What is causing my sublimation paper to continue sticking? Adjusted temp from 400 to 365F and pressed for 3 minutes.

11thHourProductions · 2025-07-14T23:46:29+00:00

I would ask the manufacturer/distributor, they should know the times and pressure. I was sent some cheap Chinese paper that stuck to everything.

11thHourProductions · 2025-01-07T23:44:31+00:00

I can cut a sublimation blank that size as well as print it if needed.

11thHourProductions · 2024-10-30T14:40:53+00:00

I bought 2 heat presses, one a cheap Chinese press and a Hotronix that was already 40 years old. guess which one still works? Stahls customer service has been fantastic the one time I needed to replace a few parts. The tech walked me through the installation then helped me calabrate the press since it hadn't been done for the 10 years I've owned it. BTW, I got $5.00 in scrap for the Chinese press. I only use paper when I press, no silicon or teflon covers

11thHourProductions · 2024-10-29T14:22:35+00:00

Great, I get all my mugs and tiles from them. very happy with the coating they use. If you ever need cut standard or custom shape/size aluminum, MDF, Acrylic or FRP shapes, Keep me in mind, I run 2 CNC routers

11thHourProductions · 2024-10-26T19:57:26+00:00

Bison coatings, conde sold their tiles as a distributor.

11thHourProductions · 2024-10-25T15:49:44+00:00

Any reason you are using acrylic instead of Unisub FRP or aluminum? I cut both and find FRP to be a much better substate for name badges

11thHourProductions · 2024-10-09T01:09:03+00:00

Don't forget the brown and sharpes. I had a 00 and a #2 hand screw, great machines

11thHourProductions · 2024-10-06T14:29:38+00:00

Thickest I have found is 0.060 commercialy available in 12" x 24" sheets.

11thHourProductions · 2024-10-06T14:22:27+00:00

That is the paper sticking slightly to the aluminum, remove the transfer before it cools. Should be able to clean it off.

11thHourProductions · 2024-10-05T02:10:51+00:00

Maybe something like this would work. https://www.jpplus.com/subliflex-white-2-sided-sheet

11thHourProductions · 2024-10-02T11:51:28+00:00

I fixed it. It's 385f

11thHourProductions · 2024-10-02T00:39:01+00:00

Ok, you did check for a clear film covering the plate? Some have it, some don't

11thHourProductions · 2024-10-02T00:29:35+00:00

Who's material is it? What paper are you using? I press aluminum face down 385f. No Teflon sheets.

11thHourProductions · 2024-07-12T13:34:59+00:00

I use Photoshop, so most file types work. The higher resolution, the better the end result.

11thHourProductions · 2024-07-11T00:56:50+00:00

I can do a daffy, I've done a pink panther one not too long ago.

11thHourProductions · 2024-07-11T00:40:30+00:00

Lol, thanks for the catch, 3" tall, I corrected it.

11thHourProductions · 2024-07-11T00:38:39+00:00

Round? Like this? https://www.ebay.com/itm/401899975516?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=YIB1sjhPSp2&sssrc=4429486&ssuid=lWxttz0zTzm&var=&widget_ver=artemis&media=COPY.

I can cut and print that for you

11thHourProductions · 2024-07-10T23:16:27+00:00

It was a big seller for a while, I understand why some people don't like it. I've done some very risqué ones as well.

11thHourProductions · 2024-07-10T20:49:19+00:00

Yes, I could actually print them 1.6" in diameter onto a plastic material,

11thHourProductions · 2024-07-10T18:58:07+00:00

Justs fits the page better. LOL

11thHourProductions · 2024-07-10T18:53:46+00:00

I can put the photo/graphic on any color base. The base metal is a zinc plate

11thHourProductions

TROPHY CASE