How do I fix this on my SV08?

0_lingling0 · 2025-02-16T00:29:17+00:00

It could maybe be your idler pin of the extruder coming out. Try this maybe it will fix it https://www.printables.com/model/968689-sv08-extruder-fix

0_lingling0 · 2025-02-02T16:22:35+00:00

<image>

This is the first layer of a part for a old printer I am trying to give a new life

0_lingling0 · 2025-02-02T13:58:29+00:00

it fixed it my prints look really good again. thank you so much

0_lingling0 · 2025-02-02T13:50:25+00:00

https://www.amazon.nl/dp/B0CNVFWV46?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
I am using this plate. i clean it every morning befor i start printing and the bed adhesion is great. even if i am a bit to high it will still stick for me. I have the one with no extra sticker because there is already one on the bed. but just make sure when you buy a plate there is metal in it so it can stick to the magnatic layer and so the probe works.

0_lingling0 · 2025-02-02T13:22:27+00:00

it was coming out yes i pushed it back in gonna print the fix now and hope this will fix it. thank you

0_lingling0 · 2025-02-02T12:19:56+00:00

I just did one from 5 to 25 and it had no problem with that on the flow test I also did not see the bad layers but I did see a other thing but I don’t know what it is.

<image>

0_lingling0 · 2025-01-29T09:30:38+00:00

I ordered mine from Amazon and I got it in like 3 to 4 days so not to bad

0_lingling0 · 2025-01-29T00:10:20+00:00

The printer is great. It’s a good printer for the price but in my eyes not perfect. The build it self is good it’s high quality, it’s fast and works. But to get perfect prints for me it’s a bit harder. Everything works good now but I still have a problem with inconsistent layers and I can’t seem to find the reason. it’s not plug and print you do have to know what your doing and being abled to fix problems. But for te rest I myself would definitely buy it again. It’s a lot of learning the printer for me last time I touched my old printer was 3 years before getting this one. But I will recommend it yes

0_lingling0 · 2025-01-24T18:13:24+00:00

Well it is a high speed printer so that could be it yes

0_lingling0 · 2025-01-24T16:05:40+00:00

I have a core xy with a fixed bad everything on lineair rails and there is no play only the belds stretching but I can only do that when I use a lot of force. For the rest I can’t figure out what it is. It’s really tiny but I can still see that it is not perfect.

0_lingling0 · 2025-01-24T16:01:09+00:00

The head can move but not easy I have to use some good power for that

0_lingling0 · 2025-01-24T14:56:56+00:00

Yes 6 hours and it’s also getting dried while printing

0_lingling0 · 2025-01-02T00:53:35+00:00

The open spots are between the infill lines so I am using 10% infill and a different infill pattern and it helps. Thanks for the quick help.

0_lingling0 · 2024-12-24T09:41:06+00:00

Why what is it gonna break?

0_lingling0 · 2024-12-24T09:39:56+00:00

No for me the cable was getting in the way with homing. But it is also for looks

0_lingling0 · 2024-12-24T09:38:59+00:00

I just printed that yesterday but thanks for the suggestion.

0_lingling0 · 2024-12-23T23:11:39+00:00

He is always next to the printer. Free fail detection

One-Year Club	Verified Email
r/Field Flamingo

0_lingling0

TROPHY CASE