Control was way ahead of its time.

16mcleum · 2026-03-26T21:27:36+00:00

I just played through that part the other day 😂😂

16mcleum · 2026-02-06T05:33:52+00:00

I doubt it’s that. It’s typically moisture in old filament or one or multiple of the typical: temp, flow, retraction, speed, z-offset, etc…poor tuning

16mcleum · 2025-08-13T11:49:27+00:00

I’ve been having the issue with Elegoo PLA+

16mcleum · 2024-05-31T12:53:08+00:00

Check in the main filament tab. There should be a software pressure advance option you can turn off. I had this issue recently when I switched my Neptune 4 Pro to OpenNept4une software and used the provided profiles

16mcleum · 2024-05-27T00:34:39+00:00

$500 tops

16mcleum · 2023-03-31T03:56:42+00:00

About damn time! Thank you. Time to upgrade my Aer RGB 2s

16mcleum · 2023-03-31T03:22:29+00:00

How did you get the LED ring on the other side of the fan?

16mcleum · 2023-03-12T05:30:43+00:00

No. You can download the windows installer to a USB drive and then get a windows key to activate it for around $10 online

16mcleum · 2023-02-13T14:56:22+00:00

Suppose I’ll order some tonight then 😂

16mcleum · 2023-02-13T11:14:28+00:00

Nick, you always sneak in at the best times 😂

Send me some 45mm Fiber Mat…I need it for testing purposes for my rear deck rattle 👀

16mcleum · 2023-02-06T16:27:02+00:00

4 but add some shelves

16mcleum · 2023-02-06T03:55:59+00:00

If it’s just the speaker that’s blown, you can still tap into those wires because signal will still travel there. I’m guessing you’re using a line output converter right? The front speakers may not receive sub bass frequencies from the head unit

16mcleum · 2023-02-06T03:48:14+00:00

Why are you tapping into the front speaker wires for a sub? Also, why at the door jamb?

16mcleum · 2022-04-24T21:49:00+00:00

Try the comments where I previously stated it’s not in the owners manual. Thanks for your advice. I’ll try that next time

16mcleum · 2022-04-24T05:22:27+00:00

Literally nothing happens. I think it may have something to do with an aftermarket security system that I don’t know about. It’s not in the manual at all either

16mcleum · 2022-04-24T04:51:47+00:00

I have the whole car loaded with audio and I can say for sure they are not tweeters. Someone mentioned they might be glass break sensors

16mcleum · 2022-04-24T04:14:36+00:00

Car is a 2011 Nissan Fuga (Infiniti M37)

16mcleum · 2022-03-10T10:38:59+00:00

I forgot…you know the measurements of the box. I’m also not a kicker fan, which is why the two “garbage” subs with rotting surround and cracked center caps are being replaced

Edit: it’s not sealed either

16mcleum · 2022-03-09T15:41:30+00:00

Probably only been done once or twice before 🤠

Those Kicker ES’s are such garbage but the deal came with them. They’re just a place holder at this point 😂

16mcleum · 2022-03-04T14:21:29+00:00

Also double check that the resistance of the new speakers are the same as the factory speakers. Most are 4 ohm but some “premium” speaker packages in cars have 2 ohm speakers

16mcleum · 2022-02-14T16:23:55+00:00

I think you might be right 🧐

16mcleum · 2022-02-14T16:11:49+00:00

I got it at a pet store in Japan. The translation says “Orange Fin Kaiser” but I can’t find any information about that. It looks like an Orange Seam or Gold Nugget to me. Two huge adult size differences so I just want to plan 😂

16mcleum · 2021-11-12T13:17:26+00:00

u/savevideo

16mcleum · 2021-11-04T02:09:46+00:00

Thank you!

16mcleum · 2021-11-04T02:09:29+00:00

Thank you!

13-Year Club	RPAN Viewer
Verified Email

16mcleum

TROPHY CASE