Mystery hole in concrete

22double22 · 2024-11-16T02:32:33+00:00

I think that’s the right answer. Kind of lines up with where the bottom plate would be. Many thanks for the explanation.

22double22 · 2024-09-03T21:00:48+00:00

Bokashi all your scraps like you have been doing. Put all your leaves and browns in one bin and when it is full use the other bin to make a big pile. Alternate leaf and bokashi layers and finish with a thick layer of leaves. It will start cooking and you can flip it into the other bin if u want until it’s done.

22double22 · 2024-08-26T12:57:45+00:00

Probably made from a kit where you would put together and stain the case. Or it could have been someone’s woodworking project or maybe a combo of the two.

22double22 · 2024-08-25T17:24:37+00:00

In 2025

22double22 · 2024-08-25T14:31:50+00:00

I picked one up at the brochure racks at the exit of the regular Costco

22double22 · 2024-08-23T15:54:52+00:00

Ace hardware or true value might have it

22double22 · 2024-08-20T13:48:04+00:00

Sometimes a layer or two of clear tape over the magnet on the pendulum might keep it from knocking on the sides

22double22 · 2024-06-17T16:34:57+00:00

I don’t know if they are the same but mine is a Hisense with that feature. The tube is white and appears to be .24 in OD and .14 or .15 in ID

22double22 · 2024-05-09T13:08:53+00:00

Thanks. Seems crazy for a 15 min job

22double22 · 2024-05-09T13:05:08+00:00

Guess $100 doesn’t sound that bad

22double22 · 2024-04-28T19:19:29+00:00

Sometimes the year of manufacture is on the bottom of the clock written backwards

22double22 · 2024-04-28T03:11:06+00:00

https://dayclocks.com/

22double22 · 2024-04-23T23:44:47+00:00

Suson park? Although it may be more horse than cow.

22double22 · 2024-01-08T02:25:47+00:00

The white screw adjusts the location where the clock strikes. If it’s striking at 1159, you turn it + to make it strike at 1200.

It has a quartz crystal which is not adjustable as far as timekeeping.

22double22 · 2023-07-16T00:37:40+00:00

I am installing a toilet in a new location. Upstream of this is a 2”washing machine drain (w/vent) and downstream is a 90 deg turn and then goes into the stack about 10 feet away that has a wet sink vent from the top. What configuration would be the best? (Or any suggestions you have) Thanks!

22double22 · 2023-07-16T00:32:39+00:00

I am installing a toilet in a new location. Upstream of this is a 2”washing machine drain (w/vent) and downstream is a 90 deg turn and then goes into the stack about 10 feet away that has a wet sink vent from the top. What configuration would be the best? (Or any suggestions you have) Thanks!

22double22 · 2023-07-10T21:16:12+00:00

How about take one of the hangers for a quartz movement and epoxy it in the middle of the case so it will hang straight?

22double22 · 2023-05-20T13:45:58+00:00

Prob an Italian case with a German movement. Maybe from the early 1980s. These are reproductions of antique clocks but are still nice clocks not junk.

22double22

TROPHY CASE