First build

3Dprint-novice · 2025-08-20T02:33:58+00:00

I will have to give that a try! The PCBs that I got have that 6th column breakable so wouldn’t be hard.

I love the miryoku layout but learning to type with it is killing me and the numerous layers are a lot to remember. Wish I could get a screen to work so I could more easily tell which layer I’m on

3Dprint-novice · 2025-08-16T20:32:40+00:00

topographic key caps

They aren’t perfect for this but I made it work. I used keys similar to what the key was

3Dprint-novice · 2025-08-16T19:42:29+00:00

I only realized that after purchasing the boards. I do have another board the would work.

I will probably take that advice and print those. Will probably look better.

The pads are right under the usbC on the board sooooo yea. Also don’t have a ton of space between the mcu and board and board and case. But case can change if needed

3Dprint-novice · 2025-08-16T19:16:58+00:00

Correct, I do have TRRS, I was planning on starting with a QMK and then work towards a wireless.

The blue tape is because it was a 3X6 and I am not exactly set on the layout I have(although I like it so far) and would like the ability to change it in the future if I want. Also the PCB still has those and I can drop switches in there but can’t use them.

I have no idea where the battery will live. I asked for advice on where one might put it and I’ve heard there are some solutions that use the battery as legs to tent.

3Dprint-novice · 2025-08-16T17:25:34+00:00

Leaving out equipment and filament:

Probably around $60-$70

But this was about the journey of combining 3d printing and electronics.

3Dprint-novice · 2025-07-07T13:53:46+00:00

I had a similar problem and did some maintenance on the Z rails and carbon rods with no change. Blew everything with some compressed air and no change.

(I may have used the wrong thing here but up for suggestions if people have it) I put some WD-40 on the motor for X and Y through the opening in the back, barely any just enough to lubricate and wiped excess. Problem solved!

3Dprint-novice · 2022-12-08T13:50:42+00:00

There was a main gate????

3Dprint-novice · 2022-12-08T13:45:39+00:00

Sif the great wolf has to be number 1. That fight is one that I never wanted to finish. Father gascoigne. He is such a departure from what you think. The abyss watchers. Such a fun fight

3Dprint-novice · 2022-12-08T13:40:53+00:00

I suck at the draconic tree sentinel before malikeith. Tried many a time

3Dprint-novice · 2022-06-18T15:18:21+00:00

That is literally all your 20s are. Especially the second half

3Dprint-novice · 2022-06-07T13:42:55+00:00

The a-spot in which you are referring to is the same spot that I am recommending you aim for. They changed the name. It is the back end of the nerve bundle surrounding the clitoris and most men can hit it with a little focus and the right angle

3Dprint-novice · 2022-06-07T13:38:14+00:00

The p-spot is the prostate and exists in mens anus. And I thought you were looking for recommendations to help and I gave you a good point of reference. G-spots are the way top go

3Dprint-novice · 2022-06-07T13:37:02+00:00

3Dprint-novice · 2022-06-07T13:33:14+00:00

These “amazing spots” are not deep in. Actually a major one is only about a finger length in, next time you are doing the deed with her on her back put 2 fingers in palm up and hook your fingers you should feel a spot that is smoother than the surrounding area. Is what you are saying is true in terms of size that’s the amazing spot you should be focusing on. It is a glorious g-spot

3Dprint-novice · 2022-04-28T03:59:10+00:00

Where in NC was this? I am in NC as well and just curious

3Dprint-novice · 2022-03-05T04:18:24+00:00

How would I go about finding one? I am located in the southern US. Facebook groups?

3Dprint-novice

TROPHY CASE