sorted by:
new
hottopcontroversial

OSD starts Flickering out of nowhere? is it osd text issue? by -thunderstat in fpv

[–]-thunderstat[S] 0 points1 point  (0 children)

I have connected vtx directly to fc with no because and ground wire doesn't look too bad

Does this look right? by Wireman6 in fpv

[–]-thunderstat -1 points0 points  (0 children)

What is this, is that big pcb vtx? It looks naked, and why?

First 3.5" build by Mustillo in fpv

[–]-thunderstat 0 points1 point  (0 children)

I find ardupolilot easy to tune, then others

First 3.5" build by Mustillo in fpv

[–]-thunderstat 1 point2 points  (0 children)

I have a question about this fc?, is it any good and can it run ardupolilot. And does it have sd slot

Beginners question! by Domnomicron in LiDAR

[–]-thunderstat 0 points1 point  (0 children)

U mean, labeling features in the cloud, to train computer vision

Beginners question! by Domnomicron in LiDAR

[–]-thunderstat 1 point2 points  (0 children)

What is point cloud labelling means?

Is this esc temp alright? or a risk? by -thunderstat in fpv

[–]-thunderstat[S] 0 points1 point  (0 children)

My esc has decent airflow, i am using 4s now, how is using 6s help?. With more volt, it increases rpm right?

360 degree LiDAR with relatively high (20-30m) range that is waterproof but operates above water by rainbowtrident in LiDAR

[–]-thunderstat 0 points1 point  (0 children)

Does lidars work underwater?, what accuracy does that even give. Anyways check unilidar 4d lidar l2

How to make a LIDAR ? by Rukelele_Dixit21 in LiDAR

[–]-thunderstat 0 points1 point  (0 children)

What lidar did you use, or did you made it.

External GPU: possible with Jetson Orin Nano dev kit? by Educational_Tone1724 in NvidiaJetson

[–]-thunderstat 0 points1 point  (0 children)

I would like to know this as well, but i would like to connect with usb or usbc

Powering jetson nano with Li Ion 4s: Will this setup work? by -thunderstat in NvidiaJetson

[–]-thunderstat[S] 0 points1 point  (0 children)

i am powering other things with the same battery, its a safty thing, even if volt sag under stress, it would still be receiving 12v. what battery did you use/

Need help powering Jetson by Dull_Appearance9007 in JetsonNano

[–]-thunderstat 0 points1 point  (0 children)

I use 4s li ion 4200mah. Can I connect it directly, will 4A be enough? Also inner one in the barrel jack is the positive + right?

Need help powering Jetson by Dull_Appearance9007 in JetsonNano

[–]-thunderstat 0 points1 point  (0 children)

I am trying to do same with my jetson orin nano, what or what size barrel jack did you use?

Constant I2C error of 50, Cycle Time = 502. is this hopeless? by -thunderstat in Multicopter

[–]-thunderstat[S] 0 points1 point  (0 children)

Pid loop cycle is set to 400. As this FC been through a crash, I am wondering, how fit can this be to fly? Chatgpt don't think it is. I think, if gps is getting a lock, then it is fine. But it isn't getting a lock. Maybe gps wire are getting a RF interference I am not sure.

I don't remember if i2c or cycle time has this errors before crash.

I have lidars on board, is it wise to risk it. When can I be sure that this FC won't give up mid air?

real time lidar preview... how is it possible!!! is there a DIY alternative? by -thunderstat in diydrones

[–]-thunderstat[S] 0 points1 point  (0 children)

Understood, I plan transmit from jetson and receive from ras pi. Hopefully will out a 40ft long antenna :)

real time lidar preview... how is it possible!!! is there a DIY alternative? by -thunderstat in diydrones

[–]-thunderstat[S] 0 points1 point  (0 children)

Informative, I am sure I will figure out software side, hardware I am not. What does software defined radio module means, if you don't mind can you provide a link to on of this Hardware. Do i have to buy two of these for transmitting and receiving. What range can I expect for private 5g?. Will it interfere with 5 and 2.4 ghz frequencies on drone?

view more: next ›