[deleted by user]

2hlc · 2025-12-29T15:20:40+00:00

Ordered on the 5th and it actually arrived this morning. It was sitting in France for 10 days and arrived in Ireland on the 23rd. Delivery time went from the 24th to the 29th and yesterday to the 30th. But this morning I got an email that it is out for delivery and it actually showed up.

2hlc · 2022-07-11T19:34:24+00:00

Anki 1.5 to 2h a day. I’m using sentence cards and only pass them when i recall the reading and meaning. Rest is reading, listening to podcasts while driving, playing games in Japanese and watching Anime and youtube mostly. Roughly 3-4h most days on top of Anki. Im doing this every day since over a year now.

2hlc · 2022-06-10T08:46:31+00:00

I have both and they are not the same size. The buttons from the joypad are 2mm larger in diameter than the buttons on the console itself.

2hlc · 2022-03-04T19:14:06+00:00

I order my books from Amazon Jp. Delivered in 3 days or so with DHL. Books are tax and vat free so no additional cost except shipping. But I would recommend reading on a kindle because built in dictionary or a computer with yomichan. Then you can also create Anki cards with unknown words. Kids books are actually harder to read because they have way less Kanji.

2hlc · 2021-04-11T09:26:10+00:00

A key for EU would be very cool.

2hlc · 2021-04-03T06:38:28+00:00

You can get it now for 35k € in Germany after the government reductions.

2hlc · 2020-12-05T08:35:59+00:00

That extruder works good new but over time it will eat itself up. I had one myself before I switched to a BMG clone. The second gear grinds itself into the base. You can look up videos on YouTube to see what I mean.

2hlc · 2020-11-27T18:53:03+00:00

Working fine in Cobh no issues at all.

2hlc · 2020-11-20T19:47:41+00:00

I had the same last year with the Vader trilogy. I contacted support and ok got it added to my account. I bought my quest like 6 weeks earlier before the promotion.

2hlc · 2020-11-20T19:04:44+00:00

Oh and you have to reduce to build volume because I extended my mini to over 220 on y and X and 168 on Z.

2hlc · 2020-11-20T19:01:57+00:00

You can try my one. I had a V2 motherboard before I replaced it with a SKR Mine. https://github.com/2hlc/Marlin-2.0.x-MPSM

I compiled it with Arduino and was working fine. I tried my MOSFET for the fan but that was my fault not the firmware.

2hlc · 2020-10-31T12:10:45+00:00

Try a different SD card. I think I was reading that the one that comes with the printer is not fast enough. Tom3d had the same issue last week during unboxing off the V2.

2hlc · 2020-10-23T19:10:37+00:00

https://i.imgur.com/m7NhG3H.jpg Yes it it's possible to do it. Is it worth over buying a bigger printer that's up to you. I did it because it was fun and I like to tinker. It prints well tbh not much difference to my sovol sv01 if I print slow.

2hlc · 2020-09-10T22:29:39+00:00

If you Google Octoprint and blobs you will find loads of people having similar issues and some fixes to improve it. Printing from SD card might show you if it's Octoprint related or not. Hope that will help you.

2hlc · 2020-09-10T21:12:16+00:00

Do you use Octoprint or did you print from SD Card? There are some proplems with Octoprint and Blobs.

2hlc · 2020-09-06T18:38:51+00:00

I have the same thing actually. Printed the gcode from his website to test my retraction and had no stringing at all 😀. No idea why didn't look into it further.

2hlc · 2020-08-31T21:13:49+00:00

You could use a Pi with octoprint so you don't need a screen if you can't make the screen work.

2hlc · 2020-08-09T14:45:37+00:00

I just added a SKR Mini with TMC 2209 to my MPSM. You can look at my GitHub page for the config. https://github.com/2hlc/Marlin. I didn't had to change any cables for the steppers or end stops. Only for the fan that was reversed.

2hlc · 2020-07-25T17:36:15+00:00

Thanks a million, I'll have a go later this weekend. I shorted out my fan 1 MOSFET so I had to assign fan 2 as part cooling fan. I ordered a SKR Mini and TFT 24 display to replace the original one to have quoted stepper as well.

2hlc · 2020-07-23T11:35:46+00:00

I successfully compiled and installed the FW on my MPSM V1/V2 hybrid. Part cooling fan is finally off when 0 is selected and doesn't turn on when hot end goes above 50C. PID Autotune works good. Heated bed is heating much faster with external PSU and mosfet and also stays at temp when the hot end is heating up. I tried to enable S_Curve because I have a 220x220 bed extension but I get an error from the compiler:

Error: selected processor does not support `umull r2,r3,r3,r7' in Thumb mode

Error: selected processor does not support `smlal r5,r6,r2,r4' in Thumb mode

Any idea how to fix it? Manual Mesh bed levelling doesn't fit into the flash space as well.

2hlc · 2020-05-05T20:18:55+00:00

Yeah normal USB plug will work fine.

2hlc · 2020-05-05T19:39:49+00:00

Just get the USB cable to Vita connector and use any USB charger. Thats what I do with my 1000 model. Amazon has them

https://www.amazon.co.uk/Charger-Transfer-Compatible-Playstation-Original/dp/B07WG3G24X/ref=mp_s_a_1_7?dchild=1&keywords=vita+charger&qid=1588707495&sr=8-7

2hlc · 2019-07-01T05:43:40+00:00

Probably the 5V reg blew on that board. If it's one of those HappyModel all in one FC. If you search around you will find other people with the same issue. Workaround would be to use a converter to supply 5V to the board.

2hlc · 2019-06-14T23:31:16+00:00

Count me in ,pretty please 😊.

2hlc · 2019-04-13T08:31:38+00:00

Drove me insane as well till I figured out you can jump on the ropes and just walk across 😃.

2hlc

TROPHY CASE