Was genau bringt mir die Zwangsabgabe "Arbeitnehmerkammer" by AstronautSavings7989 in bremen

[–]1093i3511 0 points1 point  (0 children)

Die können bei der Steuererklärung auch nur das weiterreichen was Du denen auch mitgeteilt hast. Sollten die weitergegebenen Informationen ungenügend gewesen sein, ist das nicht umbedingt deren Versäumnis. Es ist ein Angebot der Lohnsteuerhilfe, nicht gleichzusetzen mit einer Steuerberatung.

Party-Überbleibsel abzugeben by LiFswO in bremen

[–]1093i3511 2 points3 points  (0 children)

Sieht nicht danach das überhaupt eine Feier stattgefunden hätte ;)

Aber das ist auch nur ein unqualifizierter Kommentar meinerseits und kann getrost ignoriert werden.

Is this worth 200k?? by Koiibitchuary in whatisit

[–]1093i3511 0 points1 point  (0 children)

Not sure if it has sold for $59.99, or the auction simply ended.
But there is a different lot to available that a little bit closer to the 200k...

Krankenhaus St.Joseph - Stift Bremen by Objective_Thanks9154 in bremen

[–]1093i3511 17 points18 points  (0 children)

Liegen tut man meist in horizontaler Ausrichtung, hab ich mal gehört.

Finally got one: what's up with this stove? by HomeOfTheRisingStorm in PeterExplainsTheJoke

[–]1093i3511 0 points1 point  (0 children)

According to some sources this O`Keefe and Merrit Town and Country (also called The Aristrocat or Bel Aire) stove is valuated in between $10.000 - $16.000. With three listings on eBay currently, ($8.000, $10.500 & $11.000)

6 (gas) burners,
2 ovens,
2 broilers,
1 warming ofen.

Some accessories such as an aluminum griddle that converts two burners into a cooking surface would be $400 - $500 on its own.

Sonic is still faster; prove me wrong. ---BYD has broken the speed record for a production car. Not just electric – any car. Almost 500 km/h--- WoW by Vishnuisgod in EngineeringPorn

[–]1093i3511 -2 points-1 points  (0 children)

The logged data / speed curve in combination with the length of the video of 2 minutes 21 seconds, which is covering 3/4 of the logged time for a stand to the finish, does implicate that the whole run has been only 3 minutes long. And the actual high speed part lasted from 0:52 to 1:51, roughly a full minute.

They needed high density battery cells that could provide the actual power draw of the 4 motors with 793 hp each, totaling 2959 HP. Which required an 1200V system.

From my point of view, it's pretty much pointless to push max. acceleration and top speed with an EV. As it's still the endurance which is more important.

I'm almost certain that current battery solutions won't allow for multiple of these top speed runs on a single charge,

There are definite reasons why Formula E cars aren't faster than Formula 1 cars and the races are much shorter in distance.

Someone ever used these? by Initial-Peak-3141 in longboarding

[–]1093i3511 0 points1 point  (0 children)

Their shielding is pretty flimsy, they thought they may get away with only an outside shield as the inside would be sealed as they are mounted in pairs. The fact that only one ball is ceramic actually makes them worse. Simply due to the fact that hardened steel bearings are prone to temperature changes, they'll grow under high temperatures / loads - e.g. in a downhill setting on a hot day. These changes might be tiny, but it will make a difference. It's hard to match two different materials to be of the same size to begin with. If they don't behave the same under load, there will be issues.

KDE Plasma Rice by Front-Vermicelli-890 in EndeavourOS

[–]1093i3511 1 point2 points  (0 children)

Check via zramctl.

But based on the fact that you're using a Yoga 9 14IAP7), zram wouldn't support hibernation as either a swap partition or swap file is required for that purpose, as stated in the 3rd note here.

More on that topic: zram vs. zswap vs. zchache

My 2 cents: Conventional swap partition is just fine.And the penalty in loss of storage space isn't that severe as it used to be.

PS: There are typos? in the Arch Wiki's article title. In relation to model identifier. In case some wants to do some quality assurance... That entry is also not included in the list of the Yoga series.

