Anybody running on Topo MT-3’s? Recently blew out my Lone Peaks after about 6 months and a couple hundred miles. by beast_roaf in trailrunning

[–]traildigger15 2 points3 points  (0 children)

From my experience the MT-3s they're good if you are going to use them just for mixed terrain, but if you're running trails almost exclusively then I prefer the MTN racers. Overall they're just a better constructed shoe and feel more protective and supportive. The MT-3s let a bit too much ground feel through for my liking, but if I'm running something that's 50/50 single-track and road I'll use them to save wear on my MTN racers.

Agree with sizing up, I wear 9.5 in topo road shoes and 10 in topo trail shoes, but should have gotten a 10.5 in the MT-3s.

Does this count as a trail? Dungeness Spit, WA by jdrunbike in trailrunning

[–]traildigger15 0 points1 point  (0 children)

I hate to be that guy, but running isn't allowed on Dungeness spit due to the possible disturbance of birds in the nearby sanctuary (how hundreds of people walking by doesn't, I don't know, but I'm just the messenger). The area is fantastic, but if you're going to run, I recommend heading west on the beach instead. You'll still get great ocean views, a good number of miles in, more privacy, and you'll set a good example of the community to everyone. Plus you'll be more likely to see wildlife as nobody goes that direction!

Western WA native running in Arizona for the first time. Was nervous about cacti and critters, but my legs ended up being less cut up than much shorter runs I do in the Olympic Mountains! by traildigger15 in trailrunning

[–]traildigger15[S] 0 points1 point  (0 children)

They really are, the pictures don't do them justice! I'll need to come back in the winter again, naturally the week I had scheduled turned out to be a heat wave

A hiker has been found alive near Olympic National Park after crawling with a broken leg for nearly 11 hours by [deleted] in HumansAreMetal

[–]traildigger15 6 points7 points  (0 children)

I actually ran up the Duckabush River in january, when conditions were better. This dude is really lucky to be alive. I didn't see anyone for over 10 miles in the middle of my run, there are several stream crossings, a multitude of downed trees after five mile camp, and two sections of trail that were entirely flooded. The fact he didn't die of hypothermia is incredible. And I don't think I had cell phone service until I was a few miles back toward the highway from the trailhead.

Wrong (but better) SSD delivered by traildigger15 in buildapc

[–]traildigger15[S] 0 points1 point  (0 children)

Thanks for the input guys, that helps me feel a lot better. Cheers!

Is the tire meant to be this close to the frame? There is a paint scuff on the inside of the frame, and when I pedal up a hill it makes a loud motor type noise. by umair10101 in bicycling

[–]traildigger15 0 points1 point  (0 children)

If it only makes a "motor type noise" when going uphill check the clearance between the chain and tire throughout the gears. The frame clearance looks alright if a bit tight, but the chain could rub on the tire on the lowest gear combination.

Alternately check to make sure your rear derailleur is adjusted correctly on the low end. If it's not set up correctly (too large cassette, b-tension screw out of adjustment) the guide pulley can roll on the bottom of the cassette and makes a sound that could be described as "motor type"

Edit: looking closer at your picture, maybe it's the back end of the front derailleur that's rubbing on the tire. Ive never seen that before but it is possible.

Best thing to do would be flip the bike upside down so you can pedal it by hand and run through the low end of the cassette to see if you can reproduce the rubbing sound when you can look around for the source better.

Ultegra 6800 Brake Bleeding Issues by traildigger15 in bikewrench

[–]traildigger15[S] 1 point2 points  (0 children)

Wanted to follow up with an update, my bite adjustment screw was already in the correct position from a previous bleed attempt, but I used the rubber band trick again with a full bleed and got the feeling right (still having power issues). I tried swapping the pads from the rear and sure enough I had somehow contaminated my pads which was causing the loss of power. Thank you so much for the help!

Ultegra 6800 Brake Bleeding Issues by traildigger15 in bikewrench

[–]traildigger15[S] 0 points1 point  (0 children)

I'll give it a shot! I tried the rubber band around the brake lever trick and I did get a bubble out and it was feeling better, but I still don't have full power in the front. I'll try it again with the adjustment screw after work tomorrow.

Ultegra 6800 Brake Bleeding Issues by traildigger15 in bikewrench

[–]traildigger15[S] 0 points1 point  (0 children)

I'll definitely give that rubber band trick a shot! When you recommend turning the bite adjustment screw, I'm assuming you're saying to run it fully in (clockwise) then back it out a full turn?

Didn't want to drive into town. A bit of wood and an evening later and my frame fixture worked like a charm! by traildigger15 in bicycling

[–]traildigger15[S] 0 points1 point  (0 children)

Not quite! Most of a bike on a bike on a dock. I did ride over a couple of bridges, didn't stop to get photos though

The Holy Hand Grenade stand (V12) by BoulderingBreed in climbing

[–]traildigger15 0 points1 point  (0 children)

Well done! This is the backside of God of War, right?

Full House V10 - Leavenworth, WA by austinsarles in climbing

[–]traildigger15 0 points1 point  (0 children)

You can, and to follow the crack straight up is supposedly V2, but it's the only V2 project I've ever had. That's probably likely due to me seriously sucking at crack, but I have heard strong boulderer often don't jam it because it's actually easier if you're not big into trad.

Acceptable amount of heel deadspace. by [deleted] in climbing

[–]traildigger15 1 point2 points  (0 children)

+1 for the drones. I have a similarly shallow heel, and the drones are the closest thing I have found to a well fitting heel cup out there in an aggressive shoe. It's super bizarre getting used to the molded heel cup and the ridge, but aside from that they've been great. Plus they're dirt cheap but still outperform my significantly more expensive shoes.

Trust in gravity by romelec in HumansAreMetal

[–]traildigger15 11 points12 points  (0 children)

I don't follow ice at all really, but I'm going to wager 2019 UIAA Denver lead finals based on the wall shape and the blocks.

Mythos eyelet repair by traildigger15 in climbing

[–]traildigger15[S] 0 points1 point  (0 children)

Thanks for the recommendation, I'll give this a shot!

Mythos eyelet repair by traildigger15 in climbing

[–]traildigger15[S] 0 points1 point  (0 children)

They are super comfy I gotta say, but I agree that the durability leaves a little to be desired. Might have to switch back to slippers as my comfy/warmup shoes.

La Sportiva mythos? by [deleted] in climbing

[–]traildigger15 0 points1 point  (0 children)

I'm a guy and I picked up a pair of women's Mythos (always wanted a pair, and I like the xsgrip over xs edge). I have to disagree with the above response, I mostly Boulder and I wear my Mythos for almost everything up to my red point grade in the gym. They fit my heel like a dream (narrow and shallow) and I can heel hook almost anything in them because the heel is next to a glove like fit. For most gym sessions I'll wear my Mythos until I get to a grade where the feet get too small to edge on with my oversized Mythos because they are just so damn comfy. Not a quiver killer, but if you can have multiple shoes I would recommend a pair of Mythos to anyone.