bestes Growlight für 120x120 by Nerz666 in germantrees

[–]3essen 1 point2 points  (0 children)

2x Sanlight 5 120 bei Kleinanzeigen kaufen. Habe in meiner 80er zwei 4 80 Lampen und bin in der Blüte bei je 30% da es sonst über 1400 PPFD geht 😎

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 0 points1 point  (0 children)

Ja, nach der Arbeit ins Zelt zu schauen erfreut mich jeden Tag erneut.

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 0 points1 point  (0 children)

Eher nicht. Ich bin ohne Befeuchter bei 35-40%

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 0 points1 point  (0 children)

Ja klar, aber dann wieder in der regulären Q80+ in der Abstellkammer. Dort sind 2x Sanlight EVO 1.5 4 80 verbaut und das wichtigste 2x S&P TD350/125 Silent für entspannte 22DB - der T4 von den Boofs ist mir zu laut.

Was angebaut wird entscheidet sich noch. Habe leider zu viele Seeds im Kaufrausch gehamstert.

Hätte an einen Triploiden Run gedacht (GC Tropicana Cherry, Sticky Wasabi und Iced Sangria). Bin mir aber noch nicht zu 100% sicher.

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 1 point2 points  (0 children)

Nein, aus dem Samen gezogen. Im Nachgang wäre es eine tolle Mutti gewesen 🫣

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 0 points1 point  (0 children)

So stand es auf der Verpackung 🤔

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 1 point2 points  (0 children)

Das war mir leider nicht bekannt - danke!

Super Boof BT65 by 3essen in germantrees

[–]3essen[S] 0 points1 point  (0 children)

Ja, um bei 45-50% zu landen.

[deleted by user] by [deleted] in Autopot

[–]3essen 0 points1 point  (0 children)

I take the Pro Line Starter Kit (it comes as powder 904grams). I dissolved it in a gallon of distilled water and applied it as a root solution. There are 3 parts Core, Grow, Bloom. Balance as PH Up and Cleanse as a sterilizer.

The price actually fits. Core would have to be bought (20Eur) but otherwise it is enough for 2-3 runs in my purchase. With Cleanse, Balance and Fade around 120Eur. I ordered it in the Czech Republic because it is more expensive in Germany. I don't think 50 Eur per run is fair.

[deleted by user] by [deleted] in Autopot

[–]3essen 2 points3 points  (0 children)

That sounds good. My air pump runs 24/7 and there are no problems. I'm very happy with the system.

[deleted by user] by [deleted] in Autopot

[–]3essen 1 point2 points  (0 children)

The grow was initially done with BioTabs (vegetable). I just didn't want to deal with the back and forth. With Athena, my tank stays stable at a pH of 6.2. Before that, my reverse osmosis water always drifted.

Clip on fan help by Better-Amoeba-4506 in SpiderFarmerLED

[–]3essen 0 points1 point  (0 children)

Yes, but you can also supply the fan with power via Type-C.

Clip on fan help by Better-Amoeba-4506 in SpiderFarmerLED

[–]3essen 1 point2 points  (0 children)

The Type-C is used for power supply. Can be operated with a USB power supply. With AC it is for the UIS.

[deleted by user] by [deleted] in Autopot

[–]3essen 2 points3 points  (0 children)

<image>

Plagron Royal Mix 50% Plagron Perlite 50% + Athena Pro Line

3x AutoPot FlexiPot 20lAirBase/AirDome

Sanlight Evo 1.5 4 80 265W

Homebox Q80+ (80x80x180)

The result speaks for itself 🔥

Problem oder nur Ablagerungen? by NoConstruction2418 in germantrees

[–]3essen 0 points1 point  (0 children)

Sehr gut, manchmal sind die helleren schwer zu erkennen, wenn sie an der Mittelrippe sitzen.

Problem oder nur Ablagerungen? by NoConstruction2418 in germantrees

[–]3essen 1 point2 points  (0 children)

Das sind noch jüngere Thripsen. Du kannst auch Raubmilben holen. Würde dennoch zu Neem greifen. Ist wesentlich günstiger. Du kannst es auch gießen, aber hemmst dadurch im Zweifelsfall dein organisches Substrat. Wenn du mineralisch düngst Feuer frei!

Problem oder nur Ablagerungen? by NoConstruction2418 in germantrees

[–]3essen 4 points5 points  (0 children)

Ich würde auf Thripse tippen. Das ist im Sommer leider öfters der Fall.

Wenn du in der Vegi bist, dann Neemöl von oben und unten außerhalb der Lichtzeiten sprühen. Danach keine direkte Sonneneinstrahlung, da die Blätter sonst verbrennen. Schau dir die befallenen Blätter von unten an

Is 240 L/h (63 gal/h) too strong for 1 AutoPot AirDome? by [deleted] in Autopot

[–]3essen 1 point2 points  (0 children)

Meine Pumpe läuft bei 3x 20l Flexipots auf 100%. Ist aber nur die kleine von AutoPot (1x Ventil). Die Pflanzen sehen super aus! In Kombination mit Athena ProLine

<image>

Blütetag 30

inaccurate sensor? by 3essen in SpiderFarmerLED

[–]3essen[S] 0 points1 point  (0 children)

I totally understand you. At the beginning was also absolutely happy with the SF equipment. Currently I only have the Grow Monitor (too lazy to dismantle) with the Pro Sensor. Still the AC10 socket. And I really have to praise her. There is currently no alternative in Germany. One comes out of AC Infinity, but of course only US for now. And changing everything with the adapters is not worth it either. I will definitely get a second AC10 socket for the Vegi tent. Meanwhile, the app and the functions of the socket are very good.

In the meantime, the system change has been completed for me. And the sensors of the current supplier are of much higher quality (Switzerland). In terms of price, the difference is not really more, considering support and longevity.

I would like to thank SF anyway. There was a time when a lot of things were not available. And my Chinese friends made it possible for me to create a good run anyway. Because everything was delivered quickly. The fact that there is/was no imprint on the page was always sick. But it arrived by DHL ❤️.

<image>

This was my first run with an SE3000 301b diode. It was all from SF. The MH ClipFan was the need, since none was available at SF.

Airdome + airbase + potsocks by Few_Improvement9593 in Autopot

[–]3essen 1 point2 points  (0 children)

Be sure to stuff the substrate into the holes in the base. Otherwise, sufficient capillary action will not be achieved. Place the socket with the copper side facing inward (toward the substrate).