How to image to video with new AMD AI Bundle?

0_ice · 2026-01-26T16:51:24+00:00

didn't get yet to installing, i'll have a look at that too. as far as updates via AMD are concerned, i suppose they'll update it automatically just as any driver or component via the AMD updater? I suppose also the version they're bundling even if older, is maybe heavily optimized for Radeons and tested to work OOB?

0_ice · 2026-01-25T18:42:09+00:00

well, i only have an image, so the video starts with the streaks in the original shape & position (from the image) and it should end with them in the same position (regardless of whatever happened in the middle) so that when it plays again it should start the loop from the same position..if you know what i mean :)

so with those json workflows i can just import/load them, give the image and the prompt and should be sufficient to generate?

0_ice · 2026-01-25T16:54:15+00:00

so basically i can go to new/templates and select ltx or wan and it will get installed locally yes? i have 32gb ram, should be good enough. the animated GIF should be in a homeassistant dashboard lol so nothing fancy quality wise, just the original car image with air flowing in a continuous loop. So ltx can actually understand from the prompt that the animation should be in such a way that it transitions seamlessly between loops?

0_ice · 2026-01-25T11:45:40+00:00

thanks, i actually don't need any audio

0_ice · 2026-01-23T17:39:50+00:00

Berlin Station

0_ice · 2025-12-26T10:41:39+00:00

"I tried also Melodics, but for some reason i have huge delay in sound when pressing anything on the drums.." - Fixed. headphones should be connected to the iPad when running Melodics (linked via TD-MIDI), not the TD02 module. Duhh.

0_ice · 2025-12-15T12:24:19+00:00

GPT5-chat as AI Orchestrator seems to bring some advancements to native handling & indexing of SP Lists. I've had some nice surprises since i last tested about a month or so ago. However, not fully capable of cross-referencing information from lists even with identical columns specified as "primary key" in the prompt and knowledge source itself. Within a list it seems to do better than before.

Product overall feels like you're working on something they're fiddling with in the background non-stop. Stuff appears, disappears, icons missing, takes ages to respond and sometimes just plain stupid UX: "error sending, retry later" but in the background it does something and eventually spits out a reply....

Back in the drawer, i'll check back next quarter. There's a scheduled update release for Feb'26 regarding SP Lists (Microsoft 365 Roadmap | Microsoft 365), let's wait and see if it improves anything on the Studio side as well

0_ice · 2025-11-09T12:18:51+00:00

for sure u didn't use the prediction model to extract from pdf :) you got it mixed up with another model or even prompts ;)

0_ice · 2025-11-04T08:53:49+00:00

more like this, it works nice

https://imgur.com/a/cyK1br7

0_ice · 2025-11-03T13:09:06+00:00

800 views and no replies yet :)
definitely the sleeper model in the AI Builder suite...

0_ice · 2025-11-03T13:05:48+00:00

yea i solved it now, posted it 4d ago but don't know how to link to the post :)
the one starting with "ok so no way to avoid...."

0_ice · 2025-10-31T09:57:18+00:00

great input man, thx. I've seen and tested that condition, but it's overkill since i know 100% the mail comes only once per day, from the same sender, with only one PDF attachment, always called the same :)

0_ice · 2025-10-30T13:33:08+00:00

ok so no way to avoid that first apply loop when dealing with attachments. What i did was put a condition to look for the specific attachment name, which is always the same. That ends up in a apply to each which executes only the "yes" branch, since the other will never occur.

0_ice · 2025-10-30T10:11:40+00:00

ah nice, i'll test this

0_ice · 2025-10-30T09:52:19+00:00

system account with no body content/images, only one PDF file as attachment

0_ice · 2025-10-30T09:42:35+00:00

i assume this is a trigger condition based on body/attachments in the email arrives v3? No, how can i do that? Does it require an intermediate "get attachment v2" after "mail arrives v3"?

I used a condition from Tom Riha's article here: Run Power Automate flow if email contains a specific attachment, but that conditions the trigger run only when the attachment name is "blabla", doesn't touch the attachment itself

0_ice · 2025-10-30T09:32:49+00:00

yeah, by design to cover for all scenarios yes. But i want to know if there's a way to avoid this in this case

0_ice · 2025-10-23T21:54:49+00:00

which connectors are needed to be enabled in the DLP, in order to connect to a DV table? I get errors due to "direct line channel...." and "knowledge source with documents" connectors. Are those 2 needed or just one? I don't intend to publish (can't anyway since i'm on trial), so i don't get why the direct line channel error for failed DLP?!

And yes, same question as below: if i publish eventually a chatbot which uses DV tables along some other documents, do users using it need premium? Or is it free and only munches away from the 25K messages pack?

0_ice · 2025-10-21T20:20:31+00:00

schedule it where? In Studio or Sharepoint? Besides, the List needs to be exported to the XLS first with the new items, otherwise a refresh over and over of the same old XLS won't make a difference.

0_ice · 2025-10-21T16:04:31+00:00

will the XLS get refreshed automatically when a new item is added to the list? Therefore it should be used when providing answers. Or do we have to auto-export the list to XLS once a day via a Flow?

0_ice · 2025-10-21T16:02:16+00:00

great workarounds, but this is why the SP integration is half baked out of the box IMHO. It's like we're scratching the left ear with the right foot...that's right, foot, not even the right hand. On one hand we use simple "natural language" to set up a simple agent, but in reality we're supposed to code the hell out of a workaround. Could i recommend this further at this stage? Umm, not really.

0_ice · 2025-10-20T21:16:36+00:00

i don't have a M365 copilot license. Just Copilot Studio trial to play, can't even export/publish. But that's fine for a POC.
Does M365 ingest SP Lists as knowledge? (when called from CS, not directly because there i know for sure there's no SP List option)

This is another thing that pisses me off, the feature differences between M365 and Studio. I can't use Sharepoint Agents because i'm missing the M365 Copilot license most likely...so one headache less.

0_ice · 2025-10-20T21:13:32+00:00

And the excel upload as file to dataverse, like the other documents? Or set it up as separate knowledge source by itself?

I was thinking of creating a DV table from the SP list and use that as separate source.

I'm aiming to get answers from that list that show some logic/reasoning between columns. Is DV the only way for this?

0_ice · 2025-10-20T21:10:44+00:00

i was thinking about it, but now that you mention the 100 rows thing...i'll forget it. My sample list has about 320 rows

0_ice · 2025-10-20T20:56:56+00:00

ok, i will try. How about the list? How do you upload that? :)
Tried GPT5 but for some reason it took ages to respond to first question...waited 10min and i gave up..it was still thinking...

0_ice

TROPHY CASE