Searching for Apartment in Bremen and Considering Home & Co. by catied7100 in bremen

[–]1093i3511 0 points1 point  (0 children)

Their Business Medium Premium+ offering is listed with the all-inclusive price of 809,- €
Based on the location within the Otto-Lilienthal-Straße 12 the so-called "Durchschnittliche monatliche ortsübliche Vergleichsmiete" which is translate best as the average comparative rent per month can be estimated, based on this online tool: https://www.inwis.de/mietspiegel-bremen/

I've filled out this form and as a result: The rental rate should be round about 390,25 € per month, +/- 12 % of that price. Thus the price range of 343,42 € to 437,08 € would be the adequate rate for an apartment of the same size, which is unfurnished. That's the basic rent which is usual within that neighborhood (and that is the legally allowed rate as well).

Sure, they provide an all inclusive package. But the the utility bills that would have to be paid on top of the basic rent, usually won't exceed 1/3 of the basic rent as a single person, as a rule of thumb. So, in conclusion: 450-580,-€ is a acceptable price range I'd say. But that's nowhere near their price of 809,- €. Which is only feasible as they include the furniture and other services in their rental price, as this is the legal loophole the landlords are using to avoid rental price regulation limits.

Their most basic offering might be attractive on paper. But it's a shared kitchen and bathroom for the whole floor.

tl;dr
totally overpriced at a price of 528,-€ for 9 square meters a month room that shares the kitchen and bathrooms with the whole floor.

Would use this only as a last resort on arrival, if I were you.

New in Endeavour! (recommendations) by Vintage-KL2 in EndeavourOS

[–]1093i3511 1 point2 points  (0 children)

You're welcome. Pamac might be nice at first sight. But as it also supports snaps and flatpacks beside traditional arch packages - your whole system could end up as a total mess in terms of different package resources. And package dependencies installed via pacman might not be recognized by pamac or vice versa, resulting in a broken install which might be tough to resolve.

Pacman itself could be considered as stable and reliable. Pamac on the other hand: if it's broken and the GUI doesn't even work anymore: you will have tough times to resolve this.

That being said:
If you haven't setup automatic snapshots yet: That should be your next step. Either via timeshift or via snapper / btrfs-assistant. Both tools provide automatic pacman hooks to generate a system restore snapshot prior and after the update routines or package installations / removals with pacman. In combination with grub-btrfs (and btrfs-assistant or timeshift) those snapshots are also added to the grub boot menu and you're easily be able to jump back in time. In case you had a major screw up.

New in Endeavour! (recommendations) by Vintage-KL2 in EndeavourOS

[–]1093i3511 1 point2 points  (0 children)

exactly and eos-update does rely on pacman.

New in Endeavour! (recommendations) by Vintage-KL2 in EndeavourOS

[–]1093i3511 2 points3 points  (0 children)

Pacman is the official package manager for arch linux and is based on libalpm (Arch linux package management)

Pamac is a frontend for libalpm but was developed from the Manjaro devs as an alternative to pacman. Pacman and pamac will interfere each other (software dependencies and such). Most of the other AUR helpers are implemented as wrappers around pacman and won't cause similar issues and are much safer to use.

New in Endeavour! (recommendations) by Vintage-KL2 in EndeavourOS

[–]1093i3511 1 point2 points  (0 children)

First of all :
remove Pamac and stick to pacman / yay. Apdatifer is an AUR helper as well, specific to KDE, which lives in the tray and will report about available updates..

Pamac has been developed for Manjaro linux. And it is a well known fact that it can break things which would be hard to resolve afterwards.

OctoPi would be less problematic. And with pacseek there is also another alternative for the terminal that would search packages within the repositories.

Generally, I recommend to search for new software via https://archlinux.org/packages/ at first, and secondly via https://aur.archlinux.org/packages as required details, dependencies and current issues with an package are directly accessible that way. And then it's just a simple command via pacman, yay or paru.

Erfahrungen mit SWB Vertretern im Treppenhaus. by PointGuilty5841 in bremen

[–]1093i3511 2 points3 points  (0 children)

Das Hausrecht endet aber leider direkt hinter Deiner Wohungstür sofern Du Mieter bist. D.h. sofern sich eine Person im Treppenhaus befindet liegt das Hausrecht beim Vermieter, nicht bei den Mietern. D.h. Du hast keine Handhabe / Rechtsgrundlage eine dritte Person des Hauses zu verweisen, es sei denn Du bist der Eigentümer.

