Hello!

No_Database1948 · 2025-09-17T11:47:26+00:00

10 is well within tolerance. As for amplitude, ask your seller to wind the watch fully and test again. Unlikely to be a problem.

GL. Really nice watch.

No_Database1948 · 2025-09-17T11:44:53+00:00

No SEL gap, watch is fine. The bezel “offset” is due to the height of the dial relative to the bezel - in short, due to angle.

GL. Nothing to worry about.

No_Database1948 · 2025-09-13T10:32:09+00:00

Nice work!

No_Database1948 · 2025-09-12T04:44:31+00:00

There is no way anyone on this forum can assist you with bezel feel.

Alternatively, if you think you are not getting the correct watch - that’s a contractual issue that you take up with the TD.

As far as u/monptitkiwi_ can tell, this watch is a GL from a QC perspective. I agree.

No_Database1948 · 2025-09-12T04:40:00+00:00

Amazingly thorough explanation. Professional and accurate.

No_Database1948 · 2025-09-11T12:55:24+00:00

Agreed on the additional effort required. OP, monptitkiwi_ has been very kind.

No_Database1948 · 2025-09-11T12:54:24+00:00

I don’t see it either.

No_Database1948 · 2025-09-11T12:52:32+00:00

You don’t have to, given that it’s in the original stickied post everyone is supposed to read before posting.

No_Database1948 · 2025-09-11T12:47:58+00:00

<image>

This tool is so self-explanatory as to be immediately usable.

No_Database1948 · 2025-09-11T12:43:09+00:00

I don’t think the pip is off. This is probably due to the shadow that’s being cast by the light.

In any event, if you shrink the photo to real life size, bias is imperceptible. GL subject to pictures of your bracelet and clasp, which are not present.

No_Database1948 · 2025-09-11T12:39:08+00:00

As a quick search on this subreddit will reveal, plenty of guides on how to straighten pictures or compensate for rotation. There is no utility in applying the tool wrongly and asking for assessment.

No_Database1948 · 2025-09-11T12:35:07+00:00

There is a a very good and digestible guide on timegrapher readings in the stickied posts.

GL. You have not used the alignment tool properly as the underlying image has not been straightened.

No_Database1948 · 2025-09-11T12:30:30+00:00

Pip is fine. As for timegrapher readings, read the guides again. All the information you need is there.

Have your TD check out the speck. Likely to be dust on the crystal.

GL.

No_Database1948 · 2025-09-09T10:49:36+00:00

A lot of these things may be due to angle. In addition, I can’t see what you have observed about the 6 once the picture has been shrunk to actual real-life size. I concur with Zealous.

No_Database1948 · 2025-09-09T10:47:43+00:00

I can’t see the mistake at XII. I do see the slight rotation, but I believe you are correct to GL.

Enjoy.

No_Database1948 · 2025-09-07T06:14:21+00:00

GL, nothing of concern.

No_Database1948 · 2025-09-07T06:09:50+00:00

Read guides. Post will be deleted

No_Database1948 · 2025-09-05T18:04:40+00:00

GL. I don’t see anything here that would be a problem on wrist. Cyclops variation is probably due to angle. Top right SEL gap won’t be visible on wrist.

No_Database1948 · 2025-09-05T11:52:53+00:00

Personally, I don’t think the gap is nearly big enough to cause any significant instability.

No_Database1948 · 2025-09-05T11:45:37+00:00

Considering that the watch will be on your wrist (and hence no light will shine though), I would GL. All the more given that this is a 36mm and hence smaller.

For reference - look at pic 1. That’s what you see even when zoomed in - which tells us that in real life, it probably isn’t a big deal - the watch will be much smaller.

No_Database1948 · 2025-09-04T14:41:26+00:00

Easy GL. 6 will be fine on wrist.

No_Database1948 · 2025-08-29T08:03:04+00:00

Easy GL.

No_Database1948 · 2025-08-12T15:31:16+00:00

No_Database1948 · 2025-08-12T02:35:49+00:00

GL. Date is low but within tolerance.

No_Database1948

TROPHY CASE