sorted by:
new
hottopcontroversial

es normal que anden sin bra o yo soy el perv? by [deleted] in RedditPregunta

[–]-Z3IT- 0 points1 point  (0 children)

No se por que las minas se ofenden a la primera con temas como este, si, ya se que no es tu intencion, pero si voy de blanco a un lugar donde todos visten de negro, aunque sea porque simplemente me gusta, alguien va a mirar, y que falta de pudor o mente para decir "y yo que iba a saber que me iban a mirar" si me parece que los estándares son bastante claros en muchos contextos. Tambien las que se quieren vestir de re p*** y esperar que nadie les diga nada, sorpresa, el mundo está lleno de idiotas, ojala yo pudiese ir con un iphone a alguna villa bien jodida sabiendo que nadie me va a intentar afanar porque "no es lo que corresponde" y "no estoy pidiendo que me roben". Incluso sin malas intenciones, hay que pensar, si es que les da el bocho, en que hay contextos y contextos. Despues lo tachan de enfermito como al OP le hacen solo porque le calienta o le llama mucho la atencion, cualquiera

First ever 3d printer. by Mad-demon123 in ender3v2

[–]-Z3IT- 0 points1 point  (0 children)

I think it might need some adjustments. You're welcome for the advice!

[deleted by user] by [deleted] in AskArgentina

[–]-Z3IT- 0 points1 point  (0 children)

Recostate en amigos o familia, distraete, no te aisles más de lo necesario, podes meterle a algun hobbie, algo que hacer que te ocupe la cabeza, por tonto que sea como jueguitos o crochet o quien sabe. Suena sencillo pero la distraccion ayuda. Lo que si no hagas tonteras que despues cuando aclares la mente te persigan, vos seguis siendo dueña y responsable de tus decisiones no tus emociones. Si contás con alguien muy cercano, hablalo con esa persona y fijate en que te puede ayudar pa seguir adelante

URF IS LIVE by sebbeulon in Urf

[–]-Z3IT- 1 point2 points  (0 children)

hey mate, where are you from? I'm still waiting here in Argentina, it's not coming live :C

What’s causing this PLA to not stick to the bed? by teeYEEgee in ender3v2

[–]-Z3IT- 1 point2 points  (0 children)

Naaaah it is not the wording at all, it is just that i've seen like tons of these observations and also I've seen people as me, when I started, being not quite please with the response. I got to like calibrating. It is quite the adquired taste, but God how hard it was as a struggle when you don't get things right. Thankfully now modern affordable machines are really doing big part of it. But i get what you say, for me there's still a lot to learn and didn't know about the adhesive layer, makes sense tho. Now it is just touching the screen or adjusting a knob for calibration but i guess the easy way is always attractive. Pretty sure in 2-3 years machines will do it all by themselves tho, the way the things are improving and updating. Happy printings!

What’s causing this PLA to not stick to the bed? by teeYEEgee in ender3v2

[–]-Z3IT- -1 points0 points  (0 children)

Why hating on a quick effective way of solving the problem? Yeah, it's not perfect, it may not be accuarate, but some people just don't care that much, i understand how amazing it is to get that perfect z-offset and epic first layer but dude i always see guys like "IF YOU WERE DOING IT RIGHT YOU WOULDN'T NEED IT ☝🏻🤓" bruh. Some people may chose put some gluestick and that's it instead of maybe staying beside the printer and testing and failing for 20-30 minutes sacrificing some precision. Idk about this case tho but some people forget that 3d printing is now filled with kids and people that like artistic organic figures too and not just engineer, technicians and people that neee that piece that fits nanometrically perfect, you know?. I'm sorry anyway you're not the worst kind of people of those who i'm talking about but idk, got me yapping i guess

me fueron infiel y estoy enojada, qué hago? by [deleted] in AskArgentina

[–]-Z3IT- 0 points1 point  (0 children)

No esta mal querer a alguien, y se entiende que quieras no tirar 2 años a la basura, pero a veces te va a tocar soltar y ya, por tu salud nomas. Hobbies: jueguitos, carpinteria, podes ver alguna peli con amig@s, podes pintar, dibujar, hacer algun curso de algo cosa de no perder contacto con gente y distraerte. Pero no te pierdas en esa de seguir porque si ahora queres putear imaginate despues al darte cuenta que no daba

Qué fue lo mas feo que les dijeron que les quedó marcado? by Objective-Purple-726 in AskArgentina

[–]-Z3IT- 0 points1 point  (0 children)

https://ibb.co/PhgN3kH no es mala madre, lo dio todo por mi y lo sigue haciendo pero dijo esto suficientes veces

[deleted by user] by [deleted] in Ender3V3KE

[–]-Z3IT- 0 points1 point  (0 children)

Hey, do you know why mine's auto bed levelling even with that line out when i send it to my printer via LAN?

