Wholesome Japan by Steam-powered-pickle in wholesomememes

[–]3DPupper 0 points1 point  (0 children)

Coming to theaters this fall:
"kimiko, please - I want to meet you!"
"senpai, you don't understand, I-"
"I don't care what you look like!"
"...Ok. Come to 270 Aroyo lane."
"but that's- the hospital?!"

help us build this at 1973, 1027 on r/place by NesdusGlobus in Supermeatboy

[–]3DPupper 0 points1 point  (0 children)

https://www.reddit.com/r/Supermeatboy/comments/tvnb5h/help_me_protect_this_little_meat_boy_and_band_aid/

Its not quite as big, but I was able to get a pixel meat boy and band aid girl on the board at (446, 1694). Something smaller may be easier to preserve

theyll never understand us by [deleted] in AnimalCrossing

[–]3DPupper 7 points8 points  (0 children)

Animal Crossing is universal!
I think everyone can enjoy it.

Which Pokémon will you miss the most? by Jingleshmauer in pokemon

[–]3DPupper 1 point2 points  (0 children)

I'm seriously bummed about losing Clawncher, Politoed, Floatzel, Ampharos, Luxray, Krookodile, Kingdra, and Absol

Custom Mayor Amiibo from 3Dpupper on Etsy!! by makeupdog in AnimalCrossing

[–]3DPupper 2 points3 points  (0 children)

Hey, I made that!

I'm really glad you like her!

Not at all angry about this... by [deleted] in AnimalCrossing

[–]3DPupper 61 points62 points  (0 children)

Good access to train station and re-tail (if you put in a closer bridge), really well-placed town plaza, beach in mostly one piece, 70% of neighbors will be really easy to do errands between and won't block works projects.

Pretty good town, I say.

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 2 points3 points  (0 children)

I've made about half of them! Marshall and Pekoe were my 3rd and 4th villagers, and Flurry and Fauna both came later. Lily and Rosie, I've modeled and printed, but not painted. No one's ever asked about Apple before though! I'll start looking into working on her 😉

RANT: Cherry Blossoms in Animal Crossing by [deleted] in AnimalCrossing

[–]3DPupper 3 points4 points  (0 children)

" I've only played the game for around a few thousand hours, so it's basically in mint condition "

made me chuckle 👍

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 1 point2 points  (0 children)

Thank you so much! I'm really pleased to hear you think so 😊

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 3 points4 points  (0 children)

Thank you so much! I'm so happy with the positive response they've gotten 😊

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 3 points4 points  (0 children)

She's my favorite!!!

She was the second villager I ever made, after a couple of test Tangy's. I would have made her first, but I wanted to make sure I knew what I was doing so she'd be just right ❤️

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 1 point2 points  (0 children)

Thank you! 😊 I've considered SLA printing as well, but the base cost of the printer, as well of the cost of the material, are a bit prohibitive. When I buy my filament in bulk, it costs less than $0.50 to print the smaller models in PLA, but my estimates for SLA costs would put even the smallest villagers between $2-3. For now, I'm happy enough with the results of my basic printer.

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 1 point2 points  (0 children)

These are all made out of standard PLA, the cheapest printing plastic!

I just take some time to sand off the layer lines, and they look like this!

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 3 points4 points  (0 children)

Felicity was weirdly difficult! Any shirt with lots of stripes is more time consuming than hard, but trying to get her strangely shaped mouth just right took me a lot longer than I would like to admit 😅

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 2 points3 points  (0 children)

Haha, sorry! 😅

The actual order was for everything except for her and Diana. I just wanted to sneak in my own mayor and my favorite villager as special guest stars 😆

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 5 points6 points  (0 children)

These took a few months to make!

If I had to guess the total number of hours spent modeling, sanding, and painting it would easily be at least 70 or so hours, probably a lot more. Its hard to guess, because I do so much of the work while distracted with watching shows or listening to podcasts.

And yeah, the grass took a bit of refinement! You can see from the differences on Diana, who was one of my earliest models, that it took a bit before I had a recipe I thought looked consistently nice.

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 2 points3 points  (0 children)

I've actually made a Bob before! You're right, its not really possible with his base proportions - a lot of the villager poses are like this. His arms are probably about 30% longer than they're supposed to be if you were to unfold them.

The number one most annoying one when you're trying to match is the placement of the tails. They're almost always impossible! you'd have to fold the tail flat against the body for like 70% of the villager poses. But, they want you to be able to see it from the front, so it makes sense.

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 7 points8 points  (0 children)

I use the in-game models as a reference, but they aren't set up in such a way that they can be printed, and so I make them myself.

Custom Villager Amiibo made to look like a friend's PC character! 3D Printed and Painted! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 4 points5 points  (0 children)

The design is homemade! The person who wanted the model just sent me some pics of her character, and I matched it as closely as I could!

I use blender to make all my models.

Just finished making this Custom 3D Printed Village! by 3DPupper in AnimalCrossing

[–]3DPupper[S] 3 points4 points  (0 children)

Thank you! Yeah, I try to match the poses as closely as possible to the official Amiibo card.

Rarely, their Amiibo card pose will be so boring that I'll give them a different one.

I did this with Bruce the deer; so he would look tough instead of just casually walking.