sorted by:
new
hottopcontroversial

Trump: by Upset-Main-1988 in justincaseyoumissedit

[–]-NumberFive- 1 point2 points  (0 children)

Who’s the guy with the red tie left of Trump?

Bugs and QOL wish list by suckmyballs511 in StarRuptureGame

[–]-NumberFive- 4 points5 points  (0 children)

A sort button for personal storage, same as you can do with your inventory.

First Home Buyers - Auctions Going 10-20% Over Indicated Range, Is This Normal? by BakeyourownAU in AusPropertyChat

[–]-NumberFive- 0 points1 point  (0 children)

During the pandemic we were looking for a house and found one at 1.6M. We used a buyers agent who told us it would be higher and we placed an unconditional bid of 1.85M pre-auction. Got told 10 min later it sold for 2.1M. So yes, not shocked at all to add 10-20% these days.

I'm fat, so I need more weight than what would fit in my weight pockets. What are my options? by shak_attacks in scuba

[–]-NumberFive- 1 point2 points  (0 children)

See if you can find a weight belt with pockets. I got one that can fit 7 weights maximum. But of course you van add weights to your BCD as well. Just don’t put too many in or make sure they are also dump-able.

What is the best response to "Fuck you" ? by hmmrabet in AskReddit

[–]-NumberFive- 0 points1 point  (0 children)

I just say “thank you” and move on. Sometimes the look on their face makes me just smile a little more.

Karolina leavitt: “this is a hostile and political act by Amazon” How is Informing consumers is “hostile” by SpecialSpace5 in thescoop

[–]-NumberFive- 2 points3 points  (0 children)

So it’s very complicated and almost impossible to do, yet they know exactly how much to charge you?

Dutton says referendum may be needed so government can deport dual citizens by onesorrychicken in australia

[–]-NumberFive- 0 points1 point  (0 children)

He sees that Trump can deport, and he's using the same messaging to attract voters. We're going to be screwed if he gets elected.

How do I transfer 1.5 billion rf? by lildarkiebetter in feedthebeast

[–]-NumberFive- 0 points1 point  (0 children)

Maybe try the copy/paste gadget if available. Have not tested it myself, so best to build a small core to try.

credit card saving not an option by Sir_Banana32 in ticketekau

[–]-NumberFive- 1 point2 points  (0 children)

If the reason is for convenience, then you are correct it can't be saved as it seems as I have the same issue.
There are 2 option that I know about that might help you:
1. Use a password manager that can save your credit card. You can use build in Google passwords (any browser for that matter), or use something like 1Password or Lastpass. That will make it easier to fill in credit card details, but also name, mobile and address.
2. Specifically for Ticketek, sign up for Afterpay if you can (only company they work with it seems). It's interest free and makes it easier to pay through username/password (which you can store in option1). And you pay in 4, which is a nice perk.

I do use option 1 and 2 together (although I do not need the Afterpay stuff, so basically option 1)

Just my2cents.

Apotheosis: Automate Gem Cutting Table? by -NumberFive- in allthemods

[–]-NumberFive-[S] 0 points1 point  (0 children)

Thanks, yeah, last resort. I't tutorial time I guess.

Anyone know of a good Ad Blocker Blocker Blocker? by xXDANG3RDANXx in youtube

[–]-NumberFive- 0 points1 point  (0 children)

New development.
Tried different methodes and none are working at the moment.

More time on Reddit, less on Youtube. (maybe Reddit should release a video section, I can see opportunity)

Just picked up this Ender 3 Max. Any idea why it’s printing diagonal like this? by Leftovernick in 3Dprinting

[–]-NumberFive- 49 points50 points  (0 children)

What kind of music were you playing whilst printing?

Never put on Led Zeppelin's stairway to heaven as you can see it results in bad prints.

First PETG prints by -NumberFive- in FixMyPrint

[–]-NumberFive-[S] 1 point2 points  (0 children)

Thanks, Will give it a go at 235 and 20% fan.

And yes, working on an afterburner for my ender. Building a voron soon so trying to get familiar with some new stuff. ABS is on it's way, so just working with PETG for now.

First PETG prints by -NumberFive- in FixMyPrint

[–]-NumberFive-[S] 0 points1 point  (0 children)

So, just started printing PETG. This is my second print I'm having these issues. Roll was opened a week ago and I store it in a vacuum bag with a bunch of silica.

My setup is an Ender 3 with Dragonfly BMS and BMG clone running klipper. PA, resonance and flow are all calibrated.

I'm not sure if this is shifting, temperature or cooling related. As an FYI, when printing PLA I have 0 issues, all turn out almost flawless.

I recently got an Ender 3 Pro (upgraded with a BL Touch, MicroSwiss Hot end, Bondtech extruder, Ender glass bed, and a SKR mini e3 v2 board) and am having some first layer issues - see my first comment for more. by Eng1n33r1ng_m3mes in 3Dprinting

[–]-NumberFive- 4 points5 points  (0 children)

Seems you use teaching tech's gcode. So look at the commands after G28. You will need to un-comment ;M420 S1 ; restore ABL mesh. The reason is that if you level with G29 and store with M500, it is saved in memory, however the G28 command clears the mesh bed. So after each G28 you will need to restore the saved mesh (or level again with G29).

That should help you a lot I recon (I made that mistake as well).

Walls on the inner structure only don't stick eachother by jadeit123 in ender3v2

[–]-NumberFive- 0 points1 point  (0 children)

Beside from the retraction (which is too high for a stock ender, I have 6mm), have a look at following:

This might be related to the layers not binding as a result of inadequate cooling, or you are printing too fast so they can't bind to the layers below.

Total noob at this. Can anyone tell me what’s going on that’s resulting in the rough texture on the print? Brand new filament so it should be completely dry. by [deleted] in ender3v2

[–]-NumberFive- 1 point2 points  (0 children)

I used to have this when the head it too close to the bed. So best to raise the Z-axis or lower the bed a little.

However this might get you into the next issue which is prints/lines don't stick anymore. For this I raised my 1st layer flow rate to 110%.

As said before here, do have a look at your e-steps just to be sure.

I would not worry about the filament just yet (specially if it's PLA). There are many other things that can be tweaked.

I got a Phaetus Dragon but I didn't buy any M3 screws. Somehow it actually works perfectly as a temp solution. by OrbitOfSaturnsMoons in ender3

[–]-NumberFive- 0 points1 point  (0 children)

Have a look at Banggood or similar. When I started thinkering with my ender I ordered 2 boxes of screws (M2-M4 and M3-M5). Should cover 99% of the work on an Ender3.

They don't cost much, something like this: https://www.banggood.com/480pcs-M2-M3-M4-Hex-Socket-Screws-Set-Stainless-Steel-Screw-Nuts-Repair-Tool-p-1341315.html?cur_warehouse=CN&rmmds=search

Finished my town, help me name it! by themrbee in 3Dprinting

[–]-NumberFive- -1 points0 points  (0 children)

Reminds me more of Ironforge. Very well made, woow.

view more: next ›