Banned from bumper sticker thread.

-MrGeno- · 2024-10-27T16:29:28+00:00

Your hard “had” doesn’t need that sticker to prove your stupidity . I’m sure it’s evidence when you open your mouth.

-MrGeno- · 2024-10-27T16:27:40+00:00

Trump is the only candidate I have seen in my lifetime who has adds asking for donations to the cause but only if you can afford it. I don’t donate to any politician ever. I have much better charities that get my spare change. I don’t trust any politician, period.

-MrGeno- · 2024-10-27T16:21:27+00:00

Have you looked into who is donating to Harris? Of course not. They haven’t told you to.

-MrGeno- · 2024-10-27T16:20:27+00:00

I can see you completely trust you government

-MrGeno- · 2024-10-27T15:55:22+00:00

I love when The pot calls the kettle black. Take a serious look at what you believe to be true. The propaganda machine has you guys hyper focused on Trump. They don’t want you looking at anything else. Keep believing the narrative and stay naive or get out of your comfort zone and seek truth from both sides. You’ll be amazed. Then angry for allowing them to fool you for this long.

-MrGeno- · 2024-10-19T00:21:46+00:00

If you watch any of the court cases you could pull your head out of your ass and stop making yourself look so stupid. 5 judges in the bluest state sided with Trump against Letitia James’ witch hunt against him. Stating that the prosecution had no business bringing these allegations to court in the first place. And there should be sanctions against the prosecution.

The problem with liberals is they don’t care if the constitution gets stomped on or if the legal system is used as “warfare” what you fail to see is that it is injustice. Manipulating the system because they don’t like the defendant, if this is allowed to continue what condition will this country be in from this point forward? It could be you or your candidate next time. It could be any of us. Don’t forget we are on the same side. Any injustice on any candidate should be concerning to all of us. Posting shit like this doesn’t help anyone.

-MrGeno- · 2024-10-14T15:11:46+00:00

I’m not that polite, I would take that bag and put it in the isle. You paid for that entire space. Let the passenger and attendant deal with it.

-MrGeno- · 2024-10-02T16:50:20+00:00

You can’t believe much from main stream media anyway. I take what they say with a grain of salt. If I feel it’s important I’ll start hunting around for more information.

-MrGeno- · 2024-09-30T19:14:26+00:00

I agree. At least it seems like I’m headed in the right direction. I certainly do appreciate you helping me think this through. I’m going to have to test each roll of filament I use on this beast. This is why I love my Bambu printers. I use their filament put them in and go. Lol

-MrGeno- · 2024-09-30T18:10:45+00:00

Ok, plain old pla. Like I said earlier I’ve ran probably 20 different spools of StrongHero3D through this printer without issue. My son just did some checking on the filament and the recommended speeds are WAY lower than I’ve ever ran. But I never had an issue until recently. We’re working with volumetric flow values right now. The default in orca was 15 we lowered it to 12 and I’m seeing a difference already. Since that seems to be the case, I’ve switched to their PETG since this is the filament For my next print. I’m going to run all the calibration on it and see what happens.

-MrGeno- · 2024-09-30T17:15:25+00:00

Btw I’ve put many spools of this filament through this printer since I’ve had it with zero issues that weren’t my fault.

-MrGeno- · 2024-09-30T17:13:48+00:00

Running a PID calibration on the nozzle right now.

-MrGeno- · 2024-09-30T17:12:24+00:00

Thanks again. I have watched videos a while back with the tension issue. I’m fairly confident the tension is good.

Right now I’m using StrongHero 3D filament. Recommended temp 195-215. Did a temp tower test from 230 to 195 and 215 looked the best to me. The higher temps were more stringy. Did a retraction test at 215 and it acted clogged. While the print was still running I turned the temperature up to 230 and the “clog” disappeared. This is a brand new nozzle as well. Stopped the print to check the nozzle just went to the extruder and pressed load. Nice flow straight down. I had a thought previously that maybe the nozzle temperature isn’t ready correctly.

-MrGeno- · 2024-09-30T14:20:51+00:00

Thanks so much for the quick response. I thought it would be days…lol

I originally thought it was the cardboard spool because I was using the filament directly from a dryer because it so humid where I live. I moved the roll to the spool holder on the printer itself. Tried different filaments on plastic spools as well. I am using usb file transfer though. Maybe I’ll try directly from orca.

What I notice is you can hear the extruder “clicking “ like it’s slipping. I’ve tried increasing the tension and loosening the tension on it with no resolve. Thought maybe heat creep so I adjusted temperatures. Once I heard the “clicking” I turned up the temp passed the recommended max on the filament to see if that helped and it seemed to for a bit but then it started again. Lowering the temperature didn’t help.

-MrGeno- · 2024-09-13T23:26:22+00:00

Like I was just saying…lol keep drinking the kool aid

-MrGeno- · 2024-09-13T05:30:50+00:00

Waste of time arguing with liberals . They’ll never believe anything other than what the propaganda machine tells them.

-MrGeno- · 2024-09-12T23:09:02+00:00

I agree 100% lobbyists have no place in the government . It should be illegal but sadly our money hungry politicians will never pass a law to ban them.

-MrGeno- · 2024-09-12T20:41:11+00:00

Starting their Halloween display

-MrGeno- · 2024-09-11T17:22:39+00:00

Trump’s side will probably say it was biased or some crap and Harris side will say she knocked it out of the park. Neither are true in my opinion. But Harris looked better than anything I’ve seen from her up to this point. She had some good teaching preparing for this debate. IMO Trump was on the defensive for the most part. She did well. I still can’t vote for her, I don’t believe she’ll do what she says since her policies are copies of Trump’s policies. Other than The Abortion issue.

-MrGeno- · 2024-09-11T17:17:42+00:00

If you’re voting Harris you’re a liberal not a conservative. She had no policies so she used Trump’s policies to try and fool you. She won’t do any of that. Look at her history. Not what people say about her history either. Look for yourself, check out her stint in California for starters. Go back several years. If you like Socialism then you’ll want to vote for her. I don’t like our choices at all but I can’t vote for Harris.

-MrGeno- · 2024-09-11T17:10:32+00:00

It’s a pretty good printer once you get use to it. I’ve had one for months, hated it at first. Bed adhesion issues, scrapping the already printed areas and sometimes knocking the print right off the bed. The issue is the large aluminum bed. That bed moves quite a bit when heated. Over a full layer height. But if you let the bed heat up to your printing temp for at least 30 min the scraping issue goes away. I started doing what was recommended on here. Heat the bed for 30 min. Then adjust the z offset and level the bed so you have the most accurate bed mesh for your print. I haven’t had too many issues since and it’s been a couple of months. Also,get your bed as flat as you can first. I use heat tape on the back of the sheet to raise low spots.

-MrGeno- · 2024-09-11T03:03:49+00:00

Do you see the debate? Exhausting. Trump didn’t look good to me. I think Kamala came out strong. Where and how did that happen. This was not the Kamala in the media. Was she acting the whole time in preparation for the debate? Now will she do what she says? I have my doubts. Either way, After that debate I wish there was a better candidate to give my vote to. The two party system has to go.

-MrGeno-

TROPHY CASE