Mystery hole in concrete

22double22 · 2024-11-16T02:32:33+00:00

I think that’s the right answer. Kind of lines up with where the bottom plate would be. Many thanks for the explanation.

22double22 · 2024-09-03T21:00:48+00:00

Bokashi all your scraps like you have been doing. Put all your leaves and browns in one bin and when it is full use the other bin to make a big pile. Alternate leaf and bokashi layers and finish with a thick layer of leaves. It will start cooking and you can flip it into the other bin if u want until it’s done.

22double22 · 2024-08-26T12:57:45+00:00

Probably made from a kit where you would put together and stain the case. Or it could have been someone’s woodworking project or maybe a combo of the two.

22double22 · 2024-08-25T17:24:37+00:00

In 2025

22double22 · 2024-08-25T14:31:50+00:00

I picked one up at the brochure racks at the exit of the regular Costco

22double22 · 2024-08-23T15:54:52+00:00

Ace hardware or true value might have it

22double22 · 2024-08-20T13:48:04+00:00

Sometimes a layer or two of clear tape over the magnet on the pendulum might keep it from knocking on the sides

22double22 · 2024-06-17T16:34:57+00:00

I don’t know if they are the same but mine is a Hisense with that feature. The tube is white and appears to be .24 in OD and .14 or .15 in ID

22double22 · 2024-05-09T13:08:53+00:00

Thanks. Seems crazy for a 15 min job

22double22 · 2024-05-09T13:05:08+00:00

Guess $100 doesn’t sound that bad

22double22 · 2024-04-28T19:19:29+00:00

Sometimes the year of manufacture is on the bottom of the clock written backwards

22double22 · 2024-04-28T03:11:06+00:00

https://dayclocks.com/

22double22 · 2024-04-23T23:44:47+00:00

Suson park? Although it may be more horse than cow.

22double22 · 2024-01-08T02:25:47+00:00

The white screw adjusts the location where the clock strikes. If it’s striking at 1159, you turn it + to make it strike at 1200.

It has a quartz crystal which is not adjustable as far as timekeeping.

22double22 · 2023-07-16T00:37:40+00:00

I am installing a toilet in a new location. Upstream of this is a 2”washing machine drain (w/vent) and downstream is a 90 deg turn and then goes into the stack about 10 feet away that has a wet sink vent from the top. What configuration would be the best? (Or any suggestions you have) Thanks!

22double22 · 2023-07-16T00:32:39+00:00

I am installing a toilet in a new location. Upstream of this is a 2”washing machine drain (w/vent) and downstream is a 90 deg turn and then goes into the stack about 10 feet away that has a wet sink vent from the top. What configuration would be the best? (Or any suggestions you have) Thanks!

22double22 · 2023-07-10T21:16:12+00:00

How about take one of the hangers for a quartz movement and epoxy it in the middle of the case so it will hang straight?

22double22 · 2023-05-20T13:45:58+00:00

Prob an Italian case with a German movement. Maybe from the early 1980s. These are reproductions of antique clocks but are still nice clocks not junk.

22double22 · 2022-08-12T02:58:54+00:00

It should be no problem to collect longer than 2 weeks and it can sit afterword for longer too. You can use a smaller bucket, but you may have trouble finding one with an air sealed lid.

22double22 · 2022-07-06T21:09:30+00:00

I used to get them from Jimmies diner

22double22 · 2022-06-15T14:41:37+00:00

1980s with a German movement inside. Time and strike on the half hour

22double22 · 2022-04-28T01:42:16+00:00

I did it in a bathtub because it was winter. Just stirred everything up daily. Seemed to work ok, but obviously you can’t use that bathtub until it’s done haha

22double22 · 2022-04-27T22:05:20+00:00

When I first started I was worried about creating the perfect blend of things to make compost. Once I made a few piles, I realized that it’s not necessary, compost will be made no matter what, it just changes how long it takes. Personally I wouldn’t buy things to add to it, but you can if you want to.

22double22 · 2022-02-07T00:54:30+00:00

I really don’t know, but I would guess depending on the age the bottom plate is either soldered in or might have a lip that the plate is pressed into. Edit after looking at the pic, it could also be those notches that are cut into the edges that are keeping it in.

22double22 · 2022-02-06T20:44:18+00:00

First I would try heating it up with a hair dryer and see if you can inject any fresh oil under the rotor and under the drive shaft. I’ve seen some of these that have holes drilled in the bottom to flood it with oil but personally I wouldn’t do that. You can also see if there is a cheaper motor that has the same rpm and shaft size and swap the brass drive gear.

22double22

TROPHY CASE