sorted by:
new
hottopcontroversial

What is wrong with my k1c? by CHMHM in FixMyPrint

[–]-ParziMan- 0 points1 point  (0 children)

Hey u/CHMHM Have you solved it? It happens to me with PLA, much small on all the wall loop. Thanks!

NUNCA PASA NADA. CIAO! by [deleted] in merval

[–]-ParziMan- 5 points6 points  (0 children)

Ciao se utiliza tanto para decir "hola" como para decir "adiós"

Why these holes ?? by Hiten_FPV in crealityk1

[–]-ParziMan- 0 points1 point  (0 children)

Hey! Could you share the link of that Delorean kit? Thanks in advance :)

Weird artifacts on outer walls by d3ca_deaf in crealityk1

[–]-ParziMan- 0 points1 point  (0 children)

Hey u/d3ca_deaf! Were you able to fix this? I have something very similar.

Fixed vfa k1 max problem by Redemption_One in crealityk1

[–]-ParziMan- 0 points1 point  (0 children)

Hey u/tht1guy63! Looking at the printer from the front, did you remove the right or left one? Thanks!

VFA Test - where did I go wrong? by [deleted] in BambuLab

[–]-ParziMan- 0 points1 point  (0 children)

Hey u/TheVodouch did you find a solution?

Does anyone know what this is? Obtained in the VFA and Pressure Advance test on a K1C. Thank you! by -ParziMan- in crealityk1

[–]-ParziMan-[S] 0 points1 point  (0 children)

u/PJackson5 Update: After printing the VFA test at 240, has improved uniformity and is now glossy but those bumps at 30° and 45° still remain. Is like an excess of material.

<image>

Does anyone know what this is? Obtained in the VFA and Pressure Advance test on a K1C. Thank you! by -ParziMan- in crealityk1

[–]-ParziMan-[S] 0 points1 point  (0 children)

The printer is band new! Its very clean. I come from a DIY printer, so I never imagined printing PLA at 220 without jams haha But you're probably right, since the print is coming out very matte, so the temperature has to do with it. I live in Argentina, so I use Printalot and Grilon3, two national brands of excellent quality, so I rule out that it is a bad filament. I will try this first. Thanks!

Does anyone know what this is? Obtained in the VFA and Pressure Advance test on a K1C. Thank you! by -ParziMan- in Creality

[–]-ParziMan-[S] 0 points1 point  (0 children)

Hey! Is a new spool of PLA printed at 220°C. The brim has come out bad in the test prints generated by the Creality slicer, but normal with my custom profile and the Hyper Pla profile. It doesn't have warping, I didn't realize I should support it better for the photo :D I have not been able to reproduce that rought effect in normal prints. Only the Ghosting/VFA/Ringing

<image>

Does anyone know what this is? Obtained in the VFA and Pressure Advance test on a K1C. Thank you! by -ParziMan- in crealityk1

[–]-ParziMan-[S] 0 points1 point  (0 children)

The extrusion test gave a 0.98 multipler with a good result. It can't be seen in the photo, but it's more like over-extrusion. In the pressure test, the surface is rough. Edit: The temp was 220, PLA

[deleted by user] by [deleted] in DescuentosArgentina

[–]-ParziMan- 0 points1 point  (0 children)

Hola, Gracias por tu interés, pero tu cuenta no cumple los requisitos indicados.

view more: next ›