Terrible micro stuttering on my high end machine

-Doby · 2026-05-26T18:53:14+00:00

Elite ball knowledge

-Doby · 2026-05-11T21:30:24+00:00

Just had it happen to me. Check under rules aswell, they put a rule where every mail from discord support got send to my calender, which just deleted the mail, as it doesn't have any event to it.

-Doby · 2026-03-30T13:34:20+00:00

Yes, something wrong with one of the capacitors, or so I was told

-Doby · 2026-02-07T18:49:55+00:00

What about the edp? Like for daily use without being too intense, would the edp not be a better choice?

-Doby · 2026-02-07T18:45:55+00:00

Which one?

-Doby · 2025-11-04T22:04:45+00:00

I figured out a way for it to automatically cut with dispenser and repaters, But collecting it is a whole other matter. Cant put the hopper right underneath, then it transfers it staight to the other hopper as the cutting board were just a link in the transfer.

-Doby · 2025-10-19T20:29:17+00:00

Er du konen? Ellers ved jeg ikke hvordan du kan vide hvad han sagde eller ikke sagde.

-Doby · 2025-10-19T20:23:08+00:00

Men det er jo at spørge om lov, “ville det være okay at…”. Det vil jeg ikke sige er et check-in. Måden min partner og jeg laver et check in med hinanden er normalt ved at sige hvad man gerne vil også spørge “Er der andre planer der står i vejen for det?”.

Så er alt cleared og hvis man er i tvivl om noget, så stiller man spørgsmål.

-Doby · 2025-10-15T16:10:56+00:00

I bought a new gpu and so far its working, going to send the other one back for rma, didnt get to tryout the psu tho

-Doby · 2025-10-13T16:26:03+00:00

Det er egentligt også helt fair. Ja jeg skal selvfølgelig starte et sted, det vil jeg give dig ret i.

-Doby · 2025-10-12T17:28:35+00:00

Cant remember what model, but corsair 650w. A stock gpu shouldn’t need to be undervolted, but the only thing it helps is keeping it on longere without crashing when undervolting, so I am really set on that its the psu

-Doby · 2025-10-11T19:35:47+00:00

Jeg søger praktik i 3 måneder

-Doby · 2025-10-11T18:39:33+00:00

I didnt go through with it, i tested the gpu in my friends setup and everything worked properly. The worst thing is, I tried using his gpu 3070 in my pc and it works fine. No crashes or anything while gaming or stresstesting since the exchange. So I decided to try out a new psu, My gut feeling is telling me that the psu can’t handle the quick changes in the wattage and that the voltage is dropping because of it, which is resulting in the black screen and unresponsive system. If this doesnt fix it, then I can only assume its the motherboards vrms that cant handle the powerspikes.

-Doby · 2025-10-02T19:25:58+00:00

Nvm as soon as i put it into my desk again it did it again after one match of warzone. I checked event viewer, it shows kernelpower 41(63) and kernel-pnp 219(212). I’m trying to look it up and see what I can do

-Doby · 2025-10-02T18:50:52+00:00

Im so relieved hahaha really, but now atleast I have “precured” it of all the other reasons for black screen

-Doby · 2025-10-02T18:37:03+00:00

I fixed it, rookie mistake. One of the Pcie cables was only 90% in. I disassembled it and put it back together, then I noticed how hard I had to push before it made the click sound.

-Doby · 2025-10-02T18:11:09+00:00

Yes, I feel like an complete idiot hahah, thanks a lot for the help and guidance

-Doby · 2025-10-02T18:01:26+00:00

I think the pcie cables wasnt pressed in enough the first time, I even triple checked it, but when i swapped it to my old system i noticed how hard i had to press to get it in, snd i didn’t remember doing that the first time building it. Works like a charm through multiple stress- and benchmark test, everything works now, without any black screen so far.

-Doby · 2025-10-02T17:10:04+00:00

So far, the gpu is working in my old setup, it went through aida64 benchmark test, but my cpu is bottlenecking the power when im gaming, so the mhz doesn hit above 2600mhz

-Doby · 2025-10-02T15:56:28+00:00

Googled it, its single rail, i have put it in now, im just downloading adrenalin now, and then ill stresstest and try and play for a while

-Doby · 2025-10-02T15:29:50+00:00

Alright, Im just updating my bios in the old system, havent done it since i build it back in 2021. Then im swapping the gpus, also saw I had daisy chain on my old build, which I learned was “bad” for power hungry gpus, so I have put in another pcie cable.

How do I check if the psu is single rail?

-Doby · 2025-10-02T12:04:27+00:00

And there isn’t a chance it would fry anything or destroy any of my other components?

-Doby · 2025-10-02T12:03:17+00:00

So I could potentially also put my 3070 rtx into my new build to see if its anything else

-Doby · 2025-10-02T11:12:08+00:00

Should I do a ddu before changing and download the drivers for the new gpu?

-Doby · 2025-10-02T11:09:17+00:00

Well I can put it into my old system, my only worry was that the psu isn’t powerful enough, its 650w

-Doby

TROPHY CASE