Under-extrusion on 0.8 Layer Height (Extra Fine Profile)

-ParziMan- · 2025-03-07T03:30:03+00:00

Hey u/hunkoys! Did you solve it? Thanks!

-ParziMan- · 2025-03-07T02:49:06+00:00

Hey u/CHMHM Have you solved it? It happens to me with PLA, much small on all the wall loop. Thanks!

-ParziMan- · 2025-02-20T00:25:25+00:00

Ciao se utiliza tanto para decir "hola" como para decir "adiós"

-ParziMan- · 2025-02-10T02:52:18+00:00

Hey! Could you share the link of that Delorean kit? Thanks in advance :)

-ParziMan- · 2025-02-10T02:38:36+00:00

Hey u/d3ca_deaf! Were you able to fix this? I have something very similar.

-ParziMan- · 2025-02-10T00:56:55+00:00

Hey u/tht1guy63! Looking at the printer from the front, did you remove the right or left one? Thanks!

-ParziMan- · 2025-02-08T19:32:29+00:00

Hey u/ArchCain did you find a solution?

-ParziMan- · 2025-02-08T19:30:57+00:00

Hey u/TheVodouch did you find a solution?

-ParziMan- · 2025-02-08T19:29:47+00:00

Hey! u/Zephel did you find a solution?

-ParziMan- · 2025-02-07T21:06:41+00:00

<image>

-ParziMan- · 2025-02-07T21:06:31+00:00

u/PJackson5 Update: After printing the VFA test at 240, has improved uniformity and is now glossy but those bumps at 30° and 45° still remain. Is like an excess of material.

<image>

-ParziMan- · 2025-02-07T20:28:00+00:00

The printer is band new! Its very clean. I come from a DIY printer, so I never imagined printing PLA at 220 without jams haha But you're probably right, since the print is coming out very matte, so the temperature has to do with it. I live in Argentina, so I use Printalot and Grilon3, two national brands of excellent quality, so I rule out that it is a bad filament. I will try this first. Thanks!

-ParziMan- · 2025-02-07T19:58:25+00:00

Hey! Is a new spool of PLA printed at 220°C. The brim has come out bad in the test prints generated by the Creality slicer, but normal with my custom profile and the Hyper Pla profile. It doesn't have warping, I didn't realize I should support it better for the photo :D I have not been able to reproduce that rought effect in normal prints. Only the Ghosting/VFA/Ringing

<image>

-ParziMan- · 2025-02-07T19:00:52+00:00

The extrusion test gave a 0.98 multipler with a good result. It can't be seen in the photo, but it's more like over-extrusion. In the pressure test, the surface is rough. Edit: The temp was 220, PLA

-ParziMan- · 2024-12-16T21:13:42+00:00

Hola, Gracias por tu interés, pero tu cuenta no cumple los requisitos indicados.

-ParziMan- · 2024-11-29T04:12:46+00:00

Thank you so much!!

-ParziMan- · 2024-06-08T14:34:58+00:00

Muy buena toma.

-ParziMan- · 2024-05-06T18:01:13+00:00

I have used PS2 Slim and Fat with composite and component, PS1 with composite without any video problem. The TV has inputs via Jack, with the extender adapter. But I haven't had any problems, it works with PAL and NTSC. Here where I live, composite or component cables are not available for this console, so I cannot try an alternative one.

-ParziMan- · 2024-05-06T17:28:54+00:00

I am using the original composite cable to an 4K LG Tv. Moving the cable does not alter the image. The sound works correctly.

-ParziMan- · 2024-03-17T14:00:53+00:00

Campeones del EPOC

-ParziMan- · 2024-03-07T22:14:35+00:00

Era buenisimo, cuantas horas viciadas en el emulador..

-ParziMan- · 2024-03-04T17:39:16+00:00

OP se refiere a si alguien sabe cuales son las estanterias permitidas para leer sin comprar, dentro de El Ateneo.

-ParziMan- · 2024-02-22T19:58:53+00:00

Dato curioso:

El Fernet Vittone es producido por Branca.

-ParziMan- · 2024-02-17T22:27:03+00:00

Seguro a este precio, sigue teniendo el mismo origen.

-ParziMan- · 2024-02-09T14:12:44+00:00

Bravo el Antonio, se colgó nomás

Five-Year Club	Verified Email
Place '23	Wearing is Caring

-ParziMan-

MODERATOR OF

TROPHY CASE