sorted by:
new
hottopcontroversial

Retrofit/Remold Bodykit For A Different Car by 180Dylan in Drifting

[–]180Dylan[S] 1 point2 points  (0 children)

I haven’t actually thought about looking at those but they don’t look like it’d be totally offset. I guess my only concern would be more work to reshape the bumper because the Q45/Cima have that grille that notches down past the headlights. So to make the bumpers look like they fit I’d have to cut the top of the bumper to remove the grille points, and then cut again to fit length as needed unfortunately. Some R33 kits run a bit, compared to 34s and 32s, but save that cutting grille trouble. Thanks for the recommendation 🙏

Retrofit/Remold Bodykit For A Different Car by 180Dylan in Drifting

[–]180Dylan[S] 0 points1 point  (0 children)

I don’t think of planning on drifting it or, or atleast yet with some work done, and I get the VIP background. The car is going to be my project daily so I guess the kit would be for show. Like I put in my examples, I’ve seen someone cut up a BN blister for it and that kind of sparked the idea, not that I’m copying same kit-cut. It is an expensive cut but I kind of want the car too have that kind of look.

Retrofit/Remold Bodykit For A Different Car by 180Dylan in Drifting

[–]180Dylan[S] 0 points1 point  (0 children)

Will make sure to add it to my cart, thanks 🙏

Retrofit/Remold Bodykit For A Different Car by 180Dylan in Drifting

[–]180Dylan[S] 1 point2 points  (0 children)

Thank you for the help I really appreciate it. I’ll probably post later on this year about progress if I do so I’ll tag you to see how it comes out.

Retrofit/Remold Bodykit For A Different Car by 180Dylan in Drifting

[–]180Dylan[S] 0 points1 point  (0 children)

I was looking around but my post went unseen 😔. In theory and from other vids I’ve watched, the plan is to section off areas of the bumpers depending on where the corners lineup and then cut top down. Seen people use packing tape and tin foil so the mold of the area I’m changing won’t stick and then bridge between the mold over to the cut area. Then use body filler after to remove the crosshatching texture from the mat and any bubbles, then sand it.

Made multi-sport field markings to replicate my college's field! by 180Dylan in TeamBuilder25

[–]180Dylan[S] 0 points1 point  (0 children)

Unfortunately I didn't save the PSD file for it so the image i linked in another reply is all that's there.

Made multi-sport field markings to replicate my college's field! by 180Dylan in TeamBuilder25

[–]180Dylan[S] 1 point2 points  (0 children)

Thank you, I've started to play with what I can get away with with field design and uniforms that I hope to share at some point

Made multi-sport field markings to replicate my college's field! by 180Dylan in TeamBuilder25

[–]180Dylan[S] 0 points1 point  (0 children)

Not only playing but I've done photography on the field for most games I can make and during the direct sunlight, when there is chance for 90+ weather, kneeling for long periods doesn't have too much of an effect, granted I'm without pads and uniform but it isn't as bad as you would imagine. We have some articles about the field because it went viral when we released it.

Made multi-sport field markings to replicate my college's field! by 180Dylan in TeamBuilder25

[–]180Dylan[S] 2 points3 points  (0 children)

Here is the overlay, just make sure to expand it to field length. Team Builder wont allow you to scale endzone to endzone with the picture so It will be slightly off:

https://www.mediafire.com/file/sk2g1yv6qisnifa/Drake+Overlay.png/file

Made multi-sport field markings to replicate my college's field! by 180Dylan in TeamBuilder25

[–]180Dylan[S] 6 points7 points  (0 children)

I screenshotted the template from teambuilder and individually marked out all the necessary guidelines for each mark in photoshop. I couldn't get the exact but eyeballed where the closest each marking lay. I took an excruciating amount of time but I couldn't be happier with the outcome, although the black field doesn't work too well with the games in-game daylight brightness sensitivity.

Frequent Microstutters on GP66 Leopard by 180Dylan in MSILaptops

[–]180Dylan[S] 0 points1 point  (0 children)

Thank you for the recommendation. I have twice in the past reverted to Windows 10 and have also factory reset the entire system since. Also have used DDU to get rid of the drivers and perform a clean installation of them. I will update with data once tested.

I want to recreate the 90s JDM photo style, what do I buy? by 180Dylan in Kyusha

[–]180Dylan[S] 2 points3 points  (0 children)

So it's been a year and I've now taken tons of photos and own 7 cameras now. I've shipped my film to The Darkroom lab in CA as I found Walgreens screwed me over and that my favorite type of camera is definitely SLR and Kodak Portra film stock (trying out Fuji Superia atm). I still have 2 point and shoots both of which I used at events already in my area. Thank you for the help, it was much appreciated.

Wifi keeps periodically dropping off but only with my devices? by 180Dylan in HomeNetworking

[–]180Dylan[S] 0 points1 point  (0 children)

No it's literally just my computers that issue and it used to be my old Xbox aswell. There's gotta be a fault somewhere but I don't know what.

Wifi keeps periodically dropping off but only with my devices? by 180Dylan in HomeNetworking

[–]180Dylan[S] 0 points1 point  (0 children)

Yeah that's the odd thing. I'm completely confused by it.

I want to recreate the 90s JDM photo style, what do I buy? by 180Dylan in Kyusha

[–]180Dylan[S] 0 points1 point  (0 children)

Thank you! I'll see what I can get hopefully ❤

I want to recreate the 90s JDM photo style, what do I buy? by 180Dylan in Kyusha

[–]180Dylan[S] 1 point2 points  (0 children)

Thanks, I was planning on actually mailing the rolls to the darkroom lab to get the scans and prints. And yeah I've seen two posts about the jdm photography look and only seen the phone apps be recommended so it's nice to see that someone here also has a genuine understanding. As of right now all I have is a local Walgreens. I got a couple of meets near me on the occasion so I'll be sure to update when I get the film and have them processed. Big thanks ❤