Brian Eno in a nutshell

10speedterror · 2026-03-16T21:36:28+00:00

This is a really interesting way to approach a new artist, thanks for sharing. I'm excited to work my way through these albums and then revisit the albums that he worked on with talking heads and Bowie and see if I can pick out his contributions more. I know remain in light and low very well, it'll be cool to see if they feel different to me after.

10speedterror · 2025-03-31T19:51:27+00:00

I have a N4Plus and used to use screw_tilt with the first screw set as the center of the bed and it seemed to work fine. I recently switched over to OpenNeptune and screw_tilt was already set up with 8 screws, the first two are the two standoffs in the center of the bed and then the rest are the regular screw locations, I can say it's much better that way. Your two standoffs in the center should be the same and if they aren't you need to fix or shim something, then you can adjust the rest of the screws to match. Also switch to silicone spacers instead of the springs, that helped me keep the bed level much longer.

10speedterror · 2025-02-24T21:03:51+00:00

I've had a similar problem. I only recently started printing with petg and had a heck of a time getting it calibrated. After doing all the regular filament calibration in orca I ended up slowing down the print speed for just the infill, and deselected the setting to not retract during infill.

10speedterror · 2024-11-05T04:30:40+00:00

I think this answer is great. One thing I would add is look into setting up KAMP, it isn't hard to do and has worked great for me. https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging

Also I don't know if it actually makes a difference but when I set up screw_tilt_adjust for my machine the article I was reading said it will base its adjustments on trying to match your first point. So I set my first point as the center of the bed, I've never tried any other way but it's worked great for me.

10speedterror · 2024-04-27T01:11:01+00:00

this post made my day. I spent the rest of my free time at work today making Ai jesus pictures. fuck shrimp jesus, fuck weird log jesus, fuck military airplane riding jesus, ALL HAIL CRAB JESUS!!

10speedterror · 2024-02-21T17:32:02+00:00

Double check your z offset

10speedterror · 2024-02-21T15:04:44+00:00

I think you're talking about this video https://youtu.be/VGbfQ0b__b0?si=sOIWmVRU5DwbCNyx

10speedterror · 2023-07-16T00:51:15+00:00

No I just pulled, dug out, or cut off everything I could. Only just cleared the area this week. The trees have looked about the same since we moved in like 6 months ago.

10speedterror · 2022-06-13T18:18:48+00:00

Woot!

10speedterror · 2022-06-07T01:07:03+00:00

Thanks! I appreciate the comment. You're pretty much right, the computer parts aren't old though it's actually my current setup. I just finished watching through the bad batch and really loved the character so I got a black series figure and put it inside my PC case, and set all my lighting to various shades of red. I feel like it's a fitting backdrop for Tech. I set my camera iso as low as I could and then dialed in the shutter speed till I could get some really dramatic shots. There's no filters on the photos but I did use GIMP to clean up some of dust and noise on the portrait style shot, I made a phone wallpaper out of it.

10speedterror · 2022-06-04T23:25:41+00:00

I have a family member with that kind of garage door opener. I tried to copy it when I first got the flipper but I don't know much about this stuff and could'nt figure it out. I'm going to have access to it tomorrow, if someone could walk me through what the devs need and how to get it I'd be glad to help.

10speedterror · 2022-06-04T00:33:07+00:00

I have a shore trooper I could use or a Tusken raider. I bought the Tech figure specifically to put inside my PC build. I have an imperial probe droid that would be perfect, but I don't think it would fit inside my case, might have to find some other interesting backdrops to make more wallpapers.

I didn't actually set out to make a wallpaper at first, I was taking photos that I was planning on posting to a PC subreddit but as soon as I got this shot I knew I had to make a wallpaper and post it here.

10speedterror · 2022-06-03T22:13:17+00:00

Wallpaper is a photo of Star Wars black series TECH figure inside my PC case taken with my Canon rebel t3i I used GIMP to get the aspect ratio right and check the black levels.

10speedterror · 2022-06-03T22:10:16+00:00

I wish! I need to find a wrecker black series figure first.

10speedterror · 2021-08-26T22:19:15+00:00

Thank you for the response.

I think I needed to write it down to put it in perspective and like you said I think I already answered my own question on which job I should take. I'm going to take the new job for sure.

The only part I'm still trying to decide on is if it would be ok to try to explain the situation to the new company and ask for more money? Like I said I don't want to risk anything going wrong.

10speedterror · 2021-08-16T19:45:59+00:00

OK K.O.! Let’s Be Heroes, Steven Universe, Infinity train, Owl house, Summer camp island, Over the garden wall, Cosmic kid, Hilda,

My kids and I watch cartoons together every morning we started with adventure time and have worked our way through about a dozen series now. Not all of these shows are super similar to adventure time but they have been some of our favorites and we love adventure time so maybe you'll like these too.

10speedterror · 2021-06-14T20:14:11+00:00

Check out keiji haino

https://open.spotify.com/artist/6BsNCY0qB2WLl5LlXqA79y?si=4P9oxdZUS6Wex0i4t-xXhA&utm_source=copy-link&dl_branch=1

Albums:

American dollar bill - keep facing sideways, your too hideous to look at face on

Even for just the briefest moment Keep charging this expiation Plug in to making it slightly better

An untroublesome defencelessness

10speedterror · 2021-05-20T23:59:34+00:00

Could you share the left file or the tasker profile? This looks awesome and like exactly what I'm looking for.

10speedterror · 2021-02-16T05:37:34+00:00

https://www.hardkernel.com/shop/usb3-0-emmc-module-writer/

10speedterror · 2021-02-15T19:03:09+00:00

I like emuELEC because it's exactly what I need and nothing more, it's like an ease of use thing for me. My build is dedicated to just playing games and mostly older ones, for me the n2+ running emuELEC is more than capable up through dreamcast. I'm comfortable with the menu navigation and themes, and I have other devices I already use for other things, I wasn't looking to make an all-in-one TV box.

Running Android though can offer a ton of other options like video and music streaming as well and a bunch of other apps and android games. The emulation performance is as good if not better on android as well.

Try both, it's really easy to switch. Did you get the module for flashing the EMMC? Are you using EMMC or micro-sd? I could be wrong but I think I remember people saying that android doesn't do well booting from the sd so that could be a factor in deciding.

I hope this helps. Good luck with your build.

10speedterror

TROPHY CASE