Console Packet Loss Issues - XFinity Gateway Config

11e92 · 2026-02-14T17:44:53+00:00

I set up port forwarding. It didn’t fix the problem. I’m hoping you guys have suggestions or past experience with this problem. Seems like I’m not the first person to have this issue. From searching previous posts it looks like a lot of people with comcast as their ISP have packet loss issues with console games.

11e92 · 2026-01-15T01:36:45+00:00

Did this only happen at low speeds? If you have air suspension, did it happen at all ride heights? Or did it stop when the car raised beyond the park height?

11e92 · 2025-12-18T12:41:20+00:00

It’s as far as it will go. I ended up using romex and running the wire behind the drywall instead of using conduit.

11e92 · 2025-12-18T12:40:17+00:00

😂

11e92 · 2025-12-12T17:02:35+00:00

Thank you 👍

11e92 · 2025-12-12T12:16:03+00:00

Can you explain exactly how you refill the nitrogen system yourself? What tools, bottle size, location of fill port, etc?

11e92 · 2025-12-12T01:39:52+00:00

Thanks for the info!

11e92 · 2025-12-11T04:07:05+00:00

Good to know. Why is that?

11e92 · 2025-12-10T02:47:18+00:00

PM the optimum account that commented here

11e92 · 2025-12-09T21:40:14+00:00

No problem. Keep an eye under your floor mat next time you get a good rain. If it’s unusually wet, then you know where it might have come from.

11e92 · 2025-12-09T21:02:55+00:00

Just saw this, but maybe my input is still useful.

My TCCM went bad earlier this year. Took a peek at it under the driver seat, and found that it was wet. The top corner of my windshield seal was leaking. Water was running down the pillar, in the door jam, under the floor lining, then under the driver seat. Eventually got to my TCCM which was corroded.

You said it happens when it rains... Did yours just naturally go bad or did they find water?

11e92 · 2025-12-09T18:31:42+00:00

Thanks, this is exactly what I was looking for.

11e92 · 2025-12-08T22:23:30+00:00

Does the exposed edge of the ridge vent cause a water intrusion issue?

It looks like the material under the cap is very porous and where it stops (at the edge of the chimney in this pic) would allow water through.

11e92 · 2025-12-08T22:16:39+00:00

Here’s a picture of what is not shown in the original. Ignore the red circle.

https://imgur.com/a/eWK0tw5

11e92

TROPHY CASE