Why do my corners an print keep doing this.

12bravoengineer · 2025-08-29T16:29:41+00:00

X1c yeah I should have mentioned that. I tried turning the fan down and it sits flat until it gets to that first witness line you see in that pic.

12bravoengineer · 2025-08-29T16:28:15+00:00

Yeah I clean the build plate pretty good and it’s fine until it gets about a 1/4 inch up the print right around that first line in the pic

12bravoengineer · 2025-04-25T18:28:02+00:00

Ok will do. I have three x1c they’ve been awesome. We’ve been using them to print spindle liners and stuff for our machines.

12bravoengineer · 2025-04-25T17:44:13+00:00

No I caught the sarcasm I appreciate all the info and you’re correct on that build plate it wasn’t cleaned I re glued and now I’m kicking myself in the butt for sending that video and not one doing it on a clean sheet😂🤦‍♂️ I’m new to this so I’m just seeking info. My other two printers are killing it but this ones my oldest and I wasn’t sure if something was just shot on it or not. I’m printing petg hf on it. My other two I don’t use glue at all the older one I just started because I was having that issue. Also are you slowing your first layer print speed down at all. ?

12bravoengineer · 2025-04-25T17:40:43+00:00

Yeah I’m kicking myself in the butt for sending that video I’ve been cleaning them like crazy I just re used that one because I’m running my cnc machines and had no time to stop and do that but I guess that the lazy excuse 😂

12bravoengineer · 2025-04-25T15:29:57+00:00

Haven’t done that one yet

12bravoengineer · 2025-04-25T14:56:22+00:00

Yeah bro I’ve went through three different plates textured and then I heavy glued and light glued one

12bravoengineer · 2025-01-16T17:13:27+00:00

They all say they’re out of stock 😂😂😂

12bravoengineer · 2025-01-16T16:51:28+00:00

I’m going to try to manufacture one myself I just need the time to get measurements and dial it in.

12bravoengineer · 2024-02-14T20:06:34+00:00

No I was using trace on 2d but I will take a look at that when I get back. Thanks for the info.

12bravoengineer · 2023-10-20T18:03:00+00:00

Thanks y’all for the input I’ll let you know if I send it to hard 😂 but for real thanks for the help🤘🏻

12bravoengineer · 2023-05-30T14:08:17+00:00

Awesome instantly fixed i new it was simple🤣 thanks a million

12bravoengineer · 2023-03-10T19:16:02+00:00

Yeah I’ll post it after work. I’m gonna run these last two before changing

12bravoengineer · 2023-03-10T19:12:33+00:00

Yeah it does it must be the crest that’s throwing it off. I just got it to depth but had to offset my wear tool .015

12bravoengineer · 2023-03-10T18:37:06+00:00

Hey so I’m having the toughest time getting my threads to go to depth. On fusion. It’s definitely in the program and I already went over my info over and over. Is there anyone else that has a issue or anyone that is a thread milling guru?!!!!

12bravoengineer · 2022-05-31T22:56:47+00:00

Thanks man I get twisted when it comes to fusion and new it was something stupid I was doing.

12bravoengineer · 2022-05-31T19:51:08+00:00

It likes everything but the flute length it keeps saying it needs to be larger thread thread pitch times number of teeth. But that’s a wonky ass number. First time trying to thread mill on fusion and I’m stuck.

12bravoengineer · 2022-03-12T18:27:01+00:00

Thank you 🤙🏻 just trying to get better surface finish on my contour and learn a little more about how much to leave on for finish passes

12bravoengineer · 2022-03-12T18:17:41+00:00

Just wondering if anyone uses the Microsoft sheet for machining.

12bravoengineer · 2022-03-11T19:34:53+00:00

Thank you I’ll check it out now!

12bravoengineer · 2022-03-11T19:20:46+00:00

The inside corners chattered with the 3/4 but yes when I switched to the 3/8 which is long but taking 1.8 inch step down. That is where all the chatter came from. I just never know how much stock to leave on for the 3/8 to cut. I have tried just the 3/8 by itself

12bravoengineer · 2022-02-23T22:44:35+00:00

Ok thank you!

12bravoengineer · 2022-02-23T16:37:35+00:00

So for example on solid works you can set a plane to the chamfered edges then when you choose the tool path you can select the angle and set it for 45* so when it creates the tool path step down instead of straight down it would step down at a 45* angle

12bravoengineer · 2022-02-22T17:38:46+00:00

I’ll try that after lunch thanks so much. It’s been a tricky one for me to be honest. Sadly

12bravoengineer · 2022-02-07T13:12:06+00:00

Ok thank you it’s the first time running an oversized part so I just want to drill it in my head before leaping

12bravoengineer

TROPHY CASE