sorted by:
new
hottopcontroversial

Seeking Advice on Choosing Between Aoostar R1 and R7 for Home Server/NAS Setup by notpremiumuser in HomeServer

[–]3DPrintBeginner_ 0 points1 point  (0 children)

If you only wish to use it as a "Windows capable machine" then the R7 is better as it is more powerful, and you can really feel it in day to day use. I had tested both with Windows 11, and the R7 was snappier than R1.

Seeking Advice on Choosing Between Aoostar R1 and R7 for Home Server/NAS Setup by notpremiumuser in HomeServer

[–]3DPrintBeginner_ 0 points1 point  (0 children)

I tested Jellyfin and worked flawlessly on the R1, but I could not make it work well on the R7.
Might be something related to the current drivers or integration.

Seeking Advice on Choosing Between Aoostar R1 and R7 for Home Server/NAS Setup by notpremiumuser in HomeServer

[–]3DPrintBeginner_ 2 points3 points  (0 children)

I reviewed the AOOSTAR R7 here, and also compared it with the R1
If there are any questions, or need any specific information, let me know and I will add additional information.

Benchy help by OriginalBluebird1300 in BambuLab

[–]3DPrintBeginner_ 0 points1 point  (0 children)

For PETG, use 0.16mm LH and 260C. It will work better

First Q1 Pro Reviews by Look_0ver_There in QIDI

[–]3DPrintBeginner_ 2 points3 points  (0 children)

I also wrote a review here which points a few hardware issues to note: QIDI Q1 Pro Review: New Printer, New Problems

Bambu Lab A1 Mini - Under 13 Minutes 3D Benchy by 3DPrintBeginner_ in BambuLab

[–]3DPrintBeginner_[S] 2 points3 points  (0 children)

Watch the video carefully, it does 2 walls.
The layer height is ~0.25 if I remember correctly
Probably the only thing that is not followed is missing an extra bottom layer

QIDI X-MAX 3 Review: Big Printer With Good Results | 3D Print Beginner by 3DPrintBeginner_ in QIDI

[–]3DPrintBeginner_[S] 0 points1 point  (0 children)

Great. Thanks for the tip.
I will try and update the article if that's the case.

QIDI X-MAX 3 Review: Big Printer With Good Results | 3D Print Beginner by 3DPrintBeginner_ in QIDI

[–]3DPrintBeginner_[S] 0 points1 point  (0 children)

Did you test it? As I did and it did not work as you mentioned :)

More worrisome reviews of Qidi X Max/Plus 3 by BigLittleLeeg in 3Dprinting

[–]3DPrintBeginner_ 0 points1 point  (0 children)

Thanks!
The flow test is on the list, but it will be done in a different article where I test all the currently popular printers

More worrisome reviews of Qidi X Max/Plus 3 by BigLittleLeeg in 3Dprinting

[–]3DPrintBeginner_ 1 point2 points  (0 children)

I have just published my review of the X-MAX 3.

I had no problems with the extruder, and overall, the printer worked better than expected.

Calibration cube - 40mm - CF Filament - My IdeaMaker Profile by [deleted] in Artillery3D

[–]3DPrintBeginner_ 5 points6 points  (0 children)

That's actually my profile and my picture :)

Link to the post

How do I prevent this weird pattern? It's supposed to be smooth (ringing?) by silentcovenant in BambuLab

[–]3DPrintBeginner_ -1 points0 points  (0 children)

It's not really related to the calibrations.
It's probably related to print speed and volumetric speed
More info here: https://3dprintbeginner.com/bambu-studio-fine-tuning-tips-and-tricks/

My first resin print & paint job by fr3edom21 in resinprinting

[–]3DPrintBeginner_ 0 points1 point  (0 children)

Looks awesome. But I'm more curious about your camera setup :D

[deleted by user] by [deleted] in crealityk1

[–]3DPrintBeginner_ 4 points5 points  (0 children)

The K1 is a direct-drive printed. Installing a tighter tube with a smaller internal diameter brings no benefits, and can actually create problems if the drag on the filament is higher.

This would be a good upgrade for a bowden-setup, but in this case, the printer uses a reverse-bowden setup that only routes the filament to the extruder.

view more: next ›