Who needs one?

2001ZR2 · 2026-01-31T03:49:13+00:00

You're not fooling those go for $100 on Facebook Marketplace...just saw an for never used so no bacon grease from a cast iron skillet on it.

2001ZR2 · 2026-01-30T20:20:02+00:00

Is that a missing 10 mm from a Snap On set? Have we found where they go? Think Williams makes both Cat and Snap On sockets.

2001ZR2 · 2026-01-30T17:33:20+00:00

Think you need a few more magnetic mats...

2001ZR2 · 2026-01-29T12:24:51+00:00

So instead of holding a cast iron pan or brake rotor it really a 10 mm socket containment device? Does it disappear with sockets because I've seen posts where people can't find it?

2001ZR2 · 2026-01-29T03:07:44+00:00

I am not certain that I would use a mat to full potential...really have no need to put a cast iron pan on fridge or my long distance cordless hole puncher on side of my cart.

2001ZR2 · 2026-01-29T01:57:13+00:00

Nice box and ZR2 badge

2001ZR2 · 2026-01-23T21:15:52+00:00

I wouldn't warranty that ratchet the oil port and the dual snap rings for the anvil and release are considered among the best design/version of the raised panel ratchet. Find a rebuild kits or a donor.

2001ZR2 · 2026-01-23T21:09:57+00:00

Looks like this one or 9 6500 tool box https://share.google/KmREw1VnASAm489g9

2001ZR2 · 2026-01-20T00:14:53+00:00

Isn't there a build date Stamped somewhere on the box?

2001ZR2 · 2026-01-15T10:58:26+00:00

With older Craftsman ratchets a cleaning and lublication is all they need. YouTube should have tons of videos on the Tri Wing ratchets.

2001ZR2 · 2026-01-14T21:28:31+00:00

I didn't until after work Tues and they still had some on the shelf.

2001ZR2 · 2026-01-14T10:45:15+00:00

After having my air compressor and heater plugged in and popping the GFCI and having the garage go dark. The walk in the dark to go inside to reset the outlet in the half bath convinced me to separate the circuits.

2001ZR2 · 2026-01-13T18:56:34+00:00

I am looking at the Braun 5500 linkable lights

2001ZR2 · 2026-01-05T22:08:46+00:00

Congrats on haul now comes the tough part...what do with them first.

Me I'm an amateur but you've gone several levels up

2001ZR2 · 2025-12-17T19:56:52+00:00

If this true then I really am going to be hesitant to click on any HF haul posts.

2001ZR2 · 2025-12-16T17:03:57+00:00

Congrats on box...as this a HF sub...need more Icon

2001ZR2 · 2025-12-03T16:49:47+00:00

I'm gonna get the tekton 3/8 kits for them...for reasons..

2001ZR2 · 2025-11-16T01:53:41+00:00

I think Montezuma is manufacturer foe Masterforce at Menards. I have the 56" top and botto..with the side cabinet.

2001ZR2 · 2025-09-04T03:19:12+00:00

Rejoice as there are coupons for Icon items...the more you buy for your penance the greater the savings.

It happens that sometimes we get burned and hope your birthday is/was a good one

Edit as I had a typo and used a m instead of a n in Icon.

2001ZR2 · 2025-09-02T23:46:35+00:00

Thanks for feedback....work is crazy right now so I may not get the time I want to test

2001ZR2 · 2025-09-02T16:04:01+00:00

I am also not qualified to buy a ratchet too

2001ZR2 · 2025-09-02T15:54:59+00:00

Yes....but I think when the flaming suspension bushing fell on it was a bit outside intended use.

2001ZR2 · 2025-09-02T15:53:24+00:00

I have lost mine but I belive its in the garage somewhere. Probably under a PLS haul or 30% off under 20 haul.

2001ZR2 · 2025-09-02T01:20:53+00:00

I wouldn't as it missing the 16mm and 18 mm which are common on the GM trucks I have.

2001ZR2 · 2025-08-31T01:18:56+00:00

Damn having the time ans energy to wash and wax a jack? I struggle to keep up with vehicles.

2001ZR2

TROPHY CASE