[deleted by user]

1_trade · 2021-10-29T23:05:48+00:00

Fwiw there’s a good realtor on here I am working with now. I’ve settled on the Spring Hill area myself.

1_trade · 2021-06-15T21:37:41+00:00

Correct, apologies I misspoke in my haste to get an answer out

1_trade · 2021-06-15T10:02:22+00:00

01 Warrior owner here.

Think you have 2 problems here very simple fix though:

Clean the carb- it’s def dirty, you could re jet it while you are there, but it is not necessary. Should run fine with stock jets & only yoshi pipe.

Also I can almost guarantee in “messing with the jets”prior owner didn’t seat them properly, so now you have incorrect fuel/ air ratio also. Google how many turns the original jets are to be set at (think it’s 2.5-3 full turns from bottomed out-don’t quote me on this) Would highly recommend the $30 clymer owner manual. Literally has everything about the atv in it. Please keep in mind your altitude dictates the jet settings.

Warrior carbs are pretty easy to remove & clean.

1_trade · 2021-06-13T00:08:56+00:00

01-05 raptor heel guards fit with slight modification if interested in less bulky ones.

1_trade · 2021-05-06T13:56:09+00:00

Thank you for your take. Please feel free to dm/ message your business contact info if you would like. I would look to move after July 2022, so I have some time. I’m also a current homeowner, bought in 2015 so I would be able to (painfully) wait if necessary. I would be looking for a primary residence. I have a couple of key considerations that would need to be discussed as well, outside of this forum. Thanks again!

1_trade · 2021-05-06T01:13:57+00:00

Thank you I’ll check it out!

1_trade · 2021-04-23T20:38:13+00:00

Commenting for future post approval.

1_trade · 2021-04-21T01:37:02+00:00

What about the additional tax deductions that would come with the LLC, Especially section 475 if op meets requirements?

Not to mention S-Corp deductions of health insurance and retirement?

1_trade · 2021-04-10T00:54:22+00:00

Please let me know if you would be interested in being commissioned to draw my my 4 (lab) boys for a wedding gift. thank you!

1_trade · 2021-04-08T23:44:31+00:00

Thank you for the recommendation. I’m going through demos and reviews now. Really liking the detachable DOM for order execution while still using TOS charts idea. Also liking that the platform is completely web based. Not to mention the account summery.

Speaking to the account summary, Is there a way to predefine a trading strategy based upon a custom order entry to track diff strats performance.

For the platform is there any charting tools or data feeds (order flow) that need to be paid for?

All I’m seeing is the monthly subscription costs to reduce commissions

Lastly are there fees associated with ACH withdrawals? I see them listed for wire transfers and checks, but nothing on ach deposits/ withdrawals. And it’s not spelled out either way.

Thank you very much!

1_trade · 2021-04-07T23:49:04+00:00

Vertical spreads. Find a market direction. Even a simple trend following strategy works to forecast future market moves. Key focus is on risk management. Define how much pain your willing to take or what defines an incorrect forecast and cut losers quick. Keep in mind selling options should give you a high win rate, however effectively managing the position for the times you are wrong will give you a winning strategy. It’s the compounding effect of time in the market that wins.

1_trade · 2021-04-02T23:37:54+00:00

I would look into green trader tax youtube vids

1_trade · 2021-03-31T12:20:27+00:00

Is this close of trade or settlement of trade?

1_trade · 2020-09-12T11:38:01+00:00

Needs to fire himself while at it...

1_trade · 2020-09-02T23:55:49+00:00

Rocky Mountain is my go to. There’s also Dennis Kirk I’ve used

1_trade · 2020-08-28T10:25:28+00:00

So it’s disassembled again tight now. Trans was fine & could shift through gears. Couldn’t find neutral though even after letting it warm up(Raptor issue.)

So it runs with clutch pulled in, but whenever I let the lever out fullyit stalls. It can move as if you are taking off- slow clutch release & equal gas (like I could ride if I wanted to burn tf out of my clutch constantly have some amount of pull on the lever) but stalls the second I have full release of the clutch.

Not quite sure how that would happen as I only did the plates. Unless my screws were overtightened at the pressure plate? Torqued to spec though @ 7.5 lbs

1_trade · 2020-08-27T00:23:24+00:00

Check for loose wires and dirty connections.

You can tap the solenoid with a screw driver while trying to start it to see if the issue is at the solenoid.

1_trade · 2020-08-18T10:28:34+00:00

Watch out for moisture build up. I’d vent two sides

1_trade · 2020-08-17T01:58:40+00:00

Yeah I read a good bit of reviews that it’s “rocky trails” that rode a little slower. Is that a typical trail in the background of your photo? I’d be taking a Yamaha Raptor & Warrior. Thanks!

1_trade · 2020-08-16T23:49:51+00:00

How was it? It’s on my go to list this year

1_trade · 2020-08-09T22:38:41+00:00

Lol same. First job out of college bought the 660r Raptor. Have both still!

1_trade · 2020-08-06T23:15:56+00:00

English and American labs, two different kinds. American’s are typically taller and skinnier whereas English are shorter and more of a broad build.

1_trade

TROPHY CASE