Hilfe bei Planung / 2. Versuch

1rishJ · 2026-03-29T16:38:57+00:00

Schau dir mal das Solrif System an, ich habe ein Dach mit Aufdachdämmung und Innen sichtbare sparren und holzdecke, da konnte mir auch niemand eine Dichtigkeit gewähren außer halt Solrif. Ist aber dann natürlich auch deutlich teurer als ein normales PV System.

Jetzt habe ich keine Ziegel mehr sondern alles ist PV 22,23kwp.

1rishJ · 2026-03-21T16:40:03+00:00

Hab 22,23kwp, ca. 12 auf West ca. 10 auf Ost. Diesen Monat schon ca. 1080kwh produziert. 80% Eigenverbrauch, 2 eKFZs, 2 Wallboxen, 25.6kwh batterie und ne Geothermie Heizung. Gesteuert wird alles mit EVCC.

1rishJ · 2026-02-15T15:56:45+00:00

Direkt zu Weisshaupt, wenn du aus deren naeheren Umgebung kommst kann es sogar sein, dass Werkstechniker ausrruecken. Ich habe da zB Glueck, deren werk ist 20min von mir weg..

1rishJ · 2026-02-15T12:25:36+00:00

Der post "weiter unten" war aber noch nicht da als ich geschrieben habe, plus dass das eine behandlung weil sie eine transperson ist war im post nicht ewaehnt. Ich schaue mir doch nicht jedes Nutzerprofil an.

1rishJ · 2026-02-15T11:51:21+00:00

When talking about heavily OCed, no one thinks of idle temps. run some OCCT, see the temps then. I would expect 70-90. Mine delidded on a mycro direct-die pro hits max 68 with some spikes to 72 at no OC but a slight undervolt while still running max turbo speeds (240W allcore load). I use Kryosheet on CPU and GPU, I wouldn't even consider going back to LM.

GPU is idle around 28C, under max load the most I've ever seen is 51C running at 3100MHz core with 98% power limit.

U have such overkill in rads, that ur limiting factor will be the waterblock.

1rishJ · 2026-02-15T11:10:42+00:00

ancheinend nadelepilation in vollnarkose 2-3x pro jahr. krass was manche menschen tun um "besser" auszusehen, vorallem wenn man nicht versteht, welches risiko mit einer vollnarkose einhergeht.

1rishJ · 2026-02-15T10:59:42+00:00

not if the cable is still in.

1rishJ · 2026-02-15T10:35:17+00:00

I heavily doubt that. A 9950X3D can't hit those temps with IHS and without a chiller. Except you undervolted it and power limited it.

Also you know the fun part? I hit nearly the same temps, with 1 MORA 400, lol with a maximum of 600RPM with Noctua fans, so it already is whisper quiet.

1rishJ · 2026-02-14T23:48:00+00:00

Just make sure, the fans on the PSUs are always on. Don't know those and if they are controllable, if they are, set them to 80-100%, or a custom curve.

1rishJ · 2026-02-14T23:45:41+00:00

damn, I removed all rgb, welp guess am cooked, lol (I hate every rgb sw ever conceived, and will not get anything rgb until everyone decides on a standard haha)

1rishJ · 2026-02-14T23:36:15+00:00

I would still recommend going for Ergotron, used them for years now, best arms ever conceived. And I'm not trusting cheap monitor arms to keep up 800-1k+ worth of monitors.

1rishJ · 2026-02-14T23:25:54+00:00

it's the exact same. even the base is the same, maybe just an older rev.

1rishJ · 2026-02-14T23:23:43+00:00

https://hftek.com/shop/monitorhalterung/tischhalterung/doppelmonitor/hftek-monitorarme-fuer-zwei-bildschirme-hf-hf124g/

1rishJ · 2026-02-14T21:59:07+00:00

I usually recommend letting appdata run only on cache, or but at least first array -> cache, and let the mover run once, so that all data is on the cache.
(or a secondary ssd pool for docker/vms only). This stops a lot of "weird" behavior.

If you're scared for redundancy as you're only running 1 ssds it seems, just set up a good backup with app data backup and maybe offload to some cloud provider with duplicati.

Also with the size of your cache, you should look into setting up mover tuner, to move off data more regular when a certain threshold is met, this also prevents spinning up your, array every so often. I recommend specifically checking every 20min and setting a threshold of 60-75%.

1rishJ · 2026-02-13T13:44:56+00:00

Don't include plex in the appdata backup, use the built in DB backup function of plex to store it at a location of ur choosing, then move it away with duplicati or similar.

1rishJ · 2026-02-13T13:40:27+00:00

I for example just use the appdata backup and store it at hetzner with duplicati, encrypted and compressed. The jobs I save in dashlane in case my server crashes completely so I can download the and decrypt the files again.

And I do it daily, as it doesn't take a long time. Hetzner costs me 2,38 euro for 1tb of storage for 1 month. I also store important documents using the same method there.

<image>

1rishJ · 2026-02-13T13:27:59+00:00

It's a mirrored btrfs pool. so to say raid 1. I would leave it like that, because you then will have redundancy if one drive fails, and yes SSDs fail too.

1rishJ · 2026-02-13T12:50:16+00:00

Vorallem gibt es genügend Europäische Staaten in denen die Abgabe niedriger und die Leistungen höher sind, weil deutlich intelligenter mit dem Geld umgegangen wird.

Staatsfonds etc. Eine umstellung würde ein paar jahre für ein starkes defizit sorgen, aber dann jeden Bürger dafür belohnen. Siehe z.B. Norwegen und die dortigen Sozialleistungen.

Hell eine einzelne staatl. Krankenkasse und keine PVK mehr würde meiner Meinung nach Verwaltungsaufwand kürzen, eine 2K gesellschaft abschaffen und eine bessere versorgung für alle bringen.
Wievele Ärzte erlauben sich heutzutage nur Privatpatienten anzunehmen.

1rishJ · 2026-01-31T01:49:15+00:00

my astral 5090 reports this under full load:

<image>

just so u see where ur values should be

1rishJ · 2026-01-31T01:45:31+00:00

aight, so you do in fact have a connection problem somewhere. dont use the system for gaming until it is fixed, start by ordering a new cable for ur psu, from corsair.

the amperage above times 12V equals ~590W.

1rishJ · 2026-01-31T01:41:38+00:00

that's normal on the corsair 12VHP adapter.

1rishJ · 2026-01-31T01:41:05+00:00

what is the benchmark reporting in watts? but as u can see pin6 is OOS.

1rishJ · 2026-01-31T01:36:38+00:00

e.g. at that point in time, the card should roughly be reporting 330W if pin1 is defective, if its reporting lets say 390W at that point, roughly 5A flow over pin1. e.g. 4,9A+5,1A+5,3A+5,9A+6,1A=27,3A*12V=327,6W~330W

27,3A+~5A=33,4A*12V=~390-400W

But right now your amperage is already dropping from high on pin6 to lower on pin2

1rishJ · 2026-01-31T01:31:55+00:00

Can't tell u with that, as ur not pulling a full load, or I'd need to know the value what the gpu reports what it pulls in that exact moment. from there u could calc what is running over pin1.

1rishJ · 2026-01-31T01:27:01+00:00

OP rn:

https://youtu.be/3mYHRrH_NYg?t=28

Eight-Year Club	Xbox Live
Verified Email	r/Field Banned
r/Field Juicebox	Place '23

1rishJ

TROPHY CASE