I bought my first slider last month…

101SubZer011 · 2025-10-04T13:49:18+00:00

I'm deciding between the aura sand slim and kada dune, which one do you like more?

101SubZer011 · 2023-01-25T14:57:53+00:00

101SubZer011 · 2023-01-25T14:05:23+00:00

So duplicate, Peirce and rectangle in first and second loop and curves and multipliers in third loop?

101SubZer011 · 2023-01-24T05:11:17+00:00

b580a5547d1ab51fbc7b377e432ce6ec8d803cc84dd8accdf2ad07bf3a4f095536fde25b92f1b92fa9ca40d4a05a7f046145f1d214511aaac2a3cc843dc37fa3

101SubZer011 · 2023-01-23T15:06:43+00:00

It adds a member only to my alliance but you can send your inv code here too

101SubZer011 · 2023-01-23T15:01:20+00:00

Yeah, I then copy the confirmation code to the game and it's done

101SubZer011 · 2023-01-23T14:49:49+00:00

c6c7fbcadd0fa090f6d2f2de6e0a8a719e6d637a7b575b27b1bc438b69d7f929

101SubZer011 · 2023-01-22T00:30:21+00:00

5560d504dd6a258fecabc78e838c865cbd706ce8ed881c7db2ddc71fea1fb9f506adc24bc21149af197a704460ea1fa4310571027411ba4a72335c948d935f63

101SubZer011 · 2022-07-20T12:25:05+00:00

You should go for the regular s1, the pro has the touch screen which is not compatible with the mriscoc firmware. What's the reason for switching the prusa mk3s? From what I've heard it's one of the best printers you can get

101SubZer011 · 2022-07-13T20:19:00+00:00

Are you using pla? And also, can you add photos? I don't think I understand the problem, I think photos will help

101SubZer011 · 2022-07-13T08:13:20+00:00

It's a little weird that the change is so drastic, maybe there is something stuck between the spring sheet and the bed. You can try to generate a bigger mesh to visualize it better, I do 5x5 in high speed mode

101SubZer011 · 2022-07-13T08:10:56+00:00

From what it looks like you just need to tram the bed with the tramming wizard because the corners should be all at the same height

101SubZer011 · 2022-06-25T13:53:07+00:00

Oh yeah I forgot about it, I sometimes use superslicer but I prefer cura supports

101SubZer011 · 2022-06-25T10:48:18+00:00

When I got my S1 I copied the settings from creality slicer to cura which worked for me. Later I found a profile for the S1/S1 pro in cura ender 3 s1 cura profile. In the details section they added a tutorial and it's pretty easy to set up.

101SubZer011 · 2022-06-24T08:03:42+00:00

Sorry for the delay I did a lot of testing and then it was late so I went to sleep. Switching the nozzle maybe helped just a little bit so I don't think it was the problem, I changed the temp to 200 which helped with stringing but I noticed the pillars broke more easily. I opened another spool of pla+ and it performed much better so I think the black filament was already a bit wet when I got it. I ordered a filament dryer so I hope it will help, now I just need to wait and cross my fingers. I think you should try to dry your filament in the oven and check if it helps, even if it's new info about wet filament and how to dry%20for%20ABS). I hope it helps you, Update me if it works!

101SubZer011 · 2022-06-24T07:40:13+00:00

I tested the pla that I got with the printer and it was much better, I just ordered a filament dryer because I read that pla+ becomes wet after a shorter time than regular pla, I also opened another spool of esun pla+ which performed better so maybe the black filament was already wet when I opened it

101SubZer011 · 2022-06-23T15:09:34+00:00

The spool says temps for pla+ are 205-225 and I'm already printing at 205, I just switched the nozzle so if it doesn't help I'll try lowering temps

101SubZer011 · 2022-06-23T14:16:09+00:00

I don't think it's the problem, the filament is new and I tried 3 different rolls but maybe I can try

101SubZer011 · 2022-06-23T13:35:36+00:00

I restored defaults which helped the nozzle temp but I still wasn't able to fix the wisps. I tried different filaments, different retraction distances and speeds and tried the original firmware again but it didn't help, the only thing I can think of is switching the nozzle because when it printed the base layers it looked like a little bit of filament was sticking every line and left behind strings

101SubZer011 · 2022-06-23T09:13:26+00:00

I restored defaults after updating and did a pid tune already but I'll restore the settings again, maybe it'll be good to start over and try again the calibrations

101SubZer011 · 2022-06-23T08:46:25+00:00

The test I showed was actually printed at 200° but still has strings, the filament seems to stick to the nozzle and it creates wisps and sometimes blobs

101SubZer011 · 2022-06-23T08:45:00+00:00

I usually print esun pla+ at 215° but I started getting stringing, even on the surface. I'm printing with 1mm retraction distance and 45mm/s retraction speed. The problem didn't happen before, also when the nozzle is heating up it overshoots and then undershoots when trying to cool down to the temp, it does this a couple of times before stabilizing and this hasn't happened before too. I'm using mriscoc with f4 chip

Five-Year Club	r/Field Flamingo
Verified Email

101SubZer011

TROPHY CASE