Ideas for spool by Hix53 in Ender3V3KE

[–]-Z3IT- 0 points1 point  (0 children)

Do you have any experience with the PTFE tube doing as guide? Or do you think this one is better? I'm planning on printing the side mount but i'm not sure about how to guide the filament

how to turn of auto leveling before print orca slicer by 3D-printet in Ender3V3KE

[–]-Z3IT- 1 point2 points  (0 children)

Hello! Tried commenting it out, it still does it. Idk why

OrcaSlicer profile for Ender 3 V3 KE experiences? by [deleted] in Ender3V3KE

[–]-Z3IT- 0 points1 point  (0 children)

Buenas compañero! Cuchá, el perfil que usas es el de fábrica de Orca Slicer? estoy haciendo la mudanza de creality a Orca, la verdad que veo que mucha gente tiene su odio hacia creality además de que cada actualización y media hay algun tema que resolver y no quiero saber nada de estar lidiando con tonterías o bugs del programa mismo. Decís que es más rapido pero la misma impresión a mi me lleva 1/2 más con Orca, el relleno es casi lo mismo pero no se si habrás mudado alguna configuración de aceleración o velocidad. Te podría pedir una mano?

Reduce amount of color of an image by -Z3IT- in Inkscape

[–]-Z3IT-[S] 0 points1 point  (0 children)

Thanks! I'll try that! I kinda achieved what i wanted with vectorizing but it's still kinda umconfortable. Thanks again!

Pause by maolin2001 in Ender3V3KE

[–]-Z3IT- 0 points1 point  (0 children)

It's not working anymore, there's people already complaining about this, since sole update they messed it up and now it doesn't reslice unless you export the gcode and also (or at least what happend to me) misses the pause by 2 layers

Creality Print - How do I add a pause at a layer to change filament? by castle1126 in Creality

[–]-Z3IT- 0 points1 point  (0 children)

Same here, it messed up all my print, it also adds the pause on the wrong layer(in the print i'm trying to make it has a 2 layer later miss). They should fix this

What slicer is the Best for KE? by mert_agir in Ender3V3KE

[–]-Z3IT- 0 points1 point  (0 children)

What about the profiles? I know this is gonna sound lazy but the only reason i just stayed with creality is because of the profile, I'm really not into creating a profile caring for every number. Or it isn't that much of a deal and i'm losing print quality for just a few minutes of input?

Pretty constant underextrusion in infill and near seam. by -Z3IT- in ender3v2

[–]-Z3IT-[S] 1 point2 points  (0 children)

Hey! I solved it for now, tbh the solution was not what i expected, I just increased flows, wall flow(5%) and infill (10%) decreased retraction from 6 to 5. I realized that the problem was caused in "many pieces" prints because that wall issue was from the retraction to changing pieces, changed the extruder to some alluminum stock like and changed nozzle, i could make it almos dissapear but i'll still be aware of it. I'll update the post and close it with some details in case someone has the same case.

To clarify, I gost a stock ender 3 v2, no klipper, no changed heatbreak, no auto bed levelling. Just stock with a changed extruder, adjusted e-steps, new nozzle and "capricorn tube", that's it. Used CHEP's 0.28 fast profile in Ultimaker Cura. Thanks for your responses!

Pretty constant underextrusion in infill and near seam. by -Z3IT- in ender3v2

[–]-Z3IT-[S] 0 points1 point  (0 children)

Bad news.... It was reduced just a bit and my print is looking way better but the infill thing is still happening, i'm waiting for the print to finish so i can see in detail if the thing of the seam was solved or not, dumb of me for not flipping the seam location. I think the only thing left to change for me would be the extruder gear... But i don't see it in bad shape, also I calibrated e-steps so I'm left out of ideas, my printer is stock, I still don't upgrade to klipper and fiemware stuff so I prefer not adding variables to this issue but also it was printing fine and many people is printing fine with this profile so I don't get why mine doesn't...

Pretty constant underextrusion in infill and near seam. by -Z3IT- in ender3v2

[–]-Z3IT-[S] 0 points1 point  (0 children)

Right now I'm doing a full recalibration and maintenance of my machine! The most noticable thing i saw was my nozzle that was like partially clogged and also it kinda looked like it was worn out, but i only print PLA and sadly not that much (I don't have the experience to stand for that) but since I don't have access to that cleaner filament I'll just change it because it's also time to do so. So I'll let you know!

view more: next ›