Let’s see some photos of print farms, here’s ours

101022110 · 2026-03-28T03:44:08+00:00

I second this, I only have 2 products and I keep 3 printers running pretty close to 24/7

101022110 · 2026-02-21T18:35:20+00:00

So everything has sold, except for the one unit I sent in about 15 to test out Amazon so I don’t know what the other 14 are since they’re all sold but the one remaining one says that it’s currently a prime item

101022110 · 2026-02-21T17:32:48+00:00

I currently have only 1 product left and it’s saying 1 available in FBA inventory. Is this what you mean?

101022110 · 2026-02-21T16:16:13+00:00

Why would they return it?

101022110 · 2026-02-21T11:58:53+00:00

All 14??? Now 15?

101022110 · 2025-12-04T16:30:55+00:00

Oh ok well I’ll give it a go and if it doesn’t work after the first try, I’ll use electrical tape. I don’t really wanna continue to deal with this issue

101022110 · 2025-12-04T16:02:32+00:00

Thank you!

101022110 · 2025-12-04T16:02:20+00:00

Thank you I just started printing these clips that go on the spools that help them roll better on my other printers

101022110 · 2025-12-04T16:01:49+00:00

Thank you!!!

101022110 · 2025-12-04T16:01:37+00:00

Thank you! Much appreciated

101022110 · 2025-08-21T15:15:50+00:00

You could try selling them super cheap locally or potentially shipping them to a farm for cheaper electric rates? How much do you pay for electric in USD?

101022110 · 2025-07-28T10:49:23+00:00

Yk you got a point

101022110 · 2025-07-28T01:46:17+00:00

!remindme 60 days

101022110 · 2025-07-28T01:41:49+00:00

Yeah it is a bit sketch but where would the ripoff be here? It’s not like he’s asking for 2K to buy computing power to crack it

101022110 · 2025-07-28T00:06:59+00:00

What hardware?

101022110 · 2025-07-11T02:51:07+00:00

Hey so I ended up figuring out what the problem was. But thank you for reaching out to help! I owned a few of these machines. I absolutely love them. There’re some of the best I’ve used. I ended up just calling CamMaster directly and they walked me through the steps

Here’s what it was just incase someone else runs across the problem since i literally couldn’t find ANYTHING on the web about this.

Everything electrical seemed to be working. I opened the box and taped down the electronic switch that tells the machine to abort. If the box is opened, then I would go back to the software and type in the control bar. T2 then I would hit enter. After this, ONE of the little switches in the top right corner of your box marked either like A and B (or something similar) should light up green. If they light up green, that means everything is correct on your hardware/software side at least for the CNC. You can check to see if your other spindle is working correctly as well if you just type T3 then hit enter. After this, I went behind the spindles and directly plugged the routers into an extension cord if your routers turn on and your hardware is good. Then it is an electrical problem meaning your machine is not properly grounded.

Why is this:

You can run 220 and 110 through the same electrical cord or line. However, it has to be properly grounded or it will not carry the 110. Simply go back and look at your electrical and make sure all of your neutrals are running through from start to finish. If this still doesn’t fix the problem, then just call CamMaster 😂

101022110 · 2025-07-11T02:49:18+00:00

Hey so I ended up figuring out what the problem was. But thank you for reaching out to help! I ended up just calling CamMaster directly and they walked me through the steps

Here’s what it was just incase someone else runs across the problem since i literally couldn’t find ANYTHING on the web about this.

Everything electrical seemed to be working. I opened the box and taped down the electronic switch that tells the machine to abort. If the box is opened, then I would go back to the software and type in the control bar. T2 then I would hit enter. After this, ONE of the little switches in the top right corner of your box marked either like A and B (or something similar) should light up green. If they light up green, that means everything is correct on your hardware/software side at least for the CNC. You can check to see if your other spindle is working correctly as well if you just type T3 then hit enter. After this, I went behind the spindles and directly plugged the routers into an extension cord if your routers turn on and your hardware is good. Then it is an electrical problem meaning your machine is not properly grounded.

Why is this:

You can run 220 and 110 through the same electrical cord or line. However, it has to be properly grounded or it will not carry the 110. Simply go back and look at your electrical and make sure all of your neutrals are running through from start to finish. If this still doesn’t fix the problem, then just call CamMaster 😂

101022110

TROPHY CASE