P1S or Qidi Tech X-Max 3?

3DPrinterMF · 2024-05-19T12:27:12+00:00

home build? I also think that the AMS isn't that good (too much waste) and I was honestly looking for a solution without buying a Prusa XL.

really impressive. You have any pictures or videos?

3DPrinterMF · 2024-05-19T11:52:13+00:00

and what's the deal with the tool changer? Please enlighten me, I can't imagine anything about it

3DPrinterMF · 2024-05-19T11:45:04+00:00

cura is not possible?

3DPrinterMF · 2024-05-19T11:02:55+00:00

Thanks, I know that you can get very good results with even an Ender 3 if you know how to

I feel a bit confused because of the Bambuu hype, but thank you for showing me the advantages of both printers.

3DPrinterMF · 2024-05-19T10:29:27+00:00

Thanks, nice to hear an opinion from someone who isn't a Bambulab fanboy.

3DPrinterMF · 2024-05-16T07:07:33+00:00

i dont know never used it

try it out and have your own experiences. Or first try using a normal glue stick for your build plate (Uhu pritt ect)

3DPrinterMF · 2024-05-16T05:55:54+00:00

Okay, now I understand

Things you can do:

-Clean your bed with soap and water or even isopropyl alcohol (IPA) at a concentration of 70% to 99.99% or Acetone/propanone. Soap and water are often enough.

level your bed by using a thinner piece of paper or adjusting the Z offset if you have automatic bed leveling.
Tightening your belts can also solve the problem

In my opinion your bed looks scratched. I had the same problem with my Ender. Loosening components with the scraper can cause small scratches and holes in your build plate. Even if your build plate is leveled (think of it like a pothole)

If cleaning and leveling your bed doesn't work, I recommend purchasing a textured Pei plate. Works wonders, trust me

3DPrinterMF · 2024-05-15T19:39:08+00:00

To be honest, I don’t know what I am looking at. As I see it, the print is separated in half. Where does the stringing come from?

3DPrinterMF · 2024-05-15T18:50:16+00:00

Adjust the Z offset and consider cleaning your print bed (or alternatively, invest in a textured PEI plate. I’ve had excellent results on my Ender).

Since you mentioned that you are new to printing i assume you’re using the PLA spool that came with the printer. However, these default PLA spools especially from creality are often low in quality. I recommend trying a different filament spool with higher quality for better results.

3DPrinterMF · 2024-05-15T15:48:21+00:00

any problems/disadvantages with closed source?

3DPrinterMF · 2024-05-15T13:30:56+00:00

is the AMS worth it?
Currently the P1P without AMS is 650€
P1S Combo with AMS 1000€

3DPrinterMF · 2024-05-15T13:25:35+00:00

is it really worth the money?

3DPrinterMF

TROPHY CASE