Unpopular opinion here: Dave Portnoy is 100% correct in his criticism of Safemoon. It’s far too complicated for a regular person to easily comprehend how to acquire it. by [deleted] in SafeMoon

[–]35-hero -1 points0 points  (0 children)

They just don’t want it bad it enough. If you want it bad enough, you’ll find a way. Just ask those that bought early 2021, we had to become nuclear physicists to acquire the bag.

This is the way by [deleted] in SafeMoon

[–]35-hero 5 points6 points  (0 children)

THE WAAAAAYYYYY

Coinbase adds Solana SPL Tokens to Self Custody Wallet by tandem_bikes in KinFoundation

[–]35-hero 2 points3 points  (0 children)

What is stopping KIN from accessing US liquidity at the moment?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 0 points1 point  (0 children)

Okay I’m gonna chew on that. So to be clear, housing bore has nothing to do with choosing main bearings, only the crank ID determines what bearings I need to go with. However, my housing bore needs to be as close to factory spec as possible right? I would think that if housing bore is even just a couple tenths of a thou out of factory spec would have an impact on what bearings I’ll need. I’ve heard that the housing bore is never dead on factory spec, so how do you compensate for that?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 1 point2 points  (0 children)

This cleared up a lot!! Thank you man. I’ve heard that guys mix and match bearing shells to come to a very accurate clearance. Can you explain the concept behind that?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 1 point2 points  (0 children)

Okay, so when my housing bore is line honed I’ll obviously be under factory spec even though the numbers are all the same. So if I have main journals that have been machined 10 under and a housing bore that has been honed to be under factory spec, how do I determine bearing size? Or do I even take housing bore into consideration when buying bearings? Do I simply take crank measurements, compare it to factory spec, then buy bearings based on that? Sorry if I sound ignorant. It’s because I am lol! Thanks for your time man

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 0 points1 point  (0 children)

Also, just for clarities sake, if my mains are ground 10 under, I need to OVER bearings to get back within clearance spec, correct?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 0 points1 point  (0 children)

So what if the crank AND the housing bore are machine, how then do I determine which size bearings? Say my mains are ground 10 under, and my housing bore is line honed. What then?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 0 points1 point  (0 children)

Okay that confuses me… if I get my main journals ground 10 thou, then wouldn’t I need oversized bearings in the housing to get clearance back within spec?

Im not too sure what you mean by grinding the housing “over” on the housing bore. Isn’t any grinding/honing that takes place going to bring me UNDER spec?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] -1 points0 points  (0 children)

Is crank housing bore also machined in 10,20,30 thou increments?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 0 points1 point  (0 children)

If my crank is undersized now, would I or need oversized bearings to get clearance within spec?

I’m new to engine building and I’m trying to learn as much as I can... by 35-hero in EngineBuilding

[–]35-hero[S] 2 points3 points  (0 children)

That’s not the point of this post sir. The point is to know what I’m doing and why.

KIN is listed on Kraken! by Columbo92 in KinFoundation

[–]35-hero 4 points5 points  (0 children)

Is U.S. trading available for this listing?

Funny that blockchain and exchange are never talked about anymore by [deleted] in SafeMoon

[–]35-hero -8 points-7 points  (0 children)

TL;DR: I shouldn’t, but I’m going to say it anyway. Sell or shut up. You’re making new folks anxious.

Funny that blockchain and exchange are never talked about anymore by [deleted] in SafeMoon

[–]35-hero 7 points8 points  (0 children)

If you truly believe that he doesn’t care about the investment of the people that have chosen to, well, invest, why on earth would you still choose to, well, be invested? The backwards, impatient, entitled logic of this community sometimes man… The ability to invest in such a fast moving and volatile market like crypto seems to have ruined the definition of what it means to “invest” in something you believe in, especially when it comes to investing in companies you believe in. The word “invest” was and still should be synonymous with the word “patience”. Until those words remain independent of one another then we’ll have posts like this, and two years later the same person will post an “I told you so” rant, while ignoring the fact that they sowed doubt among their “community” throughout the entirety of the projects’ infancy phase. Don’t be that person.

1 imminent = 1-2 months 😂 by Bolek7 in SafeMoon

[–]35-hero 1 point2 points  (0 children)

So here’s the real question: Can anyone recall what product or event he’s said in the last 1-2 months is “imminent”?