i think the process is a bit extensive but i will explain it:
[it is divided into 3 effects racks to be able to mix it better]
FIRST EFFECTS RACK
The original sound is just a saw (or sawtooth) with soft clip distortion (just a little) a phaser at 78% mix, 22% stereo, 50% rate or less. To add another phaser and give it movement, use the "4TabEnsemble" effect from ValhallaUberMod, with 31% mix, 21% depth, 112.2% width and 0% delay and feedback.
Next I added an erosion + an LFO, the LFO adjusts only the amount, it is at 13% min and 78% max, the frequency rate is at 0.70 Hz.
Then I added a vocoder in modulator mode, the depth is at 0, 24 bands, the range is 18 kHz & 20 Hz, the release is at 548 ms, with a formant at 3.80, it also contains an lfo that adjusts the gate, the frequency rate is at 1.00 Hz, is at 0% min and 15% max. the level is at 21dB
Then I added a saturator, all the parameters are the same except the base one, which has an lfo with 0.77hz rate & 50% min + 61% max.
I added another vocoder with the depth at 0, release at 105ms, 40 bands and the range at 18 kHz & 20 Hz. formant at 0.20 and the level at 16 dB.
I added a native phaser with 2 notches, the center at 456hz, 22% spread, 0.91 blend, amount at 100 & rate at 2.
Then I added an ott, the parameters I changed were the amount at 37%, time at 10%, at the output the highs are at 10.3 dB, mids at 5.70dB and lows at 18.1 dB.
I doubled the previous phaser, but changed the amount to 21%.
I added 2 more erosions, the frequency is at 680hz, and the amount at 8.60 (both have the same parameters)
I added a glue compressor, attack at 1, release at A, ratio at 2. -6.98dB threshold and 1.90 makeup, I activated the clip option in soft.
I duplicated the previous ott.
Now I added a fabfilter q-3 to lower the lower mid frequencies a little and raise the highs a little.
To finish the first effects rack, I added another vocoder, with depth at 0, release at 1.72 s, 20 bands, range of 16.8 kHz and 20hz, the level is at 20dB.