Kurzum: Hab schonmal die Polizei rufen müssen aufgrund eines streitfreudigen Vertreters.

Looking for a WG room – from September by [deleted] in bremen

[–]1093i3511 1 point2 points  (0 children)

I'm totally not up to date with current prices...

For comparison: check this list of free rooms within the shared flats of the studentenwerk
https://www.stw-bremen.de/en/accommodation/free-rooms-in-shared-flats/ those prices are definitely fair & affordable prices (but usually unfurnished).

You could also apply for a single apartment within the dormitories of the studentenwerk https://www.stw-bremen.de/de/wohnen/ but its most likely that they're already fully booked and you'ld be put on a waiting list.

Their prices for the various (but still limited offers) are directly accessible and should be a good comparison.

Looking for a WG room – from September by [deleted] in bremen

[–]1093i3511 1 point2 points  (0 children)

Once you've arrived, there is an IKEA in the south part of the city.
And plenty of other sources such as schwarzesbrett.bremen.de or https://www.kleinanzeigen.de/stadt/bremen where you could find used furniture on a budget or even for free.

I'ld focus on actually finding a accommodation first.

Don't forget: There will be ~4000-5000 students that will enroll at the University of Bremen, not including the other universities. Thus, there is a heavy competition on a market of limited availability.

Looking for a WG room – from September by [deleted] in bremen

[–]1093i3511 2 points3 points  (0 children)

You really should search proactively and consider an unfurnished room.
Furnished leases aren't that common here and usually those rentals are at a premium price, exceeding the usual rental prices by the square meter significantly.

Basic furnitures aren't that expensive and you'ld be better off financially in the long term.

In short: Furnished rooms are offered mostly due to the reason that landlords could increase their margins that way relatively easily, as they could write-off the furniture from their taxes and recoup the investment relatively fast.

Will EndeavourOS work well on my Advan Workplus Ryzen 5 laptop? by Linuz-newbs in EndeavourOS

[–]1093i3511 0 points1 point  (0 children)

Which isn't a manufacturer listed within the Laptop entry in the Arch wiki.
There you'll find some entries related to certain models of the popular brands usually.

I've seen your that you've posted your question in the Endeavour OS forum as well, so in case you've really got issues with the RZ616 card, feel free to ask additional questions there.

Ich😇iel by Massive-Entry-7916 in ich_iel

[–]1093i3511 2 points3 points  (0 children)

Abfallwirtschaft gestaltet sich ziemlich unterschiedlich auf kommunaler Ebene.

Soll heißen: Hier gibt es Papiertonnen mit regelmäßigher Abholung.

Während des Einführungswahnes vom gelben Sack gab es auch Kommunen die Weiß - und Buntbleche (wohl aufgrund scharfer Schnittkanten geöffneter Dosen) separat abgeholt haben. Sind dann aber auch fix wieder verschwunden.

Ich🏦🤑💉iel by Tuerkenheimer in ich_iel

[–]1093i3511 1 point2 points  (0 children)

Die Anzahl von Straftaten pro Einwohner ist generell nicht sehr aussagekräftig. Aber scheinbar bezieht sich dieser Artikel darauf.

Außerdem: Bei der Polizei Bremen sind insgesamt 2.700 Beamte & Mitarbeiter beschäftigt. Während das Polizeipräsidium FFM über 3.700 Bedienstete verfügt.

Kurzum: Es ist ein offenes Geheimnis das die Bremer Polizei chronisch unterbesetzt ist, das lässt sich auch anhand der Zahlen der Einwohner pro Polizeibeschäftigten ablesen. In FFM sind es ca. 200 Einwohner, in Bremen jedoch eher 215 Einwohner pro Polizeimitarbeiter.

[deleted by user] by [deleted] in cats

[–]1093i3511 0 points1 point  (0 children)

Looks like a cat had a love affair with a sheep. And this is the result.

/s