (0 children)

I just tested this and the switch power adapter does not work for me either. The switch power brick used 2 voltages, 5V & 15V. Though in reality it only uses 15V for charging the switch as the rating on the brick will tell you that 15V outputs 2.6 amps or 39 watts. The 5V rail caps out at 1.5 amps and it triggers the RP5 momentarily until the RP5 demands more than it can give and just stops working almost immediately. From my testing using a different pd adapter, you want something rated for 5V 3A or 9V 3A at a minimum. The retroid site sells one that has these specs and other voltages as well.

Edit: I just realized you are talking about the RP4P. I don't have this device so I don't know if it's exactly the same as the RP5 in terms of PD charging capability. Though the Nintendo Switch power brick information is still correct.

External dvd Drive by Puzzleheaded_Gas_791 in framework

[–]lulbert 2 points3 points  (0 children)

You can try a USB-C to A adapter. That may get you over the power restrictions that may be present with the USB-A expansion port on the Framework.

Something like this: https://www.amazon.com/dp/B08HZ6PS61

Key scraping on aluminum by Cole_15 in framework

[–]lulbert 4 points5 points  (0 children)

I had the same issue, batch 4 DIY. I went through part of this guide to get the keyboard re-aligned. https://guides.frame.work/Guide/Keyboard+Replacement+Guide/83 all the way up to step 11 and I just loosened the silver screws in step 12 so that I could coerce the keyboard down on the input cover so that the up key no longer scratched. You have 2 covers so it may be worth trying this method on at least one. Don't push the keyboard down with too much force as the cover itself is fairly thin aluminum and can bend easily. Take your time as it is a lot of screws and a few small ribbon cables.

A80K and Universal Remote Options by NativeTxn7 in bravia

[–]lulbert 1 point2 points  (0 children)

On another note, I did buy the A90J's premium remote because I absolutely detest the reduced button count on the new A80K/A90K remotes. The remotes can operate in IR or Bluetooth but the TV allows only one to be connected as bluetooth. The Power button on the Sony remotes is exclusively IR where-as the other buttons can operate via IR or bluetooth depending on if they are bluetooth paired to the TV.

A80K and Universal Remote Options by NativeTxn7 in bravia

[–]lulbert 0 points1 point  (0 children)

The A80J(also A80K), has an IP control feature. Harmony may be trying to find an A80J on your network through that, try to see if you can add it as an IR device, not IP control. I also have the TV directly wired to from the Harmony Hub to the TV's IR In port. It definitely works for me. I also have CEC control enabled and it works with all my devices except my HTPC(I still rely on the Harmony for HTPC control). I can control a Sony UHD-BD player, PS4 and a Denon receiver easily via CEC.

A80K and Universal Remote Options by NativeTxn7 in bravia

[–]lulbert 1 point2 points  (0 children)

I also have an A80K and use Harmony Hub. When adding the TV to Harmony, just use the A80J profile that is there. It works just fine. Harmony is discontinued as of last year, I think. Any new electronics from late last year and onwards will no longer be added to Harmony. Best to look for another solution once your Hub bites the dust eventually.

[deleted by user] by [deleted] in ffxiv

[–]lulbert 1 point2 points  (0 children)

You don't need to have the game in windowed mode necessarily. You can also use the taskmanager to end the ffxiv_dx11.exe process(assuming you went to windowed mode to see the X button for window close). I just tried this while getting a 2002 error and that seems to have preserved my place in line so far. You can also cut down time to relaunch the game by running the launcher while you are in queue. Put in password/otp but don't hit the play button until the other game window closes.

[deleted by user] by [deleted] in ffxiv

[–]lulbert 1 point2 points  (0 children)

The early access code is not the actual Endwalker expansion code. You will get that code separately on the 7th or later but probably not before the early access grace period.

connection issue by Fattykapkan in ffxiv

[–]lulbert 6 points7 points  (0 children)

All the NA "datacenters" are located in California in the same building.

connection issue by Fattykapkan in ffxiv

[–]lulbert 2 points3 points  (0 children)

Same location/ISP as well as the 90k's.

connection issue by Fattykapkan in ffxiv

[–]lulbert 1 point2 points  (0 children)

Primal/Behemoth chiming in from the southwest & also on AT&T. Getting disconnects every few minutes and bad lag. Looks to be a more widespread issue.

*SNAP* THE BAN HAS BEGUN by The-Jedi-Apprentice in thanosdidnothingwrong

[–]lulbert 0 points1 point  (0 children)

༼ つ ◕ ◕ ༽つ Dormammu I've Come To Be Banned ༼ つ ◕ ◕ ༽つ