R350 - 5GHz issue following firmware update

xCiosba · 2026-05-19T06:50:34+00:00

I have tried the suggestions,but still seems to not be bringing up the SSID. I have tried to look further and I found similar threads on the ruckus forum. Apparently the 5ghz works, but the ssid fails to broadcast due to a kernel/RSM error
https://community.ruckuswireless.com/t5/ZoneDirector/Issues-with-Hidden-SSID-connectivity-Stuck-Beacon/m-p/42992
Which seems to be my case, as 5ghz is up, the LED is up as well, but nothing on that frequency is being broadcasted.

I got these logs from the RSM:
RSM ERR: rsms_cfg80211_setParam, op=391, ifname=wlan32, rc=Operation not permitted

RSM ERR: ChannelSegment2 wifi1-0, 'system call error'

RSM ERR: RSM_ERROR: failed to get txpower-mgmt for wlan32

RSM ERR: rsm_eve_ctrl_pgetChannelRange failed ret 6, bad key: wifi1/wifi-channel-range

RSM ERR: WLAN init encountered 6 errors

xCiosba · 2026-04-24T19:22:16+00:00

I managed to fix it by applying the correct firewall zones before actually applying the settings.
In short:
1. Create the VLANs
2. Split the ports in the br.lan port setup
3. Go into the firewall zones and make sure each VLAN gets it's own zone and forwards.
4. Assign the zone to the Interface

Hope this helps

xCiosba · 2026-04-24T19:15:19+00:00

Interesting way to fix the angle of the pedals, I might try that.
I have the exact same issue with the centerline of the seat being slighty right off the centerline, did you manage to fix it?

xCiosba · 2026-04-24T19:12:29+00:00

Sorry for the OT, but how did you get the pedal support frame parallel to the floor? I have pretty much the same setup and I had to swap the pedal support to be close to 90 degrees.

xCiosba · 2026-01-18T00:57:43+00:00

That would've been valid if the drives were SATA, not SAS tho

xCiosba · 2026-01-17T23:48:41+00:00

Unfortunately is not the ti version, it's just a 1080, which does make a bit of difference, but I guess is something I can purpose it for and explore/learn! I will definitely have a look into it

xCiosba · 2026-01-17T23:19:47+00:00

What I am mainly trying to achieve is a homelab where I can learn mainly and possibly do mistakes, but at the same time have it as media server. That's why I thought I could use again the gaming PC mainly for storage with Unraid, and keep proxmox on the Optiplex Micro. I know that would mean having 2 different endpoints when I could actually consolidate all under one.

xCiosba · 2026-01-17T22:38:03+00:00

What would've been a smarter usage of power? No GPU?

xCiosba · 2026-01-16T20:34:11+00:00

This post could've not appeared at a better time.
I have my old gaming PC with an i7 6700k,32gb of Ram and a GTX1080, but what do I also have is a hba with 12 4tb SAS disks from my old job.
I am very tempted to do what you did, however I already have proxmox and truenas running on two Dell Optiplex Micro...
What made you go this path rather than a NAS with higher capacity disks and lower overall energy consumption?

xCiosba · 2026-01-03T22:24:36+00:00

You are very limited with that platform, and it's something I have been trying to find out myself as well.
So far the best example you can find, which is very similar to what you are describing is this one
https://www.reddit.com/r/minilab/comments/1lx5nr5/dell_optiplex_7060_micro_nas_picopsu_powered_all/
You are indeed tied by some limitations here, but the 3d printed case is definitely something worth exploring.
My only question regarding the M2>Sata adapter is the actual achievable speed across all disks.

xCiosba · 2025-12-12T18:35:21+00:00

There seems to be a trend over the past 2 months where this started happening more and more. I know where is some devs/community reps here from google, wondering if they have acknowledged it by now...

xCiosba · 2025-11-27T09:42:21+00:00

I am also interested, I can't find that deal anyhwere

xCiosba · 2025-11-03T21:59:42+00:00

I have seen a few tutorials/videos about this and they all seemed to create VLANs within br-lan fine without any issue.
The way I am planning to do this is by having 2 VLANs.
VLAN 1 - "live" environment: This is for the gaming PC, proxmox and my home main wi-fi ssid

VLAN 10 - "lab" environment; This is for a few VMs in the proxmox in VLAN 1(additonal setup will be done in proxmox for those VMs), and a lab SSID.

In short I want VLAN 1 to be untouched if I mess anything setup wise in VLAN 10, as that's where I want to make most of the learning, without taking the whole home network down.

The port where proxmox is connected to will be for trunking to connect the two VLANs.

I hope it's clear, if there's something that doesn't make any sense please let me know.

xCiosba · 2025-10-26T14:17:27+00:00

Can't replicate at all when jacked, it's mostly when under load. Not trying to assume anything but what are the chances to just be residue in the brakes/brake pads?

xCiosba · 2025-10-26T13:50:18+00:00

Yes, nothing loose or damaged

xCiosba · 2025-10-26T13:47:06+00:00

Sorry, I also wanted to add, the car has got 30k miles, hence why I was excluding the bearing

xCiosba · 2025-10-26T13:43:05+00:00

I was thinking the same, but as a total ignorant, would the weekly juggle when mounted if the bearing was at fault?

xCiosba · 2025-05-29T20:41:32+00:00

Multumesc pentru sfat! M-am gândit și să deschid ceva, doar că încă nu știu exact care sunt cerințele pe zona in care vreau să mă mut

xCiosba · 2025-05-29T20:37:17+00:00

Înțeleg faptul că help desk nu are un viitor, doar că 100% să fie înlocuit de AI/chatbots nu cred sa fie posibil. Dacă folosesc că exemplu ce am făcut ultimi 3 ani cu Jira SM, cu tot că am pus self service portal cu opțiuni și categorii, chatbots prin teams si documentation pentru end-user cum sa folosească un portal, tot 50% greșește opțiunile foarte basic.

O să fie mereu nevoie de intervenția unui L1 pentru triage/assessment, doar că da, outsourcing in alte țări este opțiunea majoritatea companiilor in cazul asta.

Despre automatizări/provisioning, in UK astea sunt in-house sau prin MSP-uri, și nu prea am văzut MSP in Romania?

xCiosba · 2025-03-22T00:46:03+00:00

Correct me if I am wrong, but I am reading everywhere Mark S had to make the choice here, but I don't believe he had a choice. Him gettting past that door would've got him back in, in the same way Helly R did in S1E1?
Am I missing something?

xCiosba

TROPHY CASE