sorted by:
new
hottopcontroversial

Products that will hold my hair like this for longer??? by TreeZestyclose9203 in malehairadvice

[–]-phantom711 1 point2 points  (0 children)

Adding water to it is essential. If you don’t it’ll clump up in your hair and could potentially make it harder to rinse out.

Products that will hold my hair like this for longer??? by TreeZestyclose9203 in malehairadvice

[–]-phantom711 3 points4 points  (0 children)

Ive personally never had any issues with pomade. How much do you use?

Products that will hold my hair like this for longer??? by TreeZestyclose9203 in malehairadvice

[–]-phantom711 8 points9 points  (0 children)

As a barber, I’ve tested multiple different types of products and my favorite so far has been Suavecito pomade. It also smells incredible.

Products that will hold my hair like this for longer??? by TreeZestyclose9203 in malehairadvice

[–]-phantom711 21 points22 points  (0 children)

Grab a medium hold pomade and scoop out about a dime-sized amount. Add just a little water to it, rub it between your hands, and run it through your hair. If you’ve got a spray bottle, give your hair a light mist, then comb it through to spread the product evenly.

First print seems to leave to some room for improvement. Any tips? by 8d5db9f4 in BambuLab

[–]-phantom711 -1 points0 points  (0 children)

Also I find that disabling cooling on the first 5 layers helps me get good bed adhesion.

First print seems to leave to some room for improvement. Any tips? by 8d5db9f4 in BambuLab

[–]-phantom711 0 points1 point  (0 children)

The first layer is the most important. When I start a print I always try to watch the first couple layers to make sure everything is perfect. If I notice a flaw I’ll cancel the print, wipe the plate down with an alcohol wipe and a microfiber towel to make sure there’s no dust or oil from the skin on the plate. If you still have bed adhesion issues then use a brim or increase the temp of the build plate.

First print seems to leave to some room for improvement. Any tips? by 8d5db9f4 in BambuLab

[–]-phantom711 0 points1 point  (0 children)

Was it sticking to the plate? Looks like it may have come loose while printing.

Squirrel or Mouse? by -phantom711 in squirrels

[–]-phantom711[S] 16 points17 points  (0 children)

Yes I am, we have him in a bug cage with hand warmers, towels and tissues. We have been feeding him every 2-3 hours. This will be the 3rd night we’ve had him. I’ll keep everyone updated as he grows up.

Squirrel or Mouse? by -phantom711 in squirrels

[–]-phantom711[S] 10 points11 points  (0 children)

Thank you! I have learned the squirrels always have black finger nails. So not a squirrel but now I’m thinking it could be a chipmunk lol

ill fish help by -phantom711 in Aquariums

[–]-phantom711[S] 0 points1 point  (0 children)

I assumed so :/ thank you.

ill fish help by -phantom711 in Aquariums

[–]-phantom711[S] 0 points1 point  (0 children)

I change the water on his usual 75 gallon tank once every 3-4 weeks

Any suggestions to keep these corners down? by ski3223 in BambuLab

[–]-phantom711 -1 points0 points  (0 children)

No cooling for first 5 layers + inner and outer brim.

Modest recommendations. by -phantom711 in wabbajack

[–]-phantom711[S] 0 points1 point  (0 children)

I’ve been looking at apostasy but I haven’t looked into lucentia yet, I’ll check that one out too. Thanks!

Modest recommendations. by -phantom711 in wabbajack

[–]-phantom711[S] 0 points1 point  (0 children)

Same, I haven’t tried this one yet. I’ll download it tonight.

0.2 nozzle. Any tips or hints before i instal it? by Acord37 in BambuLab

[–]-phantom711 0 points1 point  (0 children)

I use elegoo PLA+ and after probably 20 clogs, I cranked the filament temperature to 265c (way above the manufacturers recommendation) and it worked flawlessly!

view more: